ECO-PACTM 2 HiPerFETTM Power MOSFET in ECO-PAC 2 PSMG 50/05* ID25 VDSS RDSon trr (Electrically Isolated Back Surface) Single MOSFET Die I K10 Preliminary Data Sheet X18 A1 = 43 A = 500 V Ω = 100 mΩ < 250 ns LN9 K13 K15 *NTC optional MOSFET Symbol Conditions VDSS TVJ = 25°C to 150°C Maximum Ratings VGS ID25 ID90 TC = 25°C TC = 90°C dv/dt VDS < VDSS; IF ≤ 50A;diF/dt≤ 100A/µs TVJ = 150°C EAS EAR ID = 10 A; L = 36 mH; TC = 25°C ID = 20 A; L = 5 µH; TC = 25°C 500 V ±20 V 43 tbd A A 5 V/ns 3 60 J mJ Symbol Conditions RDSon VGS = 10 V; ID = ID90 VGSth VDS = 20 V; ID = 8 mA; IDSS VDS = VDSS; VGS = 0 V; TVJ = 25°C TVJ = 125°C 100 µA 2 mA IGSS VGS = ±20 V; VDS = 0 V 100 Features • ECO-PAC 2 with DCB Base - Electrical isolation towards the heatsink - Low coupling capacitance to the heatsink for reduced EMI - High power dissipation - High temperature cycling capability of chip on DCB - solderable pins for DCB mounting • fast CoolMOS power MOSFET - 2nd generation - High blocking capability - Low on resistance - Avalanche rated for unclamped inductive switching (UIS) - Low thermal resistance due to reduced chip thickness Characteristic Values (TVJ = 25°C, unless otherwise specified) min. typ. max. Qg Qgs Qgd VGS= 10 V; VDS = 250 V; ID = 50 A td(on) tr td(off) tf VGS= 10 V; VDS = 380 V; ID = 25 A; RG = 1.8 Ω VF (reverse conduction) IF = 20 A; VGS = 0 V RthJC per MOSFET mΩ 100 2 4 V • Enhanced total power density • UL certified, E 148688 nA Applications 330 55 155 nC nC nC • Switched mode power supplies 45 60 120 45 ns ns ns ns • • • • (SMPS) Uninterruptible power supplies (UPS) Power factor correction (PFC) Welding Inductive heating V 0.3 K/W Caution: These Devices are sensitive to electrostatic discharge. Users should observe proper ESD handling precautions. 2005 POWERSEM reserves the right to change limits, test conditions and dimensions POWERSEM GmbH, Walpersdorfer Str. 53 D - 91126 Schwabach Phone: 09122 - 9764 - 0 FAX: 09122 - 9764 - 20 ECO-PACTM 2 Module Symbol Dimensions in mm (1 mm = 0.0394") Conditions Maximum Ratings TVJ Tstg -40...+150 -40...+125 °C °C 3600 V~ 1.5 - 2.0 14 - 18 50 Nm lb.in. m/s 2 VISOL IISOL ≤ 1 mA; 50/60 Hz; t = 1 s Md Mounting torque (M4) a Max. allowable acceleration Symbol Conditions Characteristic Values min. typ. max. dS dA Creepage distance on surface (Pin to heatsink) Strike distance in air (Pin to heatsink) 11.2 11.2 Weight mm mm 24 g 2005 POWERSEM reserves the right to change limits, test conditions and dimensions POWERSEM GmbH, Walpersdorfer Str. 53 D - 91126 Schwabach Phone: 09122 - 9764 - 0 FAX: 09122 - 9764 - 20 ECO-PACTM 2 Figure 1. Output Characteristics at 25OC Figure 2. Output Characteristics at 125OC 100 140 ID - Amperes 100 TJ = 125OC 80 ID - Amperes TJ = 120 VGS = 10V 9V 8V 7V 25OC 6V 80 60 40 5V 60 5V 40 0 0 4 8 12 16 20 24 0 4 8 12 RDS(on) normalized to 0.5 ID25 value vs. ID 2.4 RDS(ON) - Normalized RDS(ON) - Normalized 24 2.2 VGS = 10V TJ = 125OC 2.0 1.6 TJ = 25OC 1.2 0 20 40 60 80 100 2.0 VGS = 10V 1.8 ID = 55A 1.6 1.4 ID = 27.5A 1.2 1.0 25 120 50 ID - Amperes 125 150 100 50 IXF_55N50 80 ID - Amperes 40 IXF_50N50 30 20 TJ = 125oC 60 40 TJ = 25oC 20 10 -50 100 Figure 6. Admittance Curves 60 0 75 TJ - Degrees C Figure 5. Drain Current vs. Case Temperature ID - Amperes 20 Figure 4. RDS(on) normalized to 0.5 ID25 value vs. TJ 2.8 0.8 16 VDS - Volts VDS - Volts Figure 3. 6V 20 20 0 VGS = 10V 9V 8V 7V -25 0 25 50 75 TC - Degrees C 100 125 150 0 3.0 3.5 4.0 4.5 5.0 5.5 6.0 VGS - Volts 2005 POWERSEM reserves the right to change limits, test conditions and dimensions POWERSEM GmbH, Walpersdorfer Str. 53 D - 91126 Schwabach Phone: 09122 - 9764 - 0 FAX: 09122 - 9764 - 20 ECO-PACTM 2 Figure 7. Gate Charge Figure 8. Capacitance Curves 12 10000 Ciss VDS = 250V ID = 27.5A Capacitance - pF VGS - Volts 10 8 6 4 Coss 1000 Crss 2 0 0 50 100 150 200 250 300 100 350 0 5 10 15 Gate Charge - nC Figure 9. f = 1MHz 20 25 30 35 40 VDS - Volts Forward Voltage Drop of the Intrinsic Diode 100 220 100 ID - Amperes ID - Amperes 80 60 40 TJ = 125OC 0.1ms 10 1 ms 10ms 100ms O TC = 25 C 1 DC 20 TJ = 25OC 0 0.2 0.4 0.6 VSD - Volts 0.8 1.0 0.1 10 100 500 VDS - Volts 2005 POWERSEM reserves the right to change limits, test conditions and dimensions POWERSEM GmbH, Walpersdorfer Str. 53 D - 91126 Schwabach Phone: 09122 - 9764 - 0 FAX: 09122 - 9764 - 20