AND134CRP Ultra Bright LED Lamps: Type 1 Weight: 0.31g Unit: mm AND134CRP 5.9 5.9 GaAlAs Red Light Emission T-1 3/4 Package (5 mm) 5.0 5.0 Features 1.5 1.5TYP TYP 24.0 24.0MIN. MIN. 1.0 1.0 8.7 8.7 • Peak wavelength (λp = 660 nm) high bright emission • All plastic mold type, red diffused lens • Low drive current:20 mA for outdoor applications 0.5 mA for indoor applications • Fast response time, capable of pulse operation • RoHS Compliant 2.54 2.54 1 1 Cathode Index Cathode Index 2 2 0.5 0.5 0.5 0.5 Maximum Ratings (Ta = 25°C) Characteristics Symbol Rating Unit Forward Current IF 30 mA Reverse Voltage VR 4 V Power Dissipation PD 100 mW Operating Temperature Range TOpr -25 to 85 °C Storage Temperature Range TStg -25 to 100 °C 1. Anode 1. Anode 2. Cathode 2. Cathode Electro-Optical Characteristics (Ta = 25°C) Characteristics Symbol Test Condition Minimum Typical Maximum Unit Forward Voltage VF IF = 20 mA – 1.9 2.5 V Reverse Current IR VR = 4 V – – 100 µA Luminous Intensity IV IF = 20 mA 360 600 – mcd Peak Emission Wavelength lP IF = 20 mA – 660 – nm Spectral Line Half Width ∆λ IF = 20 mA – 25 – nm Dominant Wavelength λd IF = 20 mA – 640 – nm Full Viewing Angle θ IV = 1/2 Peak – 40 – degree Precaution Please be careful of the following: 1. Soldering temperature: 260°C max Soldering time: 5 sec. max Soldering portion of lead: up to 1.6 mm from the body of the device The lead can be formed up to 5 mm from the body of the device without forming stress. Soldering should be performed after the lead forming. Product specifications contained herein may be changed without prior notice. It is therefore advisable to contact Purdy Electronics before proceeding with the design of equipment incorporating this product. Purdy Electronics Corporation • 720 Palomar Avenue • Sunnyvale, CA 94085 Tel: 408.523.8200 • Fax: 408.733.1287 • [email protected] • www.purdyelectronics.com 6/12/07 AND134CRP GaAlAs Red Light Emission Ultra Bright LED Lamps: Type 1 IF – VF IV – VF 5 Ta = 25°C 30 Relative Luminous Intensity IV Forward Current IF (mA) 50 10 5 3 2 1 0.5 0.2 0.1 1 1.5 1.6 1.7 1.8 1.9 2.0 2.1 1 2 Forward Voltage VF (V) 5 10 20 50 Forward Current IF (mA) IV – TC Relative Luminous Intensity – Wavelength 3 1.0 Relative Luminous Intensity Relative Luminous Intensity IF = 20 mA 1 0.5 0.3 0.1 -20 0 20 40 6.0 Ta = 25°C 0.8 0.6 0.4 0.2 0 600 80 620 640 660 680 700 720 Wavelength λ (nm) Case Temperature TC (°C) Radiation Pattern IF – Ta 20° 10° 0° 10° Ta = 25°C 20° 30° 30° 40° 40° 50° 50° 60° 60° 70° 70° 80° 80° Allowable Forward Current IF (mA) 40 30 20 10 90° 90° 0 0.2 0.4 0.6 0.8 0 0 20 40 60 80 Ambient Temperature Ta (°C) Purdy Electronics Corporation • 720 Palomar Avenue • Sunnyvale, CA 94085 Tel: 408.523.8200 • Fax: 408.733.1287 • [email protected] • www.purdyelectronics.com 100 6/12/07