Displays AND-TFT-5TS-DHB-KIT 320 x 234 Pixels LCD Color Monitor The AND-TFT-5TS-DHB-KIT is a compact full color TFT LCD module, whose driving board is capable of converting composite video signals to the proper interface of LCD panel and is suitable for security, car TV, portable DVD and GPS applications. It can accept NTSC & ARGB video signal input. This device consists of a twisted nematic (TN) liquid crystal cell, that incorporates a TFT-array that has 320 x 234 pixels on a 5 inch diagonal screen, X and Y drivers, an LSI controller, and a built-in CCFL backlight and inverter (with optional board.) Features • • • • • • • • Ultra compact DC/DC DC/AC Video decoder all in one VGA Mode input NTSC/PAL System auto switching Up/Down display reverse Left/Right display reverse Single operation voltage +12V Applications: security, video game, door phone, video phone portable TV, GPS, instrument display and office electronics • RoHS compliant Mechanical Characteristics Item Specification Screen Size – 320 x 234 dot Active Area 102.72 (H) x 74.53 (V) mm Dot Pitch 0.107 (W) x 0.319 (H) mm stripe – 119.3 (W) x 91.4 (H) x 7.5 (D) mm 124 ± 10 g 150:1 – (V) + 15º / -35º (H) ± 55º – Full Color – 500 cd/m2 Display Format Pixel Configuration Outline Dimension Weight Part List: • AND-TFT-5TS-DHB (Display) • PC-TFT-5TS (NTSC/PAL Controller) • 292113N Ver 1.1 (User Interface board) • 28 pin flex cable • +12 DC Power adapter Unit 5.0 inch (13 cm) diagonal Contrast Ratio View Angle Color Brightness Application Precautions: Do not use the products herein for the following equipment which demands extremely high performance in terms of functionality, reliability, or accuracy. (Aerospace equipment, Communications equipment for trunk lines, control equipment for the nuclear power industry, and medical equipment relater to life support, etc. Contact us for other applications that demands high reliability and functionality. Absolute Maximum Rating (GND = 0V, Ta = 25°C) Item Absolute Maximum Rating Symbol Remarks Min. Max. Vin – +9 +15 V Video Input Signal Video in @75 Ω 0.5 2.0 Vp-p Digital Input Signal TTL – +0.3 +5.3 V Input Voltage Unit Operating Temperature – – -10 60 °C Relative Humidity – – 5 90 %RH Storage Temperature – – -25 80 °C Relative Humidity – 0 90 %RH Product specifications contained herein may be changed without prior notice. It is therefore advisable to contact Purdy Electronics before proceeding with the design of equipment incorporating this product. 3/13/08 Purdy Electronics Corporation • 720 Palomar Avenue • Sunnyvale, CA 94085 Tel: 408.523.8200 • Fax: 408.733.1287 • [email protected] • www.purdyelectronics.com 1 Displays AND-TFT-5TS-DHB-KIT Electrical Characteristics Item Symbol I/O Min. Typ. Max. Unit Input Voltage Vin I +10 +12 +14 V Total Current Iin I 490 470 450 mA Remark Power Consumption – I – 5.64 – W @ +12V Video Input Signal Video in I – 1.0 – Vp-p @75 Ω Output Voltage +5VA O – +5V – V Brightness Adjust Bright I 2.31 2.10 1.90 V Contrast Adjust Contrast I 3.60 3.00 2.40 V Color Adjust Color I 2.10 3.00 3.90 V Picture – I 3.00 2.10 1.5 V Dimmer Adjust DIM I 5.00 1.50 0 V Screen Reverse Left / Right I – TTL – V Screen Reverse Up ? Down I – TTL – V Output for LCD Panel Backlight Pin No. Symbol I/O Function Remark 1 HV+ O High voltage terminal for backlight Connect to pink wire 2 HV- – Return terminal for backlight connect to white wire Lamp Data Ta = 25ºC @ +12V Item Symbol Min. Typ. Max. Unit Lamp Voltage VL – 430 – Vrms Lamp Current IL – 6.0 – mA Remark IL = 6.0 mA, (± 10%) Sample Test Data – S/N : 001 x y L TC White Window Red Blue Green 0.315 – – – 0.341 – – – 400 cd/m2 – – – 6487 ºK – – – Note 1: Luminance: BM-7 FAST (TOPCON) Note 2: Pattern Generator: FLUKE PM54200 Note 3: Measurement Distance: 500mm ± 50mm Note 4: TOPCON BM-7 Luminance Meter 2º field of view is used in the testing (After 10 min ~ 20 min Operation) 3/13/08 Remark ± 15% Purdy Electronics Corporation • 720 Palomar Avenue • Sunnyvale, CA 94085 Tel: 408.523.8200 • Fax: 408.733.1287 • [email protected] • www.purdyelectronics.com 2 Displays AND-TFT-5TS-DHB-KIT LCD Panel I/O Terminals (FPC 30-pin below contact type): Pin #. Symbol I/O Function 1 DIO1 I/O