AND412HG Ultra Bright LED Lamps: Type 3 Weight: 0.31g Unit: mm AND412HG 5.9±0.3 InGaN High Intensity Blue Green Light Emission • RoHS Compliant • 5 mm (T1-3/4) Package • Available on tape and reel • Peak wavelength (lp = 505nm) high bright emission • All plastic mold type, clear colorless lens • Low drive current: 1 to 20 mA DC • Excellent On-Off contrast ratio • Fast response time, capable of pulse operation • High power intensity – suitable for indoor/outdoor applications • High reliability 1.0±0.2 8.6±0.3 5.0±0.2 0.5 Maximum Ratings (Ta = 25°C) 25.4 MIN. 1.0 MIN. 1.5 MAX. 0.65 MAX. 2.54 Characteristics Symbol Rating Unit Forward Current IF 30 mA Reverse Voltage VR 5 V Power Dissipation PD 120 mW Operating Temperature Range TOpr -40 to 85 C Storage Temperature Range TSig -40 to 100 C Electro-Optical Characteristics (Ta = 25°C) Characteristics Symbol Test Condition Minimum Typical Maximum Unit Forward Voltage VF IF = 20 mA – 3.5 4.0 V Reverse Current IR VR = 5V – – 10 µA Luminous Intensity IV IF = 20 mA 1250.0 2200.0 – mcd Peak Emission Wavelength lP IF = 20 mA – 505 – nm Spectral Line Half Width ∆l IF = 20 mA – 40 – nm Dominant Wavelength ld IF = 20 mA 500 – 510 nm 2 q 1/2 IV = 1/2 Peak – 12 – degree Full Viewing Angle Precaution Please be careful of the following: 1. Soldering temperature: 260 C max. Soldering time: 5 sec. max. Soldering portion of lead: up to 1.6 mm from the body of the device 2. The lead can be formed up to 5 mm from the body of the device without forming stress. Soldering should be performed after the lead forming. 3. Absolute secure counter measures against static electricity and surge should be taken when handling these products. It is recommended to use wrist band or antistatic gloves when handling these LEDs. Product specifications contained herein may be changed without prior notice. It is therefore advisable to contact Purdy Electronics before proceeding with the design of equipment incorporating this product. Purdy Electronics Corporation • 720 Palomar Avenue • Sunnyvale, CA 94085 Tel: 408.523.8200 • Fax: 408.733.1287 • [email protected] • www.purdyelectronics.com 7/18/07 AND412HG InGaN High Intensity Blue Green Light Emission Ultra Bright LED Lamps: Type 3 IF – VF IV – VF Ta = 25°C Ta = 25°C 40 Luminous Intensity IV (mcd) Forward Current IF (mA) 50 30 20 10 10000 1000 500 .01 3.0 3.2 3.4 3.6 3.8 4.0 4.2 1 Forward Voltage VF (V) 3 5 10 30 50 Relative Luminous Intensity – Wavelength IF = 20 mA Ta = 25°C Relative Luminous Intensity Relative Luminous Intensity 200 100 50 20 10 0 300 500 Forward Current IF (mA) IV – TC -20 100 60 40 20 100 75 50 25 0 80 350 400 450 500 550 600 Wavelength λ (nm) Case Temperature TC (°C) Radiation Pattern IF – Ta 20° 10° 0° 10° Ta = 25°C 20° 30° 30° 40° 40° 50° 50° 60° 60° 70° 70° 80° 80° Allowable Forward Current IF (mA) 40 30 20 20 90° 90° 0 0.2 0.4 0.6 0.8 0 0 20 40 60 80 Ambient Temperature Ta (°C) Purdy Electronics Corporation • 720 Palomar Avenue • Sunnyvale, CA 94085 Tel: 408.523.8200 • Fax: 408.733.1287 • [email protected] • www.purdyelectronics.com 100 7/18/07