REVISION THESE DRAWINGS ARE THE PROPERTY OF QUALTEK ELECTRONICS AND NOT TO BE REPRODUCED FOR OR COMMUNICATED TO A THIRD PARTY WITHOUT THE EXPRESS WRITTEN PERMISSION OF AN OFFICER OF QUALTEK ELECTRONICS. REV. B C MECHANICAL DIMENSIONS: APPROVED DP DP 1-1. VOLTAGE RATING.....................................................115/250VAC 1-2. CURRENT RATING A. @ 115/250 VAC (UL, CSA) ..............6/6 A RMS MAX B. @ 250 VAC (SEMKO) ...........................6 A RMS MAX 1-3. OPERATING FREQUENCY................................................... 50-60Hz 1-4. LEAKAGE CURRENT EACH LINE TO GROUND A. AT 115VAC 60Hz............................................ 2uA MAX. B. AT 250VAC 50Hz............................................. 5uA MAX. 1-5. HIPOT RATING (FOR ONE MINUTE) A. LINE TO GROUND...........................2000 VAC B. LINE TO LINE.....................................2000 VAC 1-6. MINIMUM INSULATION RESISTANCE: @ 500VDC A. LINE & NEUTRAL TO GROUND..............100M OHM B. LINE TO NEUTRAL......................................100M OHM 1-7. AMBIENT TEMPERATURE ............................................................. 25°C 1-8. OPERATING TEMPERATURE .................................... -25°C TO +85°C 1.9. APPROVALS: UL, CSA, SEMKO 1-10. RoHS COMPLIANT 0.57 1.15 1.71 0.43 1.81 LABEL 2.57 1.059 MAX 1.063 ± 0.003 2.6 ± 0.003 PANEL CUTOUT RECOMMENDED PANEL THICKNESS: 0.04~0.07in ELECTRICAL SCHEMATIC: DATE 06-01-06 01-24-08 RoHS Compliancy Updated Specifications ELECTRICAL CHARACTERISTICS: 2.65 R0.04 MAX DESCRIPTION Dim range (mm) Tolerance +/(mm) 0-1 0.15 1-6 0.20 6-18 0.30 18-50 0.50 CONTROLLED Qualtek Electronics Corp. PPC DIVISION 762-18/002 Part Number: Description: MULTI-FUNCTION MODULE UNIT: in REV. C 50-120 0.70 Drawn / Date Checked / Date Approved / Date 120-250 0.90 250-500 1.20 B.ZHANG 03-19-04 03-19-04 JJH / 03-19-04