Pomona ® Model 6365 IEC 1010 Compliant Replacement Test Lead Set For Sheathed Style DMM’s FEATURES: • Designed for Fluke, H-P, Tektronix and Wavetek DMM’s with a safety style of sheathed banana jack. • Probe body incorporates a two step mold process. First step is Polypropylene for probe rigidity. Second step is Santoprene® rubber for handling comfort, added insulation protection and wire strain relief. • Probe test leads are designed with over-voltage spike protection of up to 6kV. • Probe body and banana plug are molded directly to the wire for robust pull strength. • Wire is a high strand count silicone wire for extreme flexibility and high temperature resistance. • Banana plug spring is nickel-plated beryllium copper for long insertion life. MATERIALS: Probe Body: Outer Insulation - Santoprene® Rubber, Color: Gray Inner Insulation – Polypropylene, Fire Retardant, Color: One Black, One Red Tip: Brass Wire: 18 AWG, 65 x 36 Tinned Copper Stand, Silicone Insulation, Length: 48” (122cm), O.D. .144” (3,66mm) Banana Plug: Body – Brass, Nickel Plated Spring – Beryllium Copper, Nickel Plated Insulation – PVC, Color: One Black, One Red RATINGS: IEC 1010-2-031, Category III, P2 Compliant Operating Voltage: 1000 VRMS/DC Current: 10 Amperes ORDERING INFORMATION: Model 6365 Includes a set of one black and one red test lead All dimensions are in inches. Tolerances (except noted): .xx = ±.02” (,51 mm), .xxx = ± .005” (,127 mm). All specifications are to the latest revisions. Specifications are subject to change without notice. Registered trademarks are the property of their respective companies. Made in USA 6/9/99 SY/EH/LS Sales: 800-490-2361 Fax: 888-403-3360 Technical Assistance: 800-241-2060 C:\Laura Goldberg\FlukeDataSheet\d6365_1_01.doc PomonaACCESS 90732 (800) 444-6785 or (425) 446-6010 More drawings available at www.pomonaelectronics.com Page 1 of 1