TRANSIENT VOLTAGE SUPPRESSOR DIODE P4KE, SA, P6KE, 1.5KE, 5KP; 400W to 5000W PPK FEATURES • Epoxy: UL 94V-0 rated flame retardant • Excellent clamping capability • Low zener impedance • Fast response time, typically less than 1ps from 0 volts to BV min • Typical IR less than 1 uA above 10V • High temperature soldering guarantied: 250°C/10 sec./.375", (9.5mm) lead length/5lbs., (2.3kg) tension DIAGRAM A B MECHANICAL DATA E D • Case: Molded plastic • Terminals: Axial Leads, solderable per MIL-STD-202, method 208 • Polarity: color band denotes cathode except bipolar C DIMENSIONS Series Package Code P4KE DO-41 in mm P6KE DO-15 in SA mm 1.5KE DO-201 in mm 5KP P-600 in mm A Max 0.205 5.2 0.300 7.6 0.375 9.5 0.36 9.1 Min 0.166 4.2 0.230 5.8 0.285 7.2 0.34 8.5 B Min 1.00 24.4 1.00 25.4 1.00 25.4 1.00 25.4 C Max 2.205 54.0 2.300 58.4 2.375 60.3 2.36 59.9 Min 2.166 53.0 2.230 56.6 2.285 58.0 2.34 59.3 D Max Min 0.107 0.080 2.7 2.0 0.140 0.104 3.6 2.6 0.220 0.197 5.6 5.0 0.360 0.340 8.6 9.1 E Max 0.340 0.9 0.034 0.9 0.042 1.1 0.052 1.3 Min 0.028 0.7 0.028 0.7 0.038 1.0 0.048 1.2 MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Rating at 25°C ambient temperature unless otherwise specified. Single Phase, Half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. Specification Symbol Peak Power Dissipation at TA=25°C, T P=1ms * Steady State Power Dissipation at T L=75°C Lead Lengths .375", 9.5mm ** Peak Forward Surge Current, 8.3ms single half sine-wave superimposed on rated load (JEDEC method)*** Operating and Storage Temperature Range PPK PD P4KE 400 min 1.0 IFSM 40.0 SA 500 min 1.0 70.0 Value P6KE 600 min 5.0 1.5KE 1500 min 5.0 5KP 5000 min 8.0 Units Watts Watts 100.0 200.0 400.0 Amps Tj, TSTG -65 to +150 -55 to +175 -65 to +150 -65 to +150 -55 to +175 °C * Non-repetitive current pulse per fig. 3 and derated above TA=25°C per fig 2. ** Mounted on Copper Leaf area of 1.57 in²., (40mm²) *** 8.3ms single half sine-wave, duty cycle=4 pulses per minute max. ****Add “C” suffix for bipolar types. HOW TO MAKE A PART NUMBER See charts on pages 34 & 35 for further detail. P4KE 12A R 1 2 3 1 - Series Code from Maximum Reverse Current column 2 - Break Down Voltage Code from Break Down Voltage Code column 3 - Packaging A - Tape & Ammo R - Tape & Reel Omit for bulk packaging. RFE International • Tel:(949) 833-1988 • Fax:(949) 833-1788 • E-Mail [email protected] C5DC01 REV 2001