REVISION DESCRIPTION REV. P1 3 C2 C1 16 8 1 APPROVED 915 ± 30 C5 C4 C3 24 DATE 4 5 6 7 13 12 11 14 15 5 10 15 10 16 8 9 P2 2 17 9 1 1 3.80 ± 0.3 3.80 ± 0.3 HD15P/M MOLDED TYPE (MOLD NO.: G102-154) FRONT No. DVI (12+5)P/M ASS’Y TYPE TAPE PIN OUT P1 120 ± 20 C1 18 17 RED C5 C2 GREEN C5 C3 C5 6 7 FRONT SPECIFICATION STANDARD QTY 1 DVI (12+5)P/M - CONTACT BRONZE/GOLD FLASH SOLDER TYPE 17 2 DVI (12+5)P/M - INSULATOR PBT/BLACK UL 94V-0 1 3 DVI (12+5)P/M - SHELL STEEL NICKEL PLATED 1 4 DVI (12+5)P/M - CAN STEEL TIN PLATED 1 5 DVI (12+5)P/M - COVER 45P PVC/COLOR: BLACK 1 6 THUMB SCREW #4-40 2.8x45, NICKEL PLATED 2 7 SCREW MOLD 35P PVC/COLOR: BLACK 2 P1 1 C4 ORANGE 13 8 HD15P/M - CONTACT BRASS GOLD FLASH SOLDER TYPE 15 6 8 BLUE 14 9 HD15P/M - INSULATOR PBT/BLACK UL 94V-0 1 15 BLACK 10 10 HD15P/M - SHELL STEEL NICKEL PLATED 1 11 HD15P/M - INNER MOLD PE NATURAL 1 12 HD15P/M - COPPER FOIL WIDTH: 28mm 1 13 HD15P/M - OUTER MOLD 45P PVC/COLOR: BLACK 1 14 HD15P/M - THUMB SCREW UNC #4-40 ∅4xL50, NICKEL PLATED 2 15 HD15P/M - SCREW MOLD 35P PVC/COLOR: BLACK 2 16 CABLE DVI 12+5 UL20276 L03010ABK01A 1 17 MINI TIE PE/BLACK 2 18 POLYBAG PE/0.8x160x200mm 1 2 P2 5 3 8 WHITE YELLOW 11 P2 7 BLUE PARTS NAME 6 15 12 14 RED 9 16 SHELL BRAID NOTES: 1. CABLE: UL20276 (28AWGxSP+FOIL)x3C+28AWGx4C+28AWGx1P+MYLAR+FOIL+BD OUTER JACKET: BLACK, OD: 6.5 ± 0.2mm PRINTING: “E166307 AWM 20276 28AWG 80°C 30V VW-1 LOW VOLTAGE COMPUTER CABLE” 2. CONNECTORS: DVI (12+5)P/M-HD15P/M 3. HOOD: ASS’Y TYPE & MOLDED TYPE 4. ELECTRICAL TEST: <1>.100% OPEN SHORT & MISS WIRE TEST <2>. INSULATION RESISTANCE: DC400V 10M ohm MIN. <3>. CONDUCTOR RESISTANCE: 3 ohm MAX. 5. PACKING: 1PC/POLYBAG SHELL Dim range (mm) Tolerance +/(mm) 0-1 0.15 1-6 0.20 6-18 0.30 Qualtek Electronics Corp. WCI DIVISION Part Number: 1321001-03 Description: DVI (12+5)P/M - HD15P/M 18-50 0.50 50-120 0.70 Drawn / Date Checked / Date Approved / Date 120-250 0.90 250-500 1.20 B. Grubb 01-24-07 01-24-07 JJH / 01-24-07