OPTOELECTRONICS LED Displays Unit: mm Product specifications contained herein may be changed without prior notice. It is therefore advisable to contact Purdy Electronics before proceeding with the design of equipment incorporating this product. 8° 12.4 21.8 AND-1510 Series Pin 6 A GaAsP/GaP–Red 7 Segment, 1.5 Inch B 40.64 4.0 38.12 46.8 F G E C D 4.6 Dia. 33.0 Pin 1 Features 0.5 Dia. DP • 1.5 inch character height • Available in red • Suitable for numerical readout for instrument and industrial products • Industry pin-for-pin compatibility • Available in both common cathode and common anode • RoHS Compliant 3.5 Min. Pin 5 2.54 x 4 = 10.16 Description Size Common Color Number of Digits Cathode Anode Display Face Number of Pins 1 AND-1510SCL AND-1510SAL Red Red 10 1.5 inch Absolute Maximum Ratings (T = 25°C) Characteristics DC Forward Current/Segment Pulse Forward Current/Segment Symbol Rating Unit IF(DC)/SEG 30 mA IFP/SEG 100 mA VR 3 V Operating Temperature Range TOpr -25 to 85 °C Storage Temperature Range TStg -25 to 100 °C Reverse Voltage/Segment Electro-Optical Characteristics (T = 25°C) Characteristics Symbol Test Condition Minimum Typical Maximum Unit Forward Voltage/Segment VF IF = 10 mA – 4.2 6.0 V Forward Voltage/D.P. VF IF = 10 mA – 2.1 3.0 V Reverse Current IR VR = 3 V – – 100 µA Luminous Intensity Per Segment Red IV IF = 10 mA 1.8 4.6 – mcd Peak Emission Wavelength Red λP IF = 10 mA – 635 – nm Spectral Line Half Width Red ∆λ IF = 10 mA – 40 – nm Precaution Please be careful of the following: 1. Soldering temperature: 260°C max; Soldering time: 3 sec. max; Soldering portion of lead: up to 2 mm from the body of the device. 2. The lead can be formed up to 5 mm from the body of the device without forming stress. Soldering should be performed after the lead forming. Purdy Electronics Corporation • 720 Palomar Avenue • Sunnyvale, CA 94085 Tel: 408.523.8200 • Fax: 408.733.1287 • [email protected] • www.purdyelectronics.com 7/18/07 AND-1510 Series GaAsP/GaP–Red LED Displays Forward Current IF/Seg (mA) 50 40 30 IV/Seg vs. IF/Seg Luminous Intensity IV/Seg (mcd) IF/Seg vs. VF TA = 25°C 20 10 5 4 3 2 1 1.6 TA = 25°C 10 5.0 3.0 2.0 1.0 0.5 1.8 2.0 2.2 2.4 Ambient Temperature TA (°C) 2.6 1 2 3 4 5 7 10 Forward Current IF/Seg (mA) 36 3 Relative Luminous Intensity IV Maximum Forward Current IFMAX/Seg (mA) 30 IV vs. TC IFMAX/Seg vs. TA 30 Direct Current 24 18 12 6 0 20 0 20 40 60 80 Ambient Temperature TA (°C) 100 2 1 0.5 0.4 0.3 -20 0 20 40 60 80 Case Temperature TC (°C) 100 AND-1510 Series Pin Connection Table AND-1510SCL Pin Connection Pin AND-1510SAL Connection Pin Connection Pin Connection 1 Common Cathode 6 B Anode 1 Common Anode 6 B Cathode 2 E Anode 7 A Anode 2 E Cathode 7 A Cathode 3 D Anode 8 Dp Anode 3 D Cathode 8 Dp Cathode 4 C Anode 9 F Anode 4 C Cathode 9 F Cathode 5 Common Cathode 10 G Anode 5 Common Anode 10 G Cathode Purdy Electronics Corporation • 720 Palomar Avenue • Sunnyvale, CA 94085 Tel: 408.523.8200 • Fax: 408.733.1287 • [email protected] • www.purdyelectronics.com 7/18/07