CGR-0118Z CGR-0118Z Dual CATV 5MHz to 65MHz CATV Amp IC DUAL CATV 5MHz to 65MHz CATV AMP IC Package: SOIC 8 Product Description Features RFMD’s CGR-0118Z is a high performance 75Ω push-pull InGaP HBT MMIC amplifier utilizing a Darlington configuration with an active bias network. The active bias netwrok provides stable current over temperature and process variations. Designed to run over a wide range of supply voltage, from 5V to 12V, the CGR-0118Z does not require a bias resistor as compared to typical Darlington amplifiers. The CGR-0118Z is designed for 75Ω return path applications where linear performance is needed over the frequency range 5MHz to 65MHz. Optimum Technology Matching® Applied GaAs HBT 9 Amplifier Configuration GaAs MESFET InGaP HBT SiGe BiCMOS 1 8 2 7 3 6 4 5 Applications Si BiCMOS SiGe HBT GaAs pHEMT Si CMOS Flat Gain Response: 25.4 ± 0.3dB Excellent OIP3: 37.5dBm Superior Return Loss: >20dB Extremely Low CSO/CTB: -80/-67dBc Low Noise Figure: 3.0dB Single Supply: 5V to 12V Low DC Current: 130mA CATV Return Path Amplifier CATV Line Amplifier Optical RX/TX Si BJT GaN HEMT InP HBT RF MEMS LDMOS Parameter Min. Specification Typ. Max. Unit Condition 5MHz to 65MHz 5MHz to 65MHz 5MHz to 65MHz 5MHz to 65MHz 5MHz to 65MHz T7-T13 50dBmV/Channel T7-T13 50dBmV/Channel T7-T13 50dBmV/Channel 65MHz 5MHz, 65MHz (5dBm/tone at output, 1MHz spacing) Electrical Characteristics VCC =12V, TA =25°C, 75Ω System Gain Gain Slope Input Return Loss Output Return Loss Noise Figure Composite Triple Beat Cross Modulation Composite Second Order 1dB Gain Compression Point Output 3rd Order Intercept Point 25.4 ±0.3 20 20 3 -60 -63 -80 73.5 37.5 dB dB dB dB dBc dBc dBc dBc dBmV dBm Supply Voltage Operating Current 12 130 V mA RF MICRO DEVICES®, RFMD®, Optimum Technology Matching®, Enabling Wireless Connectivity™, PowerStar®, POLARIS™ TOTAL RADIO™ and UltimateBlue™ are trademarks of RFMD, LLC. BLUETOOTH is a trademark owned by Bluetooth SIG, Inc., U.S.A. and licensed for use by RFMD. All other trade names, trademarks and registered trademarks are the property of their respective owners. ©2006, RF Micro Devices, Inc. Prelim DS090922 7628 Thorndike Road, Greensboro, NC 27409-9421 · For sales or technical support, contact RFMD at (+1) 336-678-5570 or [email protected]. 1 of 14 CGR-0118Z Absolute Maximum Ratings Parameter Rating Unit DC Supply (VCC) 14 VDC RF Input Voltage (Single Tone) (VIN) 65 dBmV Operating Case Temperature Range (TC) -40 to +100 °C Storage Temperature Range (TSTG) -40 to +150 °C +24 dBmV RF Input (RFIN) Operation of this device beyond any one of these limits may cause permanent damage. For reliable continuous operation, the device voltage and current must not exceed the maximum operating values specified in the table on page one. Parameter Min. Specification Typ. Max. Caution! ESD sensitive device. Exceeding any one or a combination of the Absolute Maximum Rating conditions may cause permanent damage to the device. Extended application of Absolute Maximum Rating conditions to the device may reduce device reliability. Specified