ECO-PACTM 1 Three Phase Rectifier Bridge PSD 86 IdAV VRRM = 86 A = 600-1600 V Preliminary Data Sheet VRSM VDSM (V) 700 900 1300 1500 1900 VRRM VDRM (V) 600 800 1200 1400 1600 + Type PSD PSD PSD PSD PSD ~H ~A ~N 86/06 86/08 86/12 86/14 86/16 Features Symbol Test Conditions I*dAV IFSM TC = 90 °C, (per module) ∫ i2 dt TVJ TVJM Tstg VISOL K - Maximum Ratings 86 A • • • • • Package with DCB ceramic base plate • UL registered, E 148688 Isolation voltage 3000 V∼ TVJ = 45 °C t = 10 ms (50 Hz), sine 530 A VR = 0 t = 8.3 ms (60 Hz), sine 570 A TVJ = TVJM t = 10 ms (50 Hz), sine 480 A VR = 0 t = 8.3 ms (60 Hz), sine 520 A TVJ = 45 °C t = 10 ms (50 Hz), sine 1400 A²s VR = 0 t = 8.3 ms (60 Hz), sine 1360 A²s TVJ = TVJM t = 10 ms (50 Hz), sine 1150 A²s Applications VR = 0 t = 8.3 ms (60 Hz), sine 1140 A²s -40... + 150 150 °C °C -40... + 125 °C 2500 V∼ • • • • 50/60 Hz, RMS t = 1 min IISOL ≤ 1 mA 3000 V∼ 1.5 - 1.8 14 - 16 16 Nm lb.in. g t=1s Md Mounting torque Weight typ. (M4) Low forward voltage drop Leads suitable for PC board soldering Supplies for DC power equipment Input rectifier for PWM inverter Battery DC power supplies Field supply for DC motors Advantages • • • Easy to mount with two screws Space and weight savings Improved temperature and power cycling capability High power density Symbol Test Conditions IR VR = VRRM, TVJ = TVJM ≤ 3 mA VR = VRRM, TVJ = 25°C ≤ 0.5 mA IF = 80 A, ≤ 1.50 A Package style and outline 0.8 V Dimensions in mm (1mm = 0.0394“) VF VTO rT RthJC RthJK ds dA a Characteristic Value Planar glass passivated chips TVJ = 25 °C For power-loss calculations only 7.5 mΩ 1.2 0.2 1.5 K/W K/W K/W per module 0.25 K/W Creeping distance on surface Creeping distance in air Max. allowable acceleration 11.2 9.7 50 mm mm m/s² per diode; DC per module per diode; DC • • Small and light weight Data according to IEC 60747 refer to a single diode unless otherwise stated *- for resistive load at bridge output POWERSEM GmbH, Walpersdorfer Str. 53 D - 91126 Schwabach Phone: 09122 - 9764 - 0 FAX: 09122 - 9764 - 20 2005 POWERSEM reserves the right to change limits, test conditions and dimensions