Part No. NPAK-1MBA-6-3 Nitropak, 1/8" male NPT gauge adapter, 2 hoses, 2 process connections Self contained nitrogen source includes all connections and hoses to connect directly to a pressure gauge or calibrator Features • Proprietary pressure balanced fine adjustment piston allows for extremely precise, finger-tip control of pressure at 0.03 psi (2 mbar) or 3000 psi (210 bar) or any range in between. • Easily refillable nitrogen cylinder holds enough gas for multiple calibrations • Nylon bag to hold hose and fittings attached to inside of lid • Includes storage compartment in control panel for pressure reference test gauge • Low volume Quick-test hose, gauge adapter and process connection can be attached to NPAK without thread sealant or a wrench NPAK-1MBA-6-3 • Optional padded strap for field use (NPAK-STRP) • Made in U.S.A. Item Includes • Assembly - NPAK Assembly (NPAK) • Gauge Adapter - 1/8" male NPT x female QT, no check-valve, brass (QTHA-1MBA) • Hose - Quick-test hose, brass hose ends, 6 ft (1.83 m) long (QTQT-HOS-6ft) • Hose - Quick-test hose, brass hose ends, 3 ft (92 cm) long (QTQT-HOS-3ft) • Hose Adapter - 1/4" male NPT x male QT, no check-valve, brass (QTHA-2MB0) • Hose Adapter - 1/4" male NPT x male QT, no check-valve, brass (QTHA-2MB0) Specifications Pressure Range 0 to 3000 psi (0 to 207 bar) Vacuum Range 0 to 10"Hg (0 to 254 mmHG) Temperature range 0 to 130 °F (-18 to 54 °C) Construction ABS Plastic, Aluminum, Anodized Aluminum, Brass, Plated Steel, Stainless Steel, Zippered Nylon with Velcro Seal materials Buna-N, Delrin, Teflon Ralston Instruments Inc. | ralstoninst.com | Toll Free 800-347-6575 | Phone 440-564-1430 | Fax 440-564-1480