AND113R/RP Standard LED Standard Bright LED LAMPS Weight: 0:30 g Unit: mm ø5.8 ± 0.2 AND113R Standard LED T-1 3/4 Package (5 mm) 12.75 ±0.5 Features (1) 7.6 2.5 max including resin ø5.0 ± 0.2 • RoHS Compliant • Low power requirement • Flush-mount • All plastic molded lens • Color: GaP–Red Cathode Index 1.5 21.1 0.5 AND113R/RP 2.54 Optical Characteristics (Ta = 25°C) 0.5 Cathode Index 2 1. Anode 2. Cathode Color 7.6 LED Lens Red Red Typ. 5 18 10 Clear Viewing Angle 2θ1/2 (deg) 30 Symbol Rating (Yellow) Unit Forward Current (DC) IF 25 mA Reverse Voltage VR 5 V 26.5 Characteristics 1.5 0.5 Min. Test Condition (IF–mA) Absolute Maximum Ratings (Ta = 25°C) (1) 2.5 max including resin ø5.0 ± 0.2 Axial Luminous Intensity (mcd) Lens Desc. AND113RP ø5.8 ± 0.2 1 PD 120 mW Operating Temperature TOpr -40 to +85 °C Storage Temperature Range TStg -40 to +85 °C Power Dissipation 2.54 0.5 Cathode Index 1 2 1. Anode 2. Cathode Electro-Optical Characteristics (Ta = 25°C) Yellow Characteristics Symbol Test Condition Unit Min. Typ. Max. Forward Voltage VF IF = 20mA – 2.0 2.5 V Reverse Current IR VR = 5 V – – 10 µA Peak Emission Wavelength λp IF = 15mA – 700 – nm Spectral Line Half Width λ IF = 15mA – 45 – nm Precaution Please be careful of the following: 1. Soldering temperature: 260°C max; Soldering time: 5 sec. max; Soldering portion of lead: up to 1.6 mm from the body of the device. 2. The lead can be formed up to 5 mm from the body of the device without forming stress. Soldering should be performed after the lead forming. Product specifications contained herein may be changed without prior notice. It is therefore advisable to contact Purdy Electronics before proceeding with the design of equipment incorporating this product. 6/14/07 Purdy Electronics Corporation • 720 Palomar Avenue • Sunnyvale, CA 94085 Tel: 408.523.8200 • Fax: 408.733.1287 • [email protected] www.purdyelectronics.com 1 AND113R/RP Standard LED Standard Bright LED LAMPS IF vs. VF 50 Radiation Pattern TA = 25°C Forward Current IF (mA) 30 20 20° 10° 0° 10° 20° 30° 30° 10 40° 40° 50° 50° 5 60° 60° 3 70° 70° 2 80° 80° 1 1.7 1.8 1.9 2.0 2.1 Forward Voltage VF (V) 2.2 2.3 90° 1.0 0.8 IV vs. IF 0.6 0.4 0.2 0 0.2 0.4 0.6 0.8 90° 1.0 Relative Luminous Intensity – Wavelength 5 2 Relative Luminous Intensity Relative Luminous Intensity IV 1.0 1 0.5 0.2 0.1 1 20 2 5 10 Forward Current IF (mA) 0.8 0.6 0.4 0.2 0 640 50 660 IV vs. TC Allowable Forward Current IF (mA) Relative Luminous Intensity IV 2 700 720 740 760 IV vs.TA 3 2 1 0.5 0.4 0.3 -20 680 Wavelength λ (nm) This graph shows relative luminous vs. forward current. At three points (IF = 10, 15, 20mA) each relation is normalized.) 0 20 40 60 Case Temperature TC (°C) 80 40 30 20 10 0 0 20 40 60 Purdy Electronics Corporation • 720 Palomar Avenue • Sunnyvale, CA 94085 Tel: 408.523.8200 • Fax: 408.733.1287 • [email protected] www.purdyelectronics.com 80 100 Ambient Temperature TA (°C) 6/14/07