Model 6351 8mm Tip Reach, SMD Micro Grabber Test Clip FEATURES: Use with PQFP packages with 0.2mm lead pitch or greater. 8mm long tip allows measurement at IC leads that are not easily accessible. Thin body style allows an unlimited number of clips to be stacked side by side. Maximum frequency is 100 MHz. MATERIALS: Leads: Stainless-Steel Wire Tip Tubing: Teflon™ Coated Nickel Plated Copper Body: ABS Flying Lead Connection: Gold Plated Copper RATINGS: Operating Voltage: Hands free usage in controlled voltage environments: 70 Vrms maximum. For CE compliance: not intended for hand-held use at voltages above 33 Vrms/70 Vdc. ORDERING INFORMATION: Model 6351 (Kit contains ten test clips and ten flying leads) All dimensions are in inches. Tolerances (except noted): .xx = ±.02” (.51 mm), .xxx = ± .005” (.127 mm). All specifications are to the latest revisions. Specifications are subject to change without notice. Registered trademarks are the property of their respective companies. Sales: 800-490-2361 Fax: 425-446-5844 Technical Support: [email protected] 12/21/07 D1094647 Rev. 101 For “Where to Buy” information, visit the Pomona web site at www.pomonaelectronics.com Page 1 of 2 Model 6351 8mm Tip Reach, SMD Micro Grabber Test Clip All dimensions are in inches. Tolerances (except noted): .xx = ±.02” (.51 mm), .xxx = ± .005” (.127 mm). All specifications are to the latest revisions. Specifications are subject to change without notice. Registered trademarks are the property of their respective companies. Sales: 800-490-2361 Fax: 425-446-5844 Technical Support: [email protected] 12/21/07 D1094647 Rev. 101 For “Where to Buy” information, visit the Pomona web site at www.pomonaelectronics.com Page 2 of 2