Schematic Diagram Surface Mount Inductor 1 4 2 3 Toroid Mount meets UL94VO Designed for IR and Vapor Phase Reflow The Inductor is a dual winding and can be used as a dual inductor, single inductor, or a transformer. Single inductors can be wired in series for high inductance values or wired in parallel for less inductance but twice the current capacity. As a 1:1 transformer, it can provide a minimum of 500 volts isolation with good frequency response. For series operation Connect 2 & 4 For parallel operation Connect 1 & 4 and 2 & 3 Electrical Specifications at 25o C Part Number --- Parallel Ratings --L DCR I + 20% Max. Max. ( µH ) ( mΩ ) ADC --- Series Ratings --L DCR I + 20% Max. Max. ( µH ) ( mΩ ) ADC L-15804 4.83 19.31 41 2.0 161 1.0 Physical Dimensions in inches (mm) .400 (10.16) .350 (8.90) .283 (7.19) .050 (1.27) FOOTPRINT .465 (11.81) .400 (10.16) .198 (5.02) .040 (1.01) .015 (.38) RHOMBUS P/N: L-15804 CUST P/N: DATE: 1/30/00 NAME: SHEET: 1 OF 1 15801 Chemical Lane, Huntington Beach, CA 92649 Phone: (714) 898-0960 FAX: (714) 896-0971 Rhombus Industries Inc. Transformers & Magnetic Products www.rhombus-ind.com