REVISION DESCRIPTION Changed Pin Out REV. A DATE 03-12-07 APPROVED DP 915 ± 30 1 P1 2 4 5 6 3 7.0 ± 0.2 13 4 3 2 1 1 2 3 4 5 FRONT USB 4P(A)/M MOLDING TYPE (MOLD NO: G102-506) MINI USB5P(B)/M MOLDING TYPE (MOLD NO: G102-718) No. P1 100 ± 20 15 14 1 2 GREEN 3 WHITE 4 SHELL BLACK DRAIN BRAID 8 FRONT SPECIFICATION STANDARD QTY REMARKS USB 4P(A)/M - CONTACT BRASS / GOLD PLATED (CRIMPING TYPE) 4 2 USB 4P(A)/M - INSULATOR PBT + G,F / WHITE UL 94V-0 1 3 USB 4P(A)/M - SHELL 1 STEEL NICKEL PLATED 1 1 4 USB 4P(A)/M - SHELL 2 STEEL NICKEL PLATED 1 2 5 USB 4P(A)/M - COPPER FOIL WIDTH 5xLENGTH 27 1 6 USB 4P(A)/M - OUTER MOLD 45P PVC / COLOR: BLACK 1 7 MINI USB(B)5P/M - CONTACT BRASS / GOLD PLATED SOLDER TYPE 5 8 MINI USB(B)5P/M - INSULATOR PBT + G,F / BLACK UL 94V-0 1 9 MINI USB(B)5P/M - SHELL 1 SHELL / NICKEL PLATED 1 10 MINI USB(B)5P/M - SHELL 2 SHELL / NICKEL PLATED 1 11 MINI USB(B)5P/M - COPPER FOIL WIDTH 5xLENGTH 27 1 12 MINI USB(B)5P/M - OUTER MOLD 45P PVC / COLOR: BLACK 1 13 CABLE KL01103ABK01A 1 14 MINI TIE PE / BLACK P2 RED PARTS NAME 7 1 PIN OUT TAPE 10 9 12 11 12.2 ± 0.4 3 4 (NOT CONNECTED) 5 NOTES: 1. CABLE: UL2725 28/28AWG (28AWGx1P+28AWGx2C+FOIL+DW+BD)x1 OUTER JACKET: BLACK, OD: 4.0 ± 0.2mm PRINTING: “E166307 AWM 2725 28AWG 80°C 30V VW-1 HI-SPEED USB2.0” 2. CONNECTORS: USB 4P(A) MALE TO USB MINI 5P(B) MALE 3. HOOD: MOLDED TYPE 4. ELECTRICAL TEST: <1>.100% OPEN SHORT & MISS WIRE TEST <2>. INSULATION RESISTANCE: DC400V 10M ohm MIN. <3>. CONDUCTOR RESISTANCE: 3 ohm MAX. 5. PACKING: 1PC/POLYBAG 15 2 PE: 0.08x140x160 POLYBAG Dim range (mm) Tolerance +/(mm) 0-1 0.15 1-6 0.20 6-18 0.30 18-50 0.50 1 SET Qualtek Electronics Corp. WCI DIVISION Part Number: 3021003-03 Description: USB 4P(A) MALE TO USB MINI 5P(B) MALE REV. A 50-120 0.70 Drawn / Date Checked / Date Approved / Date 120-250 0.90 250-500 1.20 B. Grubb 01-26-07 01-26-07 JJH / 01-26-07