AND113G/GP Standard LED Standard Bright LED LAMPS Weight: 0:30 g Unit: mm Product specifications contained herein may be changed without prior notice. It is therefore advisable to contact Purdy Electronics before proceeding with the design of equipment incorporating this product. ø5.8 ± 0.2 AND113G 12.75 ±0.5 AND113G/GP Standard LED T-1 3/4 Package (5 mm) (1) 7.6 2.5 max including resin ø5.0 ± 0.2 Cathode Index Features 21.1 0.5 • RoHS Compliant 1.5 • Low power requirement • Flush-mount • All plastic molded lens • Color: GaP–Green 2.54 0.5 Cathode Index 2 1. Anode 2. Cathode Optical Characteristics (Ta = 25°C) AND113GP ø5.8 ± 0.2 1 Color Lens Green Green Min. Typ. 20 50 10 Clear Viewing Angle 2θ1/2 (deg) 30 7.6 LED Test Condition (IF–mA) Absolute Maximum Ratings (Ta = 25°C) (1) 1.5 0.5 Symbol Rating (Yellow) Unit Forward Current (DC) IF 25 mA Reverse Voltage VR 5 V Power Dissipation PD 105 mW Operating Temperature TOpr -40 to +85 °C Storage Temperature Range TStg -40 to +85 °C Characteristics 26.5 2.5 max including resin ø5.0 ± 0.2 Axial Luminous Intensity (mcd) Lens Desc. 2.54 0.5 Cathode Index 1 2 1. Anode 2. Cathode Electro-Optical Characteristics (Ta = 25°C) Yellow Symbol Characteristics Test Condition Unit Min. Typ. Max. 2.1 2.5 Forward Voltage VF IF = 20mA – Reverse Current IR VR = 5 V – – 10 µA Peak Emission Wavelength λp IF = 15mA – 565 – nm Spectral Line Half Width λ IF = 15mA – 30 – nm V Precaution Please be careful of the following: 1. Soldering temperature: 260°C max; Soldering time: 5 sec. max; Soldering portion of lead: up to 1.6 mm from the body of the device. 2. The lead can be formed up to 5 mm from the body of the device without forming stress. Soldering should be performed after the lead forming. 7/18/07 Purdy Electronics Corporation • 720 Palomar Avenue • Sunnyvale, CA 94085 Tel: 408.523.8200 • Fax: 408.733.1287 • [email protected] www.purdyelectronics.com 1 AND113G/GP Standard LED Standard Bright LED LAMPS IF vs. VF 50 Radiation Pattern TA = 25°C Forward Current IF (mA) 30 20 20° 0° 10° 10° 20° 30° 30° 10 40° 40° 50° 50° 5 60° 60° 3 70° 70° 2 80° 80° 90° 1.0 1 1.7 1.8 1.9 2.0 2.1 Forward Voltage VF (V) 2.2 0.8 0.6 0.4 0.2 0 0.2 0.4 0.6 0.8 90° 1.0 2.3 IV vs. IF Relative Luminous Intensity – Wavelength 5 2 Relative Luminous Intensity Relative Luminous Intensity IV 1.0 1 0.5 0.2 0.1 1 2 5 10 20 0.8 0.6 0.4 0.2 50 0 560 540 Forward Current IF (mA) This graph shows relative luminous vs. forward current. At three points (IF = 10, 15, 20mA) each relation is normalized.) IV vs. TC Allowable Forward Current IF (mA) Relative Luminous Intensity IV 2 600 620 640 IV vs.TA 3 2 1 0.5 0.4 0.3 -20 580 Wavelength λ (nm) 0 20 40 60 Case Temperature TC (°C) 80 40 30 20 10 0 0 20 40 60 Purdy Electronics Corporation • 720 Palomar Avenue • Sunnyvale, CA 94085 Tel: 408.523.8200 • Fax: 408.733.1287 • [email protected] www.purdyelectronics.com 80 100 Ambient Temperature TA (°C) 7/18/07