Vertical start pulse 2 CPV I Shift clock for gate driver 3 VGL I Power for gate driver (AC voltage) 4 NC – No connection 5 VEE I Negative powe gate driver (DC voltage) 6 NC – No connection 7 XOE I Output enable for gate driver 8 VSS I Ground for digital circuit 9 VCC I Supply voltage for logic control circuit for gate driver 10 NC – No connection 11 VGH I Positive power for gate driver 12 NC – No connection 13 U/D I Up/Down control for gate driver 14 DIO2 I/O Vertical Start pulse 15 VCOM I Common electrode voltage 16 STH1 I/O Start pulse for source driver 17 VDD1 I Supply power for digital circuit 18 VSS1 – Ground for digital circuit 19 VDD2 I Supply power for analog circuit 20 VSS2 – Ground for analog circuit 21 R/L I Left/Right control for source driver 22 VR I Video input R 23 VG I Video input G 24 VB I Video input B 25 CPH1 I Sampling and shift clock for source driver 26 CPH2 I Samplling and shift clock for source driver 27 CPH3 I Sampling and shift clock for source driver 28 STH2 I/O Start pulse for source driver 29 OEH I Output enable for source driver 30 NC – No connection Note: About TFT-LCD Panel detail, please refer to to Purdy Electronics’ AND-TFT-5PA specification. (????) 3/13/08 Purdy Electronics Corporation • 720 Palomar Avenue • Sunnyvale, CA 94085 Tel: 408.523.8200 • Fax: 408.733.1287 • [email protected] • www.purdyelectronics.com 3 Displays AND-TFT-5TS-DHB-KIT Application Circuit 3/13/08 Purdy Electronics Corporation • 720 Palomar Avenue • Sunnyvale, CA 94085 Tel: 408.523.8200 • Fax: 408.733.1287 • [email protected] • www.purdyelectronics.com 4 Displays AND-TFT-5TS-DHB-KIT Dimensional Outline General mechanical tolerance = 0.5mm 3/13/08 Purdy Electronics Corporation • 720 Palomar Avenue • Sunnyvale, CA 94085 Tel: 408.523.8200 • Fax: 408.733.1287 • [email protected] • www.purdyelectronics.com 5 Displays AND-TFT-5TS-DHB-KIT Pin Assignment of Signal Input (Pitch 1.0mm, down conector type) Pin No. Symbol I/O Function Remark 1 Bright I Brightness control 2 Contrast I Contrast control 3 Picture I Picture control 4 Color I Color control 5 NTSC/PAL O NTSC/PAL system switch 6 Video in I Composite Video input 7 GND I Signal Ground 8 G-IN I Analog B signal input (Blue) 9 G-IN I Analog G signal input (Green) 10 R-IN I Analog R signal input (Red) 11 SW I Composite video / RGB Switch control 12 Left/Right I Left / Right revrerse control 13 VIY I Vertical sync. input pin for sync (VGA mode) Note 1 Note 2 14 CIY I Horizontal sync. input pin for sync (VGA mode) Note 3 15 VSY I/O Vertical synch. input / output Note 3 16 HSY I/O Horizontal synch. input / output Note 3 17 CKC I Control pin for select I/O signal Note 3 18 VGA – VGA mode select pin Note 4 19 Up/Down I Up / Down reverse control Note 2 20 GND – Power ground 21 VDD O +5V Voltage DC output 22 GND – Power ground 23 GND – Power ground 24 VCC – Power input 25 VCC – Power input 26 GND – Power ground 27 Dimmer I Backlight brightness control Note 6 28 ENABLE – Enable signal for inverter Note 7 Note 5 Note 1: The output Hight for NTSC mode or Low for PAL mode. Note 2: Default is normal scanning (Hight) and Low is for reversed scanning. Note 3: CKC pin can select the function of pin 16, 15, 14 as following: Pin 17 (CKC) Pin 15 (VSY) Pin 16 (HSY) Pin 14 (VSY) Hi HSY Output VSY Output CIY Input Low External H-Sync input External V-Sync input External clock input (18.9 MHz) Note 4: Hi (+5V) for VGA input, Low (0V, default) for composite Video or RGB input. The relationship of SW pin & VGA is defined: Input SW-1 SW-2 SW-3 SW-4 SW-5 SW-6 SW-7 SW-8 VGA Off Off Off Off Off Off Off Off NTSC On On Off Off Off Off Off Off Note 5: The +5V power supply external control circuit. (Max output is 5mA) Note 6: This pin is floating that backlight is typical brightness. Note 7: 0V to shunt down; 5V or floating to enable 3/13/08 Purdy Electronics Corporation • 720 Palomar Avenue • Sunnyvale, CA 94085 Tel: 408.523.8200 • Fax: 408.733.1287 • [email protected] • www.purdyelectronics.com 6 Displays AND-TFT-5TS-DHB-KIT User Interface Board 3/13/08 Purdy Electronics Corporation • 720 Palomar Avenue • Sunnyvale, CA 94085 Tel: 408.523.8200 • Fax: 408.733.1287 • [email protected] • www.purdyelectronics.com 7