Pomona ® Model 6267 Oscilloscope Replacement Accessory Kit (Accessories are also included with each probe) FEATURES: • Sprung hook quickly attaches to the probe body and converts the tip to a hook for stronger test terminal retention. • BNC adapter attaches to the probe tip base and converts the tip to a push-on BNC (male) for optimum shield protection. • IC Tip Adapter attaches to the probe tip to allow single lead probing on through-hole DIP devices while preventing accidental adjacent pin shorting. • Insulated tip offers additional insulation protection around the probe tip base area to prevent accidental shorting. • Trimmer tool is used to match the frequency response of the probe to the oscilloscope. • Six inch (152,4) ground lead reduces signal distortion and leading edge ringing. ORDERING INFORMATION: Model: 6267 All dimensions are in inches. Tolerances (except noted): .xx = ±.02” (,51 mm), .xxx = ± .005” (,127 mm). All specifications are to the latest revisions. Specifications are subject to change without notice. Registered trademarks are the property of their respective companies. Made in USA 6/9/99 SY/EH/LS Sales: 800-490-2361 Fax: 888-403-3360 Technical Assistance: 800-241-2060 C:\Laura Goldberg\FlukeDataSheet\d6267_1_01.doc PomonaACCESS 90486 (800) 444-6785 or (425) 446-6010 More drawings available at www.pomonaelectronics.com Page 1 of 1