typical performance or functional operation of the device under Absolute Maximum Rating conditions is not implied. RoHS status based on EUDirective2002/95/EC (at time of this document revision). The information in this publication is believed to be accurate and reliable. However, no responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any infringement of patents, or other rights of third parties, resulting from its use. No license is granted by implication or otherwise under any patent or patent rights of RFMD. RFMD reserves the right to change component circuitry, recommended application circuitry and specifications at any time without prior notice. Unit Condition 5MHz to 65MHz 5MHz to 65MHz 5MHz to 65MHz 5MHz to 65MHz 5MHz to 65MHz T7-T13 50dBmV/Channel T7-T13 50dBmV/Channel T7-T13 50dBmV/Channel 65MHz 5MHz, 65MHz (5dBm/tone at output, 1MHz spacing) Electrical Characteristics VCC =8V, TA =25°C, 75Ω System Gain Gain Slope Input Return Loss Output Return Loss Noise Figure Composite Triple Beat Cross Modulation Composite Second Order 1dB Gain Compression Point Output 3rd Order Intercept Point 25.4 ±0.3 20 20 3 -67 -63 -80 73.5 37.5 dB dB dB dB dBc dBc dBc dBc dBmV dBm Supply Voltage Operating Current 5V Specification Table 8 130 V mA Gain Gain Slope Input Return Loss Output Return Loss Noise Figure Composite Triple Beat Cross Modulation Composite Second Order 1dB Gain Compression Point Output 3rd Order Intercept Point 25.4 ±0.3 20 20 2.7 -60 -63 -80 74 40 dB dB dB dB dBc dBc dBc dBc dBmV dBm Supply Voltage Operating Current 5 262 V mA 2 of 14 VCC =5V, TA =25°C, 75Ω System 5MHz to 65MHz 5MHz to 65MHz 5MHz to 65MHz 5MHz to 65MHz 5MHz to 65MHz T7-T13 50dBmV/Channel T7-T13 50dBmV/Channel T7-T13 50dBmV/Channel 65MHz 5MHz, 65MHz (5dBm/tone at output, 1MHz spacing) 7628 Thorndike Road, Greensboro, NC 27409-9421 · For sales or technical support, contact RFMD at (+1) 336-678-5570 or [email protected]. Prelim DS090922 CGR-0118Z Typical Performance Curves (TA =25°C) Input Return Loss VDD=12V Output Return Loss VDD=8V dB 0 0 -5 -5 -10 -10 -15 -15 -20 -20 dB -25 -25 -30 -30 -35 -35 -40 -40 -45 -45 -50 -50 0 10 20 30 40 50 60 0 70 10 20 30 40 50 Frequency Frequency Output Return Loss VDD=12V Noise Figure VDD=12V 60 70 5.0 0 4.5 -5 4.0 -10 3.5 -15 dB 3.0 dB -20 2.5 2.0 -25 1.5 -30 1.0 -35 0.5 0.0 -40 0 10 20 30 40 50 60 0 70 20 30 40 50 Frequency CSO VDD=12V CTB VDD=12V 100 100 90 90 80 80 70 70 60 70 80 60 60 dBc 10 Frequency dBc 50 50 40 40 30 30 20 20 10 10 0 0 0 10 20 30 Frequency Prelim DS090922 40 50 60 0 10 20 30 40 50 60 Frequency 7628 Thorndike Road, Greensboro, NC 27409-9421 · For sales or technical support, contact RFMD at (+1) 336-678-5570 or [email protected]. 