RECTRON BAT54WS

BAT54WS
Small-Signal Schottky Diodes
VOLTAGE RANGE 30 Volts CURRENT 100 mAmpere
FEATURES
*
*
*
*
Low Tum-on Voltage
Fast Switching Speed
Ultre-small Surface Mount Package
PN Junction Guard Ring for Transient and
ESD Protection
SOD-323
.071(1.80)
.063(1.60)
MECHANICAL DATA
Case: Molded plastic
Epoxy: UL 94V-O rate flame retardant
Lead: MIL-STD-202E method 208C guaranteed
Mounting position: Any
Weight: 0.004 grams
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25 OC ambient temperature unless otherwise specified.
Single phase, half wave, 60 Hz, resistive or inductive load.
.006(.15)
.014(.35)
.010(.25)
.055(1.40)
.047(1.20)
.106(2.70)
.098(2.50)
.003(.08)
*
*
*
*
*
MAX.039(1.00)
REF .019(0.46)
For capacitive load, derate current by 20%.
.004(.10)
.000(.00)
Dimensions in inches and (millimeters)
MAXIMUM RATINGS (@T A =25 OC unless otherwise noted)
RATINGS
SYMBOL
BAT54WS
UNITS
VRM
30
Volts
V(BR)R
30
Volts
Maximum DC Blocking Voltage
VR
21
Volts
Maximum Forward Comtinuous Current
200
100
mAmps
Maximum Average Forward Rectified Current
IFM
IO
Repetitive Peak Forward Current
IFRM
300
mAmps
Forward Surge Current
Typical Reverse Recovery Time (Note 1)
IFSM
T rr
600
mAmps
CT
5.0
10
nS
pF
PD
200
mW
RqJA
625
K/W
Non-Repetitive Peak Reverse Voltage
Reverse Breakdown Voltage @IR=100mA
Typical Junction Capacitance (Note 2)
Maximum Power Dissipation (Note 3)
Typical Thermal Resistance
Junction Temperature
Storage Temperature Range
mAmps
TJ
125
O
TSTG
-65 to + 150
O
C
C
ELECTRICAL CHARACTERISTICS (@T A =25 OC unless otherwise noted)
CHARACTERISTICS
SYMBOL
BAT54WS
UNITS
Maximum Instantaneous Forward Voltage
@IF=0.1mA
@IF=1.0mA
@IF=10mA
@IF=30mA
@IF=100mA
VF
240
320
400
500
1000
mVolts
Maximum Instantaneous Peverse Current
@VR=25V
IR
2.0
uAmps
NOTES : 1. Measured at I F=I R=10mA,I RR=0.1XI R And R L=100 W.
2. Measured at 1MHz and applied reverse voltage of 0 volts.
3. Part mounted on FR-4 PC board with minimunm recommended pad layout.
2008-12
REV: A
RATING AND CHARACTERISTICS CURVES ( BAT54WS )
1
IR, REVERSE CURRENT(mA)
0.1
TJ = 150 OC
125 OC
0.1
100 OC
0.01
75 OC
50 OC
0.001
25 OC
0.0001
0.00001
0
5
0.01
15
20
25
30
Figure2 Typical Foward Characteristics
10
TJ = 150 OC
TJ = 125 OC
0
0
TJ = 25 OC
0
0.2
0.4
0.6
0.8
TJ = 25 OC
1
1
0
5
0.3
DC
D = 0.20
D = 0.25
0.1
0
D = 0.33
D = 0.50
D = 0.75
0
0.1
0.2
IF(AV), AVERAGE FORWARD CURRENT (A)
Figure4 Forward Power Loss Characteristics
0.3
IFSM, NON-REPETITIVE SURGE CURRENT (A)
0.4
RMS Limit
15
20
25
30
Figure3 Typical Capacitance vs Reverse Voltage
Figure1 Max. Forward Voltage Drop Characteristics
0.2
10
VR, REVERSE VOLTAGE(V)
VFM, FORWARD VOLTAGE DROP (V)
IR, AVERAGE POWER LOSS (W)
10
VR, REVERSE VOLTAGE (V)
CT,TOTAL CAPACITANCE(pF)
IF, INSTANTANEOUS FORWARD CURRENT (A)
1
10
1
At Any Rated Load Condition
And With Rated Vmm Applied
Following Surge
0.1
10
100
1000
10000
Tp, SQUARE WAVE PULSE DURATION (V)
Figure5 Max. Non-Repetitive Surge Current
DISCLAIMER NOTICE
Rectron Inc reserves the right to make changes without notice to any product
specification herein, to make corrections, modifications, enhancements or other
changes. Rectron Inc or anyone on its behalf assumes no responsibility or liability for any errors or inaccuracies. Data sheet specifications and its information
contained are intended to provide a product description only. "Typical" parameters which may be included on RECTRON data sheets and/ or specifications can and do vary in different applications and actual performance may vary over time. Rectron Inc does not assume any liability arising out of the application or
use of any product or circuit.
Rectron products are not designed, intended or authorized for use in medical,
life-saving implant or other applications intended for life-sustaining or other related applications where a failure or malfunction of component or circuitry may directly or indirectly cause injury or threaten a life without expressed written approval of Rectron Inc. Customers using or selling Rectron components for use in
such applications do so at their own risk and shall agree to fully indemnify Rectron Inc and its subsidiaries harmless against all claims, damages and expenditures.
RECTRON