AND6BA Ultra Bright LED Lamps Weight: 2.0 Unit: mm AND6BA GaN Ultra Bright Blue Light Emission Surface Mount Pkg Features • RoHS Compliant • P-LCC-2 package with optical indicator • Wide viewing angle • Suitable for vapor-phase refow, infrared refow and wave solder processes • Low current operation: 2 mA • Ideal for (LCD) backlight & light pipe applications • Compatible with automatic placement equipment Maximum Ratings (Ta = 25°C) Product specifications contained herein may be changed without prior notice. It is therefore advisable to contact Purdy Electronics before proceeding with the design of equipment incorporating this product. Characteristics Symbol Rating Unit Forward Current IF 30 mA Reverse Voltage VR 5 V Power Dissipation PD 120 mW Operating Temperature Range TOpr -20 to 80 °C Storage Temperature Range TStg -30to 90 °C Electro-Optical Characteristics (Ta = 25°C) Characteristics Symbol Test Condition Minimum Typical Maximum Unit Forward Voltage VF IF = 20 mA – 3.8 4.5 V Reverse Current IR VR = 5 V – – 50 µA Luminous Intensity IV IF = 20 mA 35 55 – mcd Peak Emission Wavelength lP IF = 20 mA – 428 – nm Spectral Line Half Width ∆l IF = 20 mA – 65 – nm Dominant Wavelength ld IF = 20 mA – 466 – nm 2 q 1/2 IF = 20 mA – 120 – degree Full Viewing Angle Precaution Please be careful of the following: 1. Manual soldering: maximum temperature of iron tip: 260°C max. Soldering time: within 5 sec. per solder-land Soldering portion of lead: up to 1.6 mm from the body of the device 2. Reflow solder: recommended condition is as follows: 3. Absolute secure counter measures against static electricity and surge should be taken when handling these products. It is recommended to use wrist band or antistatic gloves when handling these LEDs. Temperature 10 sec. max. 140 - 160°C 230°C max. more than 2 min. 4°C/sec. max. Time Purdy Electronics Corporation • 720 Palomar Avenue • Sunnyvale, CA 94085 Tel: 408.523.8200 • Fax: 408.733.1287 • [email protected] www.purdyelectronics.com 7/18/07 AND6BA GaN Ultra Bright Blue Light Emission Surface Mount Pkg IF – VF Ultra Bright LED Lamps IV – IF 50 1000 Ta = 25°C Luminous Intensity IV (mcd) Forward Current IF (mA) 40 30 20 100 10 1 10 2.0 3.0 2.5 3.5 4.0 1 4.5 2 Forward Voltage VF (V) 10 20 100 100 IF = 20 mA Ta = 25°C Relative Luminous Intensity Ta = 25°C Relative Luminous Intensity 50 Relative Luminous Intensity – Wavelength IV – TC 1000 5 Forward Current IF (mA) 100 10 75 50 25 1 -20 0 20 40 0 80 60 350 400 450 500 550 Wavelength λ (nm) Case Temperature TC (°C) Radiation Pattern IF – Ta 20° 10° 0° 10° Ta = 25°C 20° 30° 30° 40° 40° 50° 50° 60° 60° 70° 70° 80° 80° Allowable Forward Current IF (mA) 40 30 20 10 90° 90° 0 0.2 0.4 0.6 0.8 0 0 20 40 60 80 Ambient Temperature Ta (°C) Purdy Electronics Corporation • 720 Palomar Avenue • Sunnyvale, CA 94085 Tel: 408.523.8200 • Fax: 408.733.1287 • [email protected] www.purdyelectronics.com 100 7/18/07