3 of 14 CGR-0118Z Typical Performance Curves (TA=25°C) Input Return Loss VDD=8V XMOD VDD=12V 100 0 90 -5 80 -10 70 -15 60 dBc dB 50 40 -20 -25 30 -30 20 -35 10 -40 0 0 10 20 30 40 50 0 60 10 20 30 40 50 Frequency Frequency Gain VDD=8V Output Return Loss VDD=8V 60 70 60 70 0 30 -5 25 -10 -15 20 -20 dB dB 15 -25 -30 10 -35 -40 5 -45 -50 0 0 10 20 30 40 50 60 0 70 10 20 30 5.0 100 4.5 90 4.0 80 3.5 70 60 3.0 dBc 2.5 50 2.0 40 1.5 30 1.0 20 0.5 10 0 0.0 0 10 20 30 40 Frequency 4 of 14 50 CSO VDD=8V Noise Figure VDD=8V dB 40 Frequency Frequency 50 60 70 80 0 10 20 30 40 50 60 Frequency 7628 Thorndike Road, Greensboro, NC 27409-9421 · For sales or technical support, contact RFMD at (+1) 336-678-5570 or [email protected]. Prelim DS090922 CGR-0118Z Typical Performance Curves (TA=25°C) XMOD VDD=8V CTB VDD=8V 100 100 90 90 80 80 70 70 60 60 dBc dBc 50 50 40 40 30 30 20 20 10 10 0 0 0 10 20 30 40 50 0 60 10 20 30 40 50 60 Frequency Frequency Gain VDD=5V Input Return Loss VDD=5V 30 0 -5 25 -10 -15 20 -20 dB dB 15 -25 -30 10 -35 -40 5 -45 0 -50 0 10 20 30 40 50 60 70 0 10 20 Frequency Output Return Loss VDD=5V 40 50 60 70 60 70 Noise Figure VDD=5V 0 5.0 -5 4.5 -10 4.0 -15 3.5 -20 dB 30 Frequency 3.0 -25 dB 2.5 -30 2.0 -35 1.5 -40 1.0 -45 0.5 -50 0.0 0 10 20 30 40 Frequency Prelim DS090922 50 60 70 0 10 20 30 40 50 Frequency 7628 Thorndike Road, Greensboro, NC 27409-9421 · For sales or technical support, contact RFMD at (+1) 336-678-5570 or [email protected]. 5 of 14 CGR-0118Z Typical Performance Curves (TA=25°C) CSO VDD=5V CTB VDD=5V 100 100 90 90 80 80 70 70 60 dB 60 dB 50 50 40 40 30 30 20 20 10 10 0 0 0 5 10 15 20 25 30 35 40 45 50 Frequency 0 5 10 15 20 25 30 35 40 45 50 Frequency XMOD VDD=5V 100 90 80 70 60 dB 50 40 30 20 10 0 0 5 10 15 20 25 30 35 40 45 50 Frequency 6 of 14 7628 Thorndike Road, Greensboro, NC 27409-9421 · For sales or technical support, contact RFMD at (+1) 336-678-5570 or [email protected]. Prelim DS090922 CGR-0118Z Pin 1 2 3 4 5 6,7 8 EPAD Function RFFB RFIN RFIN RFFB RFOUT BYPASS RFOUT GND Prelim DS090922 Description Feedback pin. External DC-blocking capacitor is required. RF input pin. External DC-blocking capacitor is required. Same as pin 2. Same as pin 1. RF output and bias pin (open collector). AC ground/Bypass. Same as pin 5. Exposed area on the bottom side of the package must be soldered to the ground plane of hte board for optimum thermal and RF performance. Several vias should be located under the EPAD as shown in the recommended land pattern. 7628 Thorndike Road, Greensboro, NC 27409-9421 · For sales or technical support, contact RFMD at (+1) 336-678-5570 or [email protected]. 7 of 14 CGR-0118Z Pin Assignment C+ OUT+ IN+ BYPASS IN- BYPASS C- OUT- Outline Dimensions D 3 E 3 SYMBOL X 0.010 Gauge Plane PIN NO.1 ID MARK Seating Plane T e B L TOP VIEW DETAIL "A" "A" 0.015±0.004 x45° A A1 A1 B MIN 0.054 0.001 0.014 MAX 0.068 0.004 0.019 D E 0.189 0.150 0.196 0.157 A H 0.229 0.244 0.050 BSC e C 0.0075 0.0098 L C T 8 SOIC 0.020 0.040 X 0.0215 REF T T 0° 7° 8° BSC H 0.130 Ref. NOTE : 1. TOP PACKAGE SURFACE TO BE MATTE FINISH VDI 24~27. 2. BOTTOM PACKAGE SURFACE TO BE MATTE FINISH VDI 8~11. 