Model 73029 MMCX JACK STRAIGHT CRIMP, RG174, 316 Model 73029 MMCX JACK STRAIGHT CRIMP, RG174, 316 Snap-on coupling and microminiature size for fast connect and disconnect where space is limited Features • DC - 4 GHz bandwidth. • 50% smaller than MCX connectors. • Connectors allow rotation of 360˚ for layout flexibility. • Non-slotted contact design for low RF leakage. • • Impedance 50 Ω Frequency Range DC - 4 GHz Meets CECC 22340. Working Voltage 170 Vrms max. Perfect for applications where space, weight, performance and ease of assembly are required. Dielectric Withstanding Voltage 750 Vrms VSWR 1.3 max Center / Outer contact resistance 6 / 1 mΩ Number of insertions 500 cycles minimum Insulation resistance > 1000 MΩ Temperature Range -55˚ C to 155˚ C, -67˚ F to 311˚ F Materials • • • • Specifications Body is machined brass with gold plating. Center contacts – Plug is gold plated Phosphor bronze and Jack is gold plated beryllium copper. High quality PTFE insulators. Crimp Ferrules are gold or nickel plated copper. Ordering Information Model: 73029 Description: MMCX JACK STRAIGHT CRIMP, RG174, 316 USA: Sales: 800-490-2361 Technical Support: [email protected] Fax: 425-446-5844 Europe: 31-(0) 40 2675 150 International: 425-446-5500 Where to Buy: www.pomonaelectronics.com All dimensions are in inches. Tolerances (except noted): .xx = ±.02” (.51 mm), .xxx = ± .005” (.127 mm). All specifications are to the latest revisions. Specifications are subject to change without notice. Registered trademarks are the property of their respective companies. D2003460 REV 001 Copyright © 2007 12/17/2007 Page 1 of 2 Model 73029 MMCX JACK STRAIGHT CRIMP, RG174, 316 Cable Types and Crimp Die Information Connector Model # Cable Groups 73029 RG174, 316 Crimp Die Cavity Size for Outer Ferrule .128 (3.3) . Cable Assembly Instructions USA: Sales: 800-490-2361 Technical Support: [email protected] Fax: 425-446-5844 Europe: 31-(0) 40 2675 150 International: 425-446-5500 Where to Buy: www.pomonaelectronics.com All dimensions are in inches. Tolerances (except noted): .xx = ±.02” (.51 mm), .xxx = ± .005” (.127 mm). All specifications are to the latest revisions. Specifications are subject to change without notice. Registered trademarks are the property of their respective companies. D2003460 REV 001 Copyright © 2007 12/17/2007 Page 2 of 2