P-tec Corp. Tel:(800)688-0613 2405 Commerce Circle Tel:(719) 589 3122 Alamosa Co. 81101 Fax:(719) 589 3592 www.p-tec.net [email protected] PC0801C-O Series (8x1) Character Display Absolute Maximum Ratings at TA = 25°C Features *8 Character, 1 Line *View Angle 12H or 6H *STN Fluid Yellow, Gray or Blue *Extended Temperature Range available *LED Backlight available *RoHS Compliant Item Symbol Min Max Unit Power Supply (Logic) Vdd -0.3 7.0 V Power Supply (LCD) Vlcd (Vdd-Vo) -13.5 0.3 V Vi -0.3 Vdd+0.3 V Operating Temperature (Standard) Topr 0 50 °C Storage Temperature (Standard) Tstg -10 60 °C Extended Operating Temperature Topr -20 70 °C Extended Storage Temperature Tstg -30 80 °C Input Voltage Electrical Characteristics at TA = 25°C, Vdd=5V+0.25V Item Symbol Min Typ Max Unit Vdd-Vss 4.5 5.0 5.5 V Idd 0.5 1.0 2.0 mA LCD Driving Voltage Vdd -Vo 4.4 5.0 5.4 V LCD Driving Current llcd 0.2 0.3 0.4 mA Power Supply (Logic) Supply Current Interface Pin Connection No Symbol Function No Symbol Function 1 Vss Power Supply (GND) 9 DB2 Data Bus Line 2 2 Vdd Power Supply (+5V) 10 DB3 Data Bus Line 3 3 Vo Contrast Adjust 11 DB4 Data Bus Line 4 4 RS Instruction/Register Select 12 DB5 Data Bus Line 5 5 R/W Read/Write 13 DB6 Data Bus Line 6 6 E Enable Signal 14 DB7 Data Bus Line 7 7 DB0 Data Bus Line 0 15 A Power Supply for LED Backlight (+) 8 DB1 Data Bus Line 1 16 K Power Supply for LED Backlight (-) LED Backlight Specifications Forward Voltage Forward Current Power Dissipation Peak Wavelength 4.1V (Typ) 150mA (Max) 410mW (Max) 570nm (Typ) Mechanical Specifications Item Overall Size Viewing Area Character Size Character Pitch Dot Size Specifications 80.0W x 36.0H x 10.T (BL13.0T) 61.0W x 15.8H 6.45W x 10.75H 7.15 1.25W x 1.30H All dimensions are in mm. Tolerance is ± 0.3 Unless otherwise specified 04.18.07 Rev0 P-tec Corp. Tel:(800)688-0613 2405 Commerce Circle Tel:(719) 589 3122 Alamosa Co. 81101 Fax:(719) 589 3592 www.p-tec.net [email protected] PC0801C-O Series (8x1) Character Display 80.0± 0.5 No B/L 5.0 75.0 29.4 2.0 16-Ø 1.0 31.0 27.0 LED B/L 8.0 2.5 10.75 15.8 56.5 2.5 61.0 1.6± 0.1 1.6± 0.1 75.0 LCD Block Diagram Vdd VO Vss E R/W RS LCD Controller S6A0069 Dot Layout 7.15 6.45 Seg40 COM 8 LCD Panel 1.30 10.75 0.05 DBO | DB7 A 0.05 1.25 LED Backlight K All dimensions are in mm. Tolerance is ± 0.3 Unless otherwise specified 04.18.07 Rev0