POMONA 72984

Model 72984
SMB JACK STRAIGHT CRIMP, RG174, 188, 316
Model 72984 SMB JACK STRAIGHT CRIMP, RG174, 188, 316
Snap-on coupling and small
size for fast connect and
disconnect.
Features
Specifications
•
DC - 3 GHz bandwidth.
•
Meets MIL-C-39012, IEC 60169-1Q,
BS9210N0007, NFC93650, CECC 22130.
Impedance
50 Ω
•
Small size and durability for RF coaxial
applications.
Frequency Range
DC - 3 GHz
•
Precision machined and gold-plated for low loss.
VSWR
1.4 max.
Working Voltage
250 Vrms max.
Dielectric withstand voltage
750 Vrms
Center / Outer contact
resistance
6 / 1 mΩ
Number of insertions
500 cycles min.
Insulation resistance
1,000 MΩ min.
Temperature Range
-65˚ C to 165˚ C, -85˚
F to 329˚ F
Materials
•
•
•
•
•
Body is machined brass with gold plating.
Center contacts – Plug is gold plated brass and
Jack is gold plated beryllium copper.
High quality PTFE insulators.
Crimp Ferrules are nickel plated copper.
Silicone rubber gaskets.
Ordering Information
Model: 72984
Description: SMB JACK STRAIGHT CRIMP, RG174, 188,
316
USA: Sales: 800-490-2361
Technical Support: [email protected]
Fax: 425-446-5844
Europe: 31-(0) 40 2675 150
International: 425-446-5500
Where to Buy: www.pomonaelectronics.com
All dimensions are in inches. Tolerances (except noted): .xx = ±.02” (.51 mm),
.xxx = ± .005” (.127 mm). All specifications are to the latest revisions.
Specifications are subject to change without notice. Registered trademarks
are the property of their respective companies.
D2003424 REV 001
Copyright © 2007 10/19/2007
Page 1 of 2
Model 72984
SMB JACK STRAIGHT CRIMP, RG174, 188, 316
Cable Types and Crimp Die Information
Connector
Model #
Crimp Die Cavity Size
for Outer Ferrule
72984
RG174, 188, 316
Crimp Die
Cavity Size for
Outer Ferrule
.128 (3.3)
Cable Assembly Instructions
USA: Sales: 800-490-2361
Technical Support: [email protected]
Fax: 425-446-5844
Europe: 31-(0) 40 2675 150
International: 425-446-5500
Where to Buy: www.pomonaelectronics.com
All dimensions are in inches. Tolerances (except noted): .xx = ±.02” (.51 mm),
.xxx = ± .005” (.127 mm). All specifications are to the latest revisions.
Specifications are subject to change without notice. Registered trademarks
are the property of their respective companies.
D2003424 REV 001
Copyright © 2007 10/19/2007
Page 2 of 2