SA1L THRU SA7L SURFACE MOUNT SILICON RECTIFIER VOLTAGE RANGE 50 to 1000 Volts CURRENT 1.0 Ampere FEATURES * * * * * Ideal for surface mounted applications Low leakage current Metallurgically bonded construction Mounting position: Any Weight: 0.016 gram SOD-123FL MECHANICAL DATA .114 (2.9) .106 (2.7) * Epoxy : Device has UL flammability classification 94V-0 .035 (0.90) .077 (1.95) .028 (0.70) .069 (1.75) .008 (0.20) .039 (1.00) .035 (0.90) .150 (3.8) .142 (3.6) .052 (1.32) .050 (1.28) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 o C ambient temperature unless otherwise specified. .033 (0.85) .033 (0.85) Single phase, half wave, 60 Hz, resistive or inductive load. .044 (1.12) .030 (0.75) For capacitive load, derate current by 20%. .030 (0.75) .043 (1.08) Dimensions in inches and (millimeters) MAXIMUM RATINGS (@ TA=25 OC unless otherwise noted) RATINGS Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current at T A = 55 o C Peak Forward Surge Current IFM(surge): 8.3 ms single half sine-wave superimposed on rated load (JEDEC method) SYMBOL SA1L SA2L SA3L SA4L SA5L SA6L SA7L UNITS VRRM 50 100 200 400 600 800 1000 Volts VRMS 35 70 140 280 420 560 700 Volts VDC 50 100 200 400 600 800 1000 Volts IO 1.0 Amps I FSM 25 Amps RqJA Typical Thermal Resistance (Note 3) 85 RqJL Typical Junction Capacitance (Note 1) Operating and Storage Temperature Range 0 25 30 CJ 8 T J, T STG -55 to + 150 C/W pF 0 C ELECTRICAL CHARACTERISTICS (@TA=25 OC unless otherwise noted) SYMBOL CHARACTERISTICS Maximum Forward Voltage at 1.0A DC Maximum DC Average Reverse Current at Rated DC Blocking Voltage @T A = 25 o C @T A = 100 o C NOTES : 1. Measured at 1.0 MHz and applied average voltage of 4.0VDC 2. “Fully ROHS compliant”, “100% Sn plating (Pb-free)”. 3. Thernal Resistance: Mounted on PCB. SA1L SA2L SA3L SA4L SA5L SA6L SA7L UNITS VF 1.1 Volts IR 2.0 50 mAmps mAmps 2006-12 RATING AND CHARACTERISTICS CURVES ( SA1L THRU SA7L ) PEAK FORWARD SURGE CURRENT, (A) AVERAGE FORWARD CURRENT, (A) 1.0 0.8 0.6 0.4 Single Phase Half Wave 60Hz Resistive or Inductive Load 0.2 0 0 25 50 75 100 125 150 175 50 8.3ms Single Half Sine-Wave (JEDED Method) 40 30 20 10 0 0 2 4 O INSTANTANEOUS REVERSE CURRENT, (mA) 10 1.0 TA = 100 OC 0.1 Pulse Width = 300ms 1% Duty Cycle 0.01 0 0.5 1.0 1.5 2.0 6 8 10 40 60 80 100 2.5 3.0 FIG.2 MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT 100 40 T = 100 OC A 10 4 O 1.0 TA = 25 C 0.4 0.1 0 INSTANTANEOUS FORWARD VOLTAGE, (V) 20 40 60 100 FIG.4 TYPICAL REVERSE CHARACTERISTICS 200 TA = 25 OC 100 60 40 20 10 6 4 2 0.1 0.2 80 120 PERCENT OF RATED PEAK REVERSE VOLTAGE, (%) FIG.3 TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS 1 20 NUMBER OF CYCLES AT 60Hz FIG.1 TYPICAL FORWARD CURRENT DERATING CURVE JUNCTION CAPACITANCE, (pF) INSTANTANEOUS FORWARD CURRENT, (A) AMBIENT TEMPERATURE, ( C) 0.4 1.0 2 4 10 20 40 REVERSE VOLTAGE, (V) FIG.5 TYPICAL JUNCTION CAPACITANCE 100 140 Mounting Pad Layout .052 MIN. (1.32 MIN.) .033 MIN. (0.85 MIN.) .044 MIN. (1.12 MIN.) 0.165 (4.19) REF Dimensions in inches and (millimeters) .033 MIN. (0.85 MIN.) DISCLAIMER NOTICE Rectron Inc reserves the right to make changes without notice to any product specification herein, to make corrections, modifications, enhancements or other changes. Rectron Inc or anyone on its behalf assumes no responsibility or liability for any errors or inaccuracies. Data sheet specifications and its information contained are intended to provide a product description only. "Typical" parameters which may be included on RECTRON data sheets and/ or specifications can and do vary in different applications and actual performance may vary over time. Rectron Inc does not assume any liability arising out of the application or use of any product or circuit. Rectron products are not designed, intended or authorized for use in medical, life-saving implant or other applications intended for life-sustaining or other related applications where a failure or malfunction of component or circuitry may directly or indirectly cause injury or threaten a life without expressed written approval of Rectron Inc. Customers using or selling Rectron components for use in such applications do so at their own risk and shall agree to fully indemnify Rectron Inc and its subsidiaries harmless against all claims, damages and expenditures.