400MHz TTL/CMOS Potato Chip PO49HSTL3807G 3.3V 1:10 Differential to TTL Translator Driver FEATURES: DESCRIPTION: . Operating frequency up to 400MHz with 2pf load . Operating frequency up to 300MHz with 5pf load . Operating frequency up to 250MHz with 15pf load . Operating frequency up to 120MHz with 50pf load . Very low output pin to pin skew < 350ps . Very low pulse skew < 100ps . VCC = 1.65V to 3.6V . Propagation delay < 2.7ns max with 15pf load . Low input capacitance: 3pf typical . 1:10 fanout . Available in 20pin 150mil wide QSOP package . Available in 20pin 300mil wide SOIC package Potato Semiconductor’s PO49HSTL3807G is designed for world top performance using submicron CMOS technology to achieve 400MHz TTL output frequency with less than 100ps output pulse skew. PO49HSTL3807G is a 1.65v to 3.6V 1 high speed comparator inputs to 10 TTL output buffered driver to achieve higher than 400MHz output frequency. Typical applications are HSTL, PECL, LVDS to TTL translator, crystal or ring oscillator, clock and signal distribution. Logic Block Diagram Pin Configuration Pin Description Pin Name Description IN+, IN- Inputs O1 to O10 Outputs 1 400MHz TTL/CMOS Potato Chip PO49HSTL3807G 3.3V 1:10 Differential to TTL Translator Driver Maximum Ratings Description Max Unit Storage Temperature -65 to 150 °C Operation Temperature -40 to 85 °C Operation Voltage -0.5 to +4.6 V Input Voltage -0.5 to Vcc+0.5 V Output Voltage -0.5 to Vcc+0.5 V Note: stresses greater than listed under Maximum Ratings may cause permanent damage to the device. This is a stress rating only and functional operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect reliability specification is not implied. DC Electrical Characteristics Symbol Description VOH Output High voltage VOL Test Conditions Min Typ Max Unit Vcc=3V Vin=VIH or VIL, IOH= -12mA 2.4 3 - V Output Low voltage Vcc=3V Vin=VIH or VIL, IOH=12mA - 0.3 0.5 V VIH Input High voltage Guaranteed Logic HIGH Level (Input Pin) 2 - Vcc V VIL Input Low voltage Guaranteed Logic LOW Level (Input Pin) -0.5 - 0.8 V IIH Input High current Vcc = 3.6V and Vin = 3.6V - - 1 uA IIL Input Low current Vcc = 3.6V and Vin = 0V - - -1 uA VIK Clamp diode voltage Vcc = Min. And IIN = -18mA - -0.7 -1.2 V Notes: 1. 2. 3. 4. 5. For conditions shown as Max. or Min., use appropriate value specified under Electrical Characteristics for the applicable device type. Typical values are at Vcc = 3.3V, 25 °C ambient. This parameter is guaranteed but not tested. Not more than one output should be shorted at one time. Duration of the test should not exceed one second. VoH = Vcc – 0.6V at rated current 2 400MHz TTL/CMOS Potato Chip PO49HSTL3807G 3.3V 1:10 Differential to TTL Translator Driver Power Supply Characteristics Symbol Description Test Conditions (1) Min Typ Max Unit IccQ Quiescent Power Supply Current Vcc=Max, Vin=Vcc or GND - 0.1 30 uA ∆Icc Power Supply Current per Input High Vcc=Max, Vin= Vcc-0.6V - 50 300 uA Notes: 1. 2. 3. 4. 5. For conditions shown as Max. or Min., use appropriate value specified under Electrical Characteristics for the applicable device type. Typical values are at Vcc = 3.3V, 25°C ambient. This parameter is guaranteed but not tested. Not more than one output should be shorted at one time. Duration of the test should not exceed one second. VoH = Vcc – 0.6V at rated current Capacitance Parameters (1) Description Test Conditions Typ Max Unit Cin Input Capacitance Vin = 0V 3 4 pF Cout Output Capacitance Vout = 0V - 6 pF Notes: 1 This parameter is determined by device characterization but not production tested. Switching Characteristics Symbol Description Test Conditions (1) Max Unit tPLH Propagation Delay A to Bn CL = 15pF 2.7 ns tPHL Propagation Delay A to Bn CL = 15pF 2.7 ns tr/tf Rise/Fall Time 0.8V – 2.0V 0.8 ns tsk(p) Pulse Skew (Same Package) CL = 15pF,V+ = 125MHz, V- = 1.5v 0.1 ns tsk(o) Output Pin to Pin Skew (Same Package) CL = 15pF,V+ = 125MHz, V- = 1.5v 0.35 ns Output Skew (Different Package) CL = 15pF,V+ = 125MHz, V- = 1.5v 0.4 ns tsk(pp) fmax Input Frequency CL = 50pF 120 MHz fmax Input Frequency CL =15pF 250 MHz fmax Input Frequency CL = 5pF 300 MHz fmax Input Frequency CL = 2pF 400 MHz Notes: 1. See test circuits and waveforms. 2. tpLH, tpHL, tsk(p), and tsk(o) are production tested. All other parameters guaranteed but not production tested. 3. Airflow of 1m/s is recommended for frequencies above 133MHz 3 400MHz TTL/CMOS Potato Chip PO49HSTL3807G 3.3V 1:10 Differential to TTL Translator Driver Test Waveforms Test Circuit 50Ω 50Ω 4 400MHz TTL/CMOS Potato Chip PO49HSTL3807G 3.3V 1:10 Differential to TTL Translator Driver Packaging Mechanical Drawing: 20 pin QSOP Packaging Mechanical Drawing: 20 pin SOIC 5