AND5OA Ultra Bright LED Lamps Weight: 2.0 Unit: mm AND5OA Cathode Index 3.2±0.2 ø1.8±0.1 2.2±0.1 R0.9±0.1 InGaAIP Ultra Bright Orange Light Emission Surface Mount Package Features • RoHS Compliant • Small package size with dome lens • 3.2 (l) x 2.4 (w) x 2.6 (h) size • Suitable for REFLOW soldering • Recommended Forward Current: 10 mA 0.5±0.1 0.5±0.1 2.4±0.1 Maximum Ratings (Ta = 25°C) 2.0 2.5±0.2 Polarity Characteristics Symbol Rating Unit Forward Current IF 30 mA Reverse Voltage VR 4 V Power Dissipation PD 100 mW Operating Temperature Range TOpr -30 to 85 °C Storage Temperature Range TStg -30to 90 °C Electro-Optical Characteristics (Ta = 25°C) Characteristics Symbol Test Condition Minimum Typical Forward Voltage VF IF = 20 mA – 2.1 2.8 V Reverse Current IR VR = 4 V – – 100 µA Luminous Intensity IV IF = 20 mA 490 750 – mcd Peak Emission Wavelength lP IF = 20 mA – 620 – nm Spectral Line Half Width ∆λ IF = 20 mA – 18 – nm Dominant Wavelength λd IF = 20 mA – 615 – nm Full Viewing Angle θ IV = 1/2 Peak – 30 – degree Precaution Please be careful of the following: 1. Manual soldering: maximum temperature of iron tip: 260°C max. Soldering time: within 5 sec. per solder-land Soldering portion of lead: up to 1.6 mm from the body of the device 2. Reflow solder: recommended condition is as follows: 140 - 160°C Product specifications contained herein may be changed without prior notice. It is therefore advisable to contact Purdy Electronics before proceeding with the design of equipment incorporating this product. The following soldering patterns are recommended for reflow soldering 230°C max. more than 2 min. Time Unit Reflow 4°C/sec. max. 2.5 Temperature 10 sec. max. Maximum 2.5 2.0 2.5 Purdy Electronics Corporation • 720 Palomar Avenue • Sunnyvale, CA 94085 Tel: 408.523.8200 • Fax: 408.733.1287 • [email protected] www.purdyelectronics.com 6/12/07 AND5OA InGaAIP Ultra Bright Orange Light Emission Ultra Bright LED Lamps IV – IF IF – VF 1000 10 5 3 1 1.6 Ta = 25°C 500 Ta = 25°C 30 Luminous Intensity IV (mcd) Forward Current IF (mA) 50 300 100 50 30 10 1.7 1.8 1.9 2.0 2.1 2.2 2.3 1 3 Forward Voltage VF (V) IV – TC 10 30 50 100 Relative Luminous Intensity – Wavelength 3 1.0 Relative Luminous Intensity Relative Luminous Intensity 5 Forward Current IF (mA) 1 0.5 0.3 0.1 -20 0 20 40 60 IF = 20 mA Ta = 25°C 0.8 0.6 0.4 0.2 0 580 80 600 620 640 660 680 700 Wavelength λ (nm) Case Temperature TC (°C) Radiation Pattern IF – Ta 20° 10° 0° 10° Ta = 25°C 20° 30° 30° 40° 40° 50° 50° 60° 60° 70° 70° 80° 80° Allowable Forward Current IF (mA) 40 30 20 10 90° 90° 0 0.2 0.4 0.6 0.8 0 0 20 40 60 80 Ambient Temperature Ta (°C) Purdy Electronics Corporation • 720 Palomar Avenue • Sunnyvale, CA 94085 Tel: 408.523.8200 • Fax: 408.733.1287 • [email protected] www.purdyelectronics.com 100 6/12/07