LED-CONVERTER UNIT PS-LPL0801-01(S) (9 W) (PRELIMINARY INFORMATION) DESCRIPTION : This low profile LED-Converter is developed for max. 8 LED-lines APPLICABLE: 1~8 LED lines (Serial Mode) Pout max. 1,125 Watt per line, total max. 9 Watt LED Voltage max. 40V Lamp Current 15 to 240mA programmable FEATURES : Ext. PWM Dimming 1000:1 dimming ratio with external PWM Remote ON / OFF Programmable LED current RoHS compliant (S) TEMPERATURE & HUMIDITY : Operating Temperature Range Storage Temperature Range Humidity DIMENSIONS : LxWxH -10°C ~ +60°C -20°C ~ +85°C 95 %RH max 64 x 32 x 9 mm Weight :8 (g) typ. Components No. 1 2 Part Description PCB Connector CN1 Qty. 1 1 Material UL94V-0 (FR-4 or CEM-3) 53261-1090 Note t=1.0mm Molex 3 Connector CN2 1 53261-1090 Molex Power Systems – The Power Solution Web: Email: www.Power-Systems.de [email protected] All specifications are subject to change without notice. Address: Hauptstr. 48 ; 74360 Ilsfeld-Auenstein / Germany Tel. : + 49 / 70 62 / 67 59 - 6 Fax: + 49 / 70 62 / 67 59 - 800 Page (1) Version 1.0.1, 22nd March 2010 LED-CONVERTER UNIT PS-LPL0801-01(S) (9 W) (PRELIMINARY INFORMATION) Input side CN1 Output side CN2: Pin No. Symbols Ratings Vin 10.8 ~ 13.2 Vdc CN 1-1 Vin 10.8 ~ 13.2 Vdc CN 1-2 Vrmt 0 ~ 0.8 = OFF / 2.5 ~ 5.5 = ON CN 1-3 CN 1-4 Ext. PWM 0 ~ 0.5 = LOW / 2.5 ~ 5 = HIGH (activ) Adj 1 CN 1-5 Adj 2 CN 1-6 Adj 3 CN 1-7 Adj 4 CN 1-8 CN 1-9 GND CN 1-10 GND Pin No. CN2-1 CN2-2 CN2-3 CN2-4 CN2-5 CN2-6 CN2-7 CN2-8 CN2-9 - Symbols RTN1(-) RTN2 (-) RTN3 (-) RTN4 (-) RTN5 (-) RTN6 (-) Ratings LED LINE 1 RETURN LED LINE 2 RETURN LED LINE 3 RETURN LED LINE 4 RETURN LED LINE 5 RETURN LED LINE 6 RETURN RTN7 (-) RTN8 (-) LED LINE 7 RETURN LED LINE 8 RETURN max. 40 Vdc Vhigh (+) CN2-10 Vhigh (+) max. 40 Vdc CURRENT SELECTION: Output Current Select Control Connection Adj 1 GND GND GND X X Adj 2 15mA (Output Current Min.) + 1mA (Adj1 to GND) = 16mA +1 mA 15mA (Output Current Min.) + 8mA (Adj4 to GND) = 23mA +2 mA Adj1 ~ Adj4 OPEN = 15mA +4 mA X Adj 3 Example: Output Current GND X Adj 4 +8 mA ELECTRICAL CHARACTERISTICS : Conditions Parameters Symbols Output Current Output Current Input Current Open Load Shutdown PWM Frequency Output Power Output Power Iout Imin Iin Vbias f(PWM) Pout Pout Specification Vin (V) Tu (°C) Min. Typ. Max. 10.8 ~ 13.2 10.8 ~ 13.2 10.8 ~ 13.2 10.8 ~ 13.2 10.8 ~ 13.2 10.8 ~ 13.2 10.8 ~ 13.2 -10~+60 -10~+60 -10~+60 -10~+60 -10~+60 -10~+60 -10~+60 13 0.4 150 TBD TBD 15 1 9 1.125 17 1.8 42 300 TBD TBD Unit Note mAdc % Adc Vdc Hz Watt Watt Duty 100%, max current duty cycle Note 4 Tu: -10~+60degC For one line Power Systems – The Power Solution Web: Email: www.Power-Systems.de [email protected] All specifications are subject to change without notice. Address: Hauptstr. 48 ; 74360 Ilsfeld-Auenstein / Germany Tel. : + 49 / 70 62 / 67 59 - 6 Fax: + 49 / 70 62 / 67 59 - 800 Page (2) Version 1.0.1, 22nd March 2010 LED-CONVERTER UNIT PS-LPL0801-01(S) (9 W) (PRELIMINARY INFORMATION) TEST CIRCUITS : Iin A Vin 9.6 ~ 14.4 Vdc CN1-1 V CN1-2 V D1 D1 D2 D2 D6 D6 CN2-9 a Vrmt 1.5 / 2.5 Vdc CN2-10 b SW1 CN1-3 CN1-4 Ext. PWM 0. 0 ~ 5.0 CN1-5 CN1-6 CN 2-8 A ~ CN 2-1 A ~ CN1-7 CN1-8 CN1-9 CN1-10 30~60mA for each line by 4 LED Raid 15~30mA for each line by 8 LED Raid 60~120mA for each line by 2 LED Raid Note 1 : Note 2 : Note 3 : Note 4 : 120~240mA for each line by 1 LED Raid External PWM Signal 2.5~5V (max. 6V) Above output current is the default value. Correct output current is to be selected by user and under his responsibility. Exceeding currents will damage the LED backlight. External PWM-signal is LOW active. For other external PWM frequency, please ask factory. CABLES : for input: 500 mm, stripped and tinned ends, order key <input cable #6> for output: 500 mm, stripped and tinned ends, order key <input cable #6> Power Systems – The Power Solution Web: Email: www.Power-Systems.de [email protected] All specifications are subject to change without notice. Address: Hauptstr. 48 ; 74360 Ilsfeld-Auenstein / Germany Tel. : + 49 / 70 62 / 67 59 - 6 Fax: + 49 / 70 62 / 67 59 - 800 Page (3) Version 1.0.1, 22nd March 2010