MMIC AP222 Product Features • 50 ~ 3000 MHz • GaAs MMIC • 43dBm Output IP3 • 13dB Gain • 26dBm P1dB • Single +9V Supply Application • CDMA,W-CDMA Medium Power Amplifier • High Linearity Drive Amplifier Package : SOIC-8 Description AP222 is a high linearity amplifier designed with GaAs MMIC. AP222 is designed for applications such as GSM, CDMA, WCDMA driver devices which require high IP3 ELECTRICAL CHARACTERISTICS Absolute Minimum and Maximum Ratings PARAMETER UINT Device Voltage VDC +12 RF Input Power dBm +15 Storage Temperature ℃ MIN MAX -40 +150 Operating Ranges PARAMETER UNIT MIN Operating Frequency MHz 50 Device Voltage VDC Case Temperature ℃ TYP MAX 3000 +9 -40 +10 +100 Electrical Specifications (Ta=+25℃, VDD=+9V, Fc=900MHz) PARAMETER UNIT MIN TYP Gain dB 12 13 Input Return Loss dB -20 Output Return Loss dB -20 Output IP3 dBm 1dB Compression Point dBm +26 Noise Figure dB 2.8 DC Current mA 240 Supply Voltage VDC +9 Thermal Resistance(Rth) ℃/W +38 MAX +43 20 OIP3 is measured with two tones, at an output power of 10dBm/tone separated by 1MHz ▪ Tel : 82-31-250-5011 ▪ All specifications may change without notice. ▪ [email protected] ▪ Version 5.3 MMIC AP222 Application Circuit (900MHz) S-Parameter vs. Frequency OIP3 vs. Frequency 55 21 50 7 OI P3(d B m) M ag ni tud e(d B ) 14 0 -7 -14 45 40 35 -21 30 -28 -35 800 840 880 920 960 25 800 1000 840 920 960 1000 P1dB vs. Frequency 5 27 4 26 P1d B (d B m) N o i s e F i g ur e(d B ) Noise Figure vs. Frequency 3 25 24 2 1 800 880 F r e q u e n c y (M Hz ) F r e q u e n c y (MHz ) 840 880 920 F r e q u e n c y (MHz ) 960 1000 23 800 840 880 920 960 1000 F r e q u e n c y (M Hz ) ▪ Tel : 82-31-250-5011 ▪ All specifications may change without notice. ▪ [email protected] ▪ Version 5.3 MMIC AP222 Application Circuit (1800MHz) S-Parameter vs. Frequency OIP3 vs. Frequency 21 50 45 7 OI P3(d B m) M ag ni tud e(d B ) 14 0 -7 -14 40 35 30 -21 25 -28 -35 1700 1740 1780 1820 1860 20 1700 1900 F r e q u e n c y (MHz ) 1820 1860 1900 P1dB vs. Frequency 27 6 5 P1d B (d B m) N o i s e F i g ur e(d B ) 1780 F r e q u e n c y (MHz ) Noise Figure vs. Frequency 4 26 25 24 3 2 1700 1740 1740 1780 1820 F r e q u e n c y (M Hz ) 1860 1900 23 1700 1740 1780 1820 1860 1900 F r e q u e n c y (M Hz ) ▪ Tel : 82-31-250-5011 ▪ All specifications may change without notice. ▪ [email protected] ▪ Version 5.3 MMIC AP222 Application Circuit (2100MHz) S-Parameter vs. Frequency 16 OIP3 vs. Frequency S-Parameter vs.Frequency Frequency Noise Figure vs. 55 50 OI P3(d B m) M ag ni tud e(d B ) 8 0 -8 -16 -24 45 40 35 30 -32 1900 1960 2020 2080 2140 25 1900 2200 F r e q u e n c y (MHz ) 2020 2080 2140 2200 F r e q u e n c y (M Hz ) Noise Figure vs. Frequency P1dB vs. Frequency 6 30 28 5 P1d B (d B m) N o i s e F i g ur e(d B ) 1960 4 26 24 3 22 2 1900 20 1900 1960 2020 2080 F r e q u e n c y (MH z ) 2140 2200 1960 2020 2080 2140 2200 F r e q u e n c y (M Hz ) ▪ Tel : 82-31-250-5011 ▪ All specifications may change without notice. ▪ [email protected] ▪ Version 5.3 MMIC AP222 Pin Description 1 2 3 4 8 AMP2 AMP1 7 Pin No Function 1 RF IN(2) 5 RF OUT(1) 4 RF IN(1) 8 RF OUT(2) 2, 3, 6, 7 N.C Exposed slug GND 6 5 Package Dimensions (Type: SOIC-8) Recommended Pattern RFHIC Corporation (RFHIC) reserves the right to make changes to any products herein or to discontinue any product at any time without notice. RFHIC do not assume any liability for the suitability of its products for any particular purpose, and disclaims any and all liability, including without limitation consequential or incidental damages. The product specifications herein expressed have been carefully checked and are assumed to be reliable. However, RFHIC disclaims liability for inaccuracies and strongly recommends buyers to verify that the information they are using is current before placing purchase orders. RFHIC products are not intended for use in life support equipment or application where malfunction of the product can be expected to result in personal injury or death. Buyer uses or sells such products for any such unintended or unauthorized application, buyer shall indemnify, protect and hold RFHIC and its directors, officers, stockholders, employees, representatives and distributors harmless against any and all claims arising out of such use. RFHIC’s liability under or arising out of damages, claims of whatsoever kind and nature which RFHIC products could cause shall be limited in amount to the net purchase price of the products sold to buyer by RFHIC. ▪ Tel : 82-31-250-5011 ▪ All specifications may change without notice. ▪ [email protected] ▪ Version 5.3