3 0 - 1 1 0 W AT T S S I N G L E & M U LT I P L E O U T P U T A C / D C G E N E R A L EXTERNAL PUP 30-110 Features • • • • • • • • Wide range of models Adjustable output voltage Single, dual, triple and quad output voltages Universal input Overcurrent protection Overvoltage protection UL, CSA, and CE approvals MEPS compliance Specifications OPERATING INPUT Input voltage 85–264Vac wide input Frequency 47Hz–63Hz Input current PUP30: 0.80A @ 115V, 0.5A @ 230V PUP55: 1.5A @ 115V, 0.9A @ 230V PUP110: 3.2A @ 115VAC, 1.8A @ 230VAC Isolation Inrush current Input – Output: 3000Vac Input – Ground: 1500Vac Output – Ground: 500Vac 15A @ 115V, 30A @ 230V OUTPUT MTBF 100,000 hrs @ 25°C Efficiency 65%–70% Insulation resistance 10M from Output to Ground PFD signal Power fail detection optional on PUP110 ENVIRONMENTAL Operating temperature 0°C to 50°C Derating Derate to 50% at 70°C Storage temperature -40°C to 85°C Relative humidity 5%–95% non-condensing Output voltage See table STANDARDS AND APPROVALS Output voltage adjustment V1 only – see table, ±10% on multi outputs Office of energy PUP30: N13637; PUP55: N13180 Output current See table Safety UL1950, CSA C22.2, EN60950 Output power PUP30 @ 30W PUP55 @ 55W PUP110 @ 110W C-Tick AS/NZS CISPR11 Group 1 Class A EMC standards EN61000-4-2, EN61000-4-3, -4, -5, -6, -8, -11 Ripple & noise 1% peak to peak EMI standards EN55022 level B, FCC level B, VCCI level B, EN61000-3-2, EN61000-3-3 Line regulation ±0.5% over input range Load regulation See table Transient response Max. deviation 4% recovering to 1% within 500µs after 25% load charge Overvoltage protection Provided on V1 only. Set at 110%–132% of nominal Overcurrent protection All outputs protected for short circuit conditions Temperature coefficient All outputs ±0.04% per °C Holdup time Typically 10mS at 110VAC MECHANICAL Input connector IEC320 socket Output connector Various combinations of cord and plug available. Consult our sales office Dimensions PUP30: 147x75x42mm PUP55: 178x95x57mm PUP110: 254x127x68mm Weight PUP30: 500g; PUP55: 700g; PUP110: 1.2kg *For detailed data sheet and output Pin connections and connector type, call our sales office Your dependable power partner – www.powerbox.com.au 263 EXTERNAL PUP 30-110 3 0 - 1 1 0 W AT T S S I N G L E & M U LT I P L E O U T P U T A C / D C G E N E R A L Selection Table MAX. MODEL NUMBER 264 OUTPUT #1 VNOM IMIN IMAX OUTPUT #2 OUTPUT #3 OUTPUT #4 OUTPUT TOL VNOM IMIN IMAX IPEAK TOL VNOM IMIN IMAX TOL VNOM IMIN IMAX TOL POWER PUP30-10 5–6V 0A 5.0A 5% 24W PUP30-10-1 6–8V 