0.095 Ref. 3. DIMENSION ARE EXCLUSIVE MOLD FLASH AND GATE BURR. 4. FOOT LENGTH MEASURING IS BASED ON THE GAUGE PLANE METHOD. BOTTOM VIEW EXPOSED PADDLE 8 of 14 7628 Thorndike Road, Greensboro, NC 27409-9421 · For sales or technical support, contact RFMD at (+1) 336-678-5570 or [email protected]. Prelim DS090922 CGR-0118Z 12V Application Schematic JP2 VDD C7 1 uF JP1 GND J1 IN C8 0.1 uF C6 10 uF L1 10 uH C1 3.3 pF T1 XFM-0201-1WH C2 1 uF C3 1 uF C4 1 uF C5 1 uF R2 100 Ω 1 8 2 7 3 R1 100 Ω U1 CGR-0118Z 4 C12 1 uF T2 XFM-0201-1WH C14 2 pF L2 10 uH 6 C11 10 uF C9 0.1 uF J2 OUT C10 2 pF 5 C3 1 uF 8V Application Schematic JP2 VDD C10 10 uF JP1 GND J1 IN C9 1 uF C8 0.1 uF C2 0.1 uF R1 2.7 kΩ T1 XFM-0201-1WH C3 1 uF C4 1 uF C6 1 uF R2 2.7 kΩ R3 100 Ω 1 2 3 R4 100 Ω 4 C15 1 uF T2 XFM-0201-WH 8 CGR-0118Z C1 3.3 pF C7 1 uF L1 10 uH C16 2 pF 7 6 L3 10 uH C11 0.1 uF C12 2 pF J2 OUT C13 10 uF 5 C14 1 uF C5 0.1 uF Prelim DS090922 7628 Thorndike Road, Greensboro, NC 27409-9421 · For sales or technical support, contact RFMD at (+1) 336-678-5570 or [email protected]. 9 of 14 CGR-0118Z 5V Application Schematic JP2 VDD C10 10 uF JP1 GND J1 IN C9 1 uF C8 0.1 uF C2 0.1 uF R1 10 kΩ T1 XFM-0201-1WH C7 1 uF C4 1 uF C6 1 uF R2 10 kΩ R3 100 Ω 1 2 3 R4 100 Ω 4 C15 1 uF 8 CGR-0118Z C1 3.3 pF C3 1 uF L1 10 uH C16 2 pF 7 6 J2 OUT C14 1 uF 5 L2 10 uH C5 0.1 uF 10 of 14 T2 XFM-0201-WH 7628 Thorndike Road, Greensboro, NC 27409-9421 · For sales or technical support, contact RFMD at (+1) 336-678-5570 or [email protected]. JP3 VDD Prelim DS090922 CGR-0118Z 12V Evaluation Board Layout Value 2pF 3.3pF 0.1uF 1uF 10uF 100 Ohms 10uH (1008 PS-103 KLB) RFMD™ XFM-0201-1WH Prelim DS090922 Qty. 2 1 2 7 2 2 2 2 Location C10, C14 C1 C8, C9 C2, C3, C4, C5, C7, C12, C13 C6, C11 R1, R2 L1, L2 T1, T2 7628 Thorndike Road, Greensboro, NC 27409-9421 · For sales or technical support, contact RFMD at (+1) 336-678-5570 or [email protected]. 11 of 14 CGR-0118Z 8V Evaluation Board Layout Value 2pF 3.3pF 0.1uF 1uF 10uF 2.7 k Ohms 100 Ohms 10uH (1008 PS-103 KLB) RFMD™ XFM-0201-1WH 12 of 14 Qty. 2 1 4 7 2 2 2 2 2 Location C12, C16 C1 C2, C5, C8, C11 C3, C4, C6, C7, C9, C14, C15 C10, C13 R1, R2 R3, R4 L1, L2 T1, T2 7628 Thorndike Road, Greensboro, NC 27409-9421 · For sales or technical support, contact RFMD at (+1) 336-678-5570 or [email protected]. Prelim DS090922 CGR-0118Z 5V Evaluation Board Layout Value Qty. Location 2pF 1 C16 3.3pF 1 C1 0.1uF 3 C2, C5, C8 1uF 7 C3, C4, C6, C7, C9, C14, C15 10uF 1 C10 10 k Ohms 2 R1, R2 100 Ohms 2 R3, R4 10uH (1008 PS-103 KLB) 2 L1, L2 RFMD™ XFM-0201-1WH 2 T1, T2 Prelim DS090922 7628 Thorndike Road, Greensboro, NC 27409-9421 · For sales or technical support, contact RFMD at (+1) 336-678-5570 or [email protected]. 13 of 14 CGR-0118Z Ordering Information 14 of 14 Part Number Description Reel Size (in) Devices/Reel CGR-0118ZSB CGR-0118ZSQ CGR-0118ZSR CGR-0118ZTR7 CGR-0118ZTR13 CGR-0118ZPCBA-410 CGR-0118ZPCBA-411 CGR-0118ZPCBA-412 5pcs Sample Bag 25pcs Sample Bag Lead Free, RoHS Compliant Lead Free, RoHS Compliant Lead Free, RoHS Compliant 5MHz to 65MHz 12V Evaluation Board 5MHz to 65MHz 8V Evaluation Board 5MHz to 65MHz 5V Evaluation Board N/A N/A 7 7 13 N/A N/A N/A N/A N/A 100 750 2500 N/A N/A N/A 7628 Thorndike Road, Greensboro, NC 27409-9421 · For sales or technical support, contact RFMD at (+1) 336-678-5570 or [email protected]. Prelim DS090922