ECO-TOPTM 1 Three Phase PSUT 230 PSUH 230 AC Controller Modules IRMS = 3 x 200 A VRRM= 800-1800 V Preliminary Data Sheet VRSM VDSM (V) 900 1300 1500 1700 1900 D1 E1 F1 PSUH 230/08 PSUH 230/12 PSUH 230/14 PSUH 230/16 PSUH 230/18 L1 M1 N1 Test Conditions IRMS ITRMS ITAVM ITSM TC = 85 °C; 50-400 Hz (per phase) (di/dt)cr G15 N15 H1 P1 B15 C15 D15 Q15 R15 S15 I15 J15 K15 G15 S1 T1 U1 V15 N15 B15 C15 D15 I15 J15 K15 Q15 R15 S15 TC = 85 °C; Maximum Ratings 200 A 144 A 90 A 180° sine TVJ = 45 °C t = 10 ms (50 Hz), sine 2250 A VR = 0 t = 8.3 ms (60 Hz), sine 2400 A TVJ = 125 °C t = 10 ms (50 Hz), sine 2000 A VR = 0 t = 8.3 ms (60 Hz), sine 2150 A TVJ = 45 °C t = 10 ms (50 Hz), sine 25300 A²s VR = 0 t = 8.3 ms (60 Hz), sine 23900 A²s TVJ = 125 °C t = 10 ms (50 Hz), sine 20000 A²s VR = 0 19100 A²s 150 A/µs 500 A/µs 1000 V/µs TVJ = 125 °C tP=30µs ≤ 10 W IT =ITAVM ≤ 5 W 0.5 W t = 8.3 ms (60 Hz), sine TVJ = 125 °C repetitive, IT = 250 A f=50Hz, tP=200µs IG=0.45 A non repetitive,IT = ITAVM diG/dt=0.45A/µs (dv/dt)cr TVJ = 125 °C VD=2/3VDRM RGK= ∞, method 1 (linear voltage rise) PGAVM VRGM TVJ TVJM Tstg VISOL V15 L1 M1 N1 A1 VD=2/3VDRM PGM D1 E1 F1 S1 T1 U1 t e e h r s e a t d a n d u l e l t i v t i n t s e a t t m c n p te odu elo pr dev Symbol ∫ i2 dt W3H W3C VRRM Type VDRM (V) 800 PSUT 230/08 1200 PSUT 230/12 1400 PSUT 230/14 1600 PSUT 230/16 1800 PSUT 230/18 tP=300µs 50/60 Hz, RMS t = 1 min IISOL ≤ 1 mA Md Mounting torque Weight typ. t=1s 10 V -40... + 125 125 °C °C -40... + 125 °C 2500 V∼ 3000 V∼ 3 26 86 Nm lb. in. g (M5) typical picture, for pin configuration see outline drawing Features • • • • • • Thyristor controller for AC (circuit W3C acc. to IEC) for mains frequency Isolation voltage 3000 V∼ Planar glass passivated chips Low forward voltage drop Leads suitable for PC board soldering UL Release applied Applications • • • • Switching and control of three phase AC circuits Light and temperature control Softstart AC motor controller Solid state switches Advantages • • • • • Easy to mount with four screws Space and weight savings Improved temperature and power cycling capability High power density Small and light weight Data according to IEC 60747 refer to a single thyristor unless otherwise stated 2005 POWERSEM reserves the right to change limits, test conditions and dimensions POWERSEM GmbH, Walpersdorfer Str. 53 D - 91126 Schwabach Phone: 09122 - 9764 - 0 FAX: 09122 - 9764 - 20 ECO-TOPTM 1 Symbol Test Conditions ID,IR VT VTO rT VGT TVJ = 125°C, VR = VRRM, VD=VDRM ≤ IT = 300 A, ≤ VD=6V TVJ= 25°C TVJ=-40°C ≤ 1.6 V IGT VD=6V TVJ= 25°C ≤ 150 mA TVJ=-40°C ≤ 200 mA TVJ= 125°C VD=2/3VDRM ≤ 0.2 V TVJ= 125°C VD=2/3VDRM ≤ 10 mA ≤ 450 mA TVJ= 25°C, VD=6V, RGK= ∞ ≤ 200 mA TVJ= 25°C, VD=1/2VDRM ≤ 2 µs VGD IGD IL Characteristic Value TVJ = 25 °C For power-loss calculations only ≤ 5 mA 1.5 V 0.85 V 2.5 mΩ 1.5 V t e e h s r e a t d a un d l e l t i v t i n t s e a t t m c n te odu elop r p dev TVJ= 25°C, tP=10µs IG=0.45A, diG/dt=0.45A/µs IH tgd IG=0.45A, diG/dt=0.45A/µs RthJC RthJK per thyristor; DC per module per thyristor; sine 180° el per module dS dA a Creepage distance on surface (Pin to heatsink) Strike distance in air (Pin to heatsink) Max. allowable acceleration 0.3 0.05 0.49 K/W K/W K/W 0.082 K/W mm mm min. 11.2 min. 11.2 50 m/s² Package style and outline Dimensions in mm (1mm = 0.0394“) W3C W3H 2005 POWERSEM reserves the right to change limits, test conditions and dimensions POWERSEM GmbH, Walpersdorfer Str. 53 D - 91126 Schwabach Phone: 09122 - 9764 - 0 FAX: 09122 - 9764 - 20