0A 4.5A 2% 27W PUP30-11 9–11V 0A 3.3A 2% 30W PUP30-12 11–13V 0A 2.7A 2% 30W PUP30-13 13–17V 0A 2.3A 2% 30W PUP30-13-1 17–21V 0A 1.7A 2% 30W PUP30-14 21–27V 0A 1.4A 2% 30W PUP30-16 27–33V 0A 1.1A 2% 30W PUP30-17 33–39V 0A 0.9A 2% 30W PUP30-18 48V 0A 0.7A 2% PUP30-23 +5V 0.3A 3.0A 5% +12V 0.1A 2.0A 5% 30W PUP30-24 +5V 0.3A 3.0A 5% +15V 0.1A 1.5A 5% 30W PUP30-25 +5V 0.3A 3.0A 5% +24V 0.1A 1.0A 5% PUP30-31 +5V 0.3A 3.0A 5% +12V 0A 0.8A 5% -12V 0A 0.8A 5% 30W PUP30-32 +5V 0.3A 3.0A 5% +15V 0A 0.8A 5% -15V 0A 0.8A 5% 30W PUP55-10 5–6V 0A 8A 5% 40W PUP55-10-1 6–8V 0A 7.5A 5% 45W PUP55-11 9–11V 0A 5A 5% 50W PUP55-12 11–13V 0A 4.6A 5% 55W PUP55-13 13–17V 0A 3.7A 3% 55W PUP55-13-1 17–21V 0A 3.1A 3% 55W PUP55-14 21–27V 0A 2.3A 3% 55W PUP55-16 27–33V 0A 1.9A 3% 55W PUP55-17 33–39V 0A 1.6A 3% 55W PUP55-18 48V 0A 1.2A 3% 55W PUP55-23 +5V 1A 5A 5% +12V 0.5A 3A 5% 55W PUP55-24 +5V 1A 5A 5% +15V 0.4A 2.5A 5% 55W PUP55-25 +5V 1A 5A 5% +24V 0.3A 2A 5% 55W PUP55-31 +5V 1A 5A 5% +12V 0.5A 3A 5% -12V 0.1A 0.5A 10% PUP55-32 +5V 1A 5A 5% +15V 0.4A 2.5A 5% -15V 0.1A 0.5A 10% PUP110-10 5V 0A 22A 5% 110W PUP110-12 12V 0A 9.0A 4% 110W PUP110-13 15V 0A 7.5A 3% 110W PUP110-14 24V 0A 4.5A 3% 110W PUP110-16 30V 0A 3.6A 3% 110W PUP110-18 48V 0A 2.3A 3% PUP110-23 +5V 0A 10A 5% +12V 0A 5A 9.0A 5% PUP110-31 +5V 0A 10A 5% +12V 0A 5A 9.0A 5% -12V 0A 1A 5% PUP110-32 +5V 0A 10A 5% +15V 0A 4A 7.5A 5% -15V 0A 1A 5% PUP110-40 +5V 0A 10A 5% +12V 0A 5A 9.0A 5% -12V 0A 1A 5% -5V 0A 1A 5% 110W PUP110-41 +5V 0A 10A 5% +15V 0A 4A 7.5A 5% -15V 0A 1A 5% +24V 0A 1A 5% 110W PUP110-42 +5V 0A 10A 5% +12V 0A 5A 9.0A 5% -12V 0A 1A 5% +12V 0A 1A 5% 110W PUP110-45 +5V 0A 10A 5% +12V 0A 5A 9.0A 5% -12V 0A 1A 5% +24V 0A 1A 5% 110W PUP110-45-1 +5V 2A 10A 5% +12V 0A 5A 9.0A 5% -12V 0A 1A 5% +24V 1.5A 3A 10% 110W PUP110-45-2 +5V 0A 10A 5% +24V 0A 3A 5.0A 5% -12V 0A 1A 5% +12V 0A 1A 5% 110W PUP110-46 +5V 0A 10A 5% +15V 0A 4A 7.5A 5% -15V 0A 1A 5% -5V 0A 1A 5% NOTES: (1) PUP110 units: peak output current with 10% maximum duty cycle for less than 60 seconds. Total peak power must not exceed 130 watts. (2) The output #1 of model PUP110-45-1 needs a minimum current of 2A to support the other outputs at their maximum rated loads. 110W 30W 30W 55W 55W 110W 110W 110W 110W 3 0 - 1 1 0 W AT T S S I N G L E & M U LT I P L E O U T P U T A C / D C G E N E R A L EXTERNAL PUP 30-110 Technical Illustrations PUP30 PUP55 PUP110 NOTE: DC output connector shown for multi output supplies All dimensions are shown in inches (mm). Your dependable power partner – www.powerbox.com.au 265