HEAT SHRINK MEDIUM / HEAVY WALL TUBING - ADHESIVE LINED Qualtek Electronics QR2, QRA2 MEDIUM WALL, POLYOLEFIN TUBING WITH OR WITHOUT HOT MELT ADHESIVE SHRINK RATIO 3:1 Features/Applications QR2 has properties of excellent insulation, environmental sealing and resistance to impact and abrasion. Designed for applications to seal and protect electrical and communication connections, providing excellent mechanical protection to cable joints and terminations. 3:1 shrink ratio allows it to easily fit over irregular shapes and large connectors. 3 QRA2 is recommended for applications with light cable and wire harnesses that require waterproofing and protection of connector components and encapsulates and seals components within the tubing. Operating temperature: -55°C to +110°C Full recovery temperature: 120°C Standard color: Black, red RoHS Compliant Resistant to UV radiation High electrical insulation Superior mechanical property Technical Data QRA2, Medium-Wall Tubing With Hot-Melt Adhesive Property Test Method Typical Data IEC 216 -55°C TO +110°C Tensile Strength ASTM D 2671 > 14 MPa Tensile Strength After Aging (150°C, 168hrs.) ASTM D 2671 > 12MPa Elongation at Break ASTM D 2671 > 400% Elongation at Break After Aging (150°C, 168hrs.) ASTM D 2671 > 300% Density ASTM D 792 1.05g/cm 3 Operating Temperature Longitudinal Shrinkage UL 224 0 to -10% Dielectric Strength IEC 243 > 20kV/mm Volume Resistance IEC 93 > 10 14 Ω.cm Eccentricity ASTM D 2671 Copper Stability ASTM D 2671 Pass Resistance to Stress Cracking (50°C) ASTM D 1693 No cracking ISO 62 < 0.15% Water Absorption (23°C, 4days) < 30% Thermoplastic Adhesive for QRA2 Property Test Method Typical Data ISO 62 <0.2% Water Absorption Softening Point ASTM D E28 85°C DIN 30672 4N/cm ASTM D 2671 Non-corrosive ISO 846 Pass Peel Strength (PE) Copper Stability Resistance to Fungus and Decay Notes: 1. * See Part Number Guide for standard packaging codes. 2. Special sizes, packaging, colors and cut pieces are available upon request. ISO-9001 Company As Supplied (mm) Size (mm) 8/2 12/3 16/5 19/5 22/6 28/6 33/8 40/12 55/16 65/19 75/22 85/25 95/25 115/34 140/42 160/50 180/58 205/65 235/65 265/75 300/85 350/100 Standard Packaging After Recovered (mm) Inside Diameter (min.) Inside Diameter (max.) Wall Thickness (min.) 8 12 16 19 22 28 33 40 55 65 75 85 95 115 140 160 180 205 235 265 300 350 2 3 5 5 6 6 8 12 16 19 22 25 25 34 42 50 58 65 65 75 85 100 1.7 2.0 2.2 2.5 2.5 2.5 2.5 2.5 2.7 2.8 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 Tubing Shape Round Round Round Round Round Round Round Round Round Round Round Round Round Round Round Round Round Round Round Round Round Round Cut to Length Pcs. *(QB) Qty per bag 48” 20 20 20 20 20 20 20 15 15 15 15 15 10 10 10 5 5 5 5 5 5 5 QR2, Medium-Wall Tubing Without Hot-Melt Adhesive 8/2 12/3 16/5 22/6 33/8 40/12 55/16 65/19 75/22 85/25 95/25 115/34 140/42 160/50 180/58 205/65 235/65 265/75 300/85 350/100 8 12 16 22 33 40 55 65 75 85 95 115 140 160 180 205 235 265 300 350 2 3 5 6 8 12 16 19 22 25 25 34 42 50 58 65 65 75 85 100 1.7 2.0 2.2 2.2 2.5 2.5 2.7 2.8 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 Flat Flat Flat Round Round Round Round Round Round Round Round Round Flat Flat Flat Flat Flat Flat Flat Flat 20 20 20 20 20 20 15 15 15 15 15 10 10 10 5 5 5 5 5 5 www.qualtekusa.com QR2,A2-200C