RHOPOINT 1776-C67

Page 2 of 2
Type MG Precision High Voltage Resistors
Type MG Precision High Voltage Resistors
Type
1776
Precision
Decade
Resistor
Voltage
Dividers
Type
1776
Precision
Decade
Resistor
Voltage
Dividers
Type
MG
Precision
High
Voltage
Resistors
Type
1776
Precision
Decade
Resistor
Voltage
Type
MG
Precision
High
Voltage
Resistors
Type 1776 Precision Decade Resistor Voltage Dividers
Dividers
Page 1 of 2
Type MG Precision High Voltage Resistors
Page11 of
of 22
Page
Page 1
1 of
of 2
Page
2
Page
Page21 of
of 22
Input
Voltage
Dividers
for
Digital
Multimeters
and
Range-Switching
Instruments
Now
with Extended
Resistance
Range
to 10,000
Megohms
and Additional
Models
Input
Voltage
Dividers
and
Instruments
Input
Voltage
Dividersfor
forDigital
DigitalMultimeters
Multimeters
andRange-Switching
Range-Switching
Instruments
Now
with
Extended
Resistance
Range
to
10,000
Megohms
and
Additional
Models
Temperature
Coefficient
as
tight
as
80
ppm/°C,
Combined
with
Excellent
Long-Term
Stability,
and
Precision
Tolerances.
Input Voltage Dividers
for Digital
Multimeters
andatat
Range-Switching
Instruments
Introducing
New
Smaller
Models
Lower
Cost
Introducing
New
Smaller
Models
Lower
Cost
Introducing
New
Smaller
Models
at
Lower
Cost
Page 1 of 2
Temperature Coefﬁcient as tight
as 80 ppm/°C,New
Combined
with Excellent at
Long-Term
Stability and Precision Tolerances.
Introducing
Smaller
Lower
Cost
Caddock's Micronox®
resistance
films
are the source
of the Models
Preconditioning
and Voltage
exceptional
performance
this
extensive
family
Thereare
are now
nowfor
39Power
standard
modelsRatings
in the
the expanded
expanded
TheThe
exceptional
performance
of ofthis
extensive
family
ofof
There
39
standard
models
in
MG 650
The
exceptional
performance
ofﬁlms
this are
extensive
family
There
are now
39and
standard
models
in voltage
the expanded
® resistance
Type
MG
Precision
HighResistor
Voltage
Resistors'
outstanding
All power
ratings
maximum
operating
ratings are
Caddock's
Micronox
theDividers
source
ofof
Preconditioning
for precision
Power
and
Voltage
Ratings
Type
1776
Precision
Decade
Voltage
has
familyofof
Type1776
1776
resistor
networks
that include:
include:
Type
1776
Precision
Decade
Resistor
Voltage
Dividers
has
family
Type
precision
resistor
networks
that
The
exceptional
performance
of Resistors'
this
extensive
family
of
combination
of Extended
performance
features:
Type
1776
Precision
Decade
Resistor
Voltage
Dividers
has
for
continuous
duty.
These
ratings
are based
pre-stress
There
are
now
39
standard
models
in voltage
the
family
of
Type
1776
precision
resistor
networks
thatonexpanded
include:
MG
655
Now
with
Resistance
Range
to
10,000
Megohms
and
Additional
Models
thebeen
Type
MG
Precision
High
Voltage
outstanding
All
power
ratings
and
maximum
operating
ratings
achieved
through
the
special
been
achieved
through
the
special
voltage
levels
applied
during
the
manufacturing
process
Type
1776
Precision
Decade
Resistor
Voltage
Dividers
has
been
achieved
through
the
special
family
of
Type
1776
precision
resistor
networks
that
include:
•
3,
4,
and
5
decade
voltage
•
Single-resistor
values
as
high
as
10,000
Megohms.
are
for
continuous
duty.
These
ratings
are
based
on pre-to
combination
of
performance
features:
MG
660
•
3,
4,
and
5
decade
voltage
c
o
m
b
i
n
a
t
i
o
n
o
f
a
d
v
a
n
t
a
g
e
s
Temperature
Coefﬁcient
as
tight
as
80
ppm/°C,
Combined
with
Excellent
Long-Term
Stability
and
Precision
Tolerances.
•
3,
4,
and
5
decade
voltage
provide for stable resistor performance
under
c o cbeen
mobmi nbachieved
ant iaotni o no through
f o fa davdathe
aspecial
vnatoperating
n
tgaegse s® voltages
dividers
witheven
ratios
from momentary
10:1 to
to
stress
voltage levels applied
the
manufacturing
V
• iMaximum
continuous
as high as
with
from
10:1
• Single-resistor
values
as high
as®10,000
provided
by
Caddock's
Tetrinox
V V Megohms.
•dividers
3,
4,during
and
5 -ratios
decade
voltage
dividers
with
ratios
from
10:1 to
overload conditions.
provided
9M
cMG
o680
m b i48,000
nby
a by
t iCaddock's
oMicronox
nvolts
o f("-15"
a®dTetrinox
vresistance
aTetrinox
n t a g e s® ﬁlms
provided
Caddock's
Caddock's
the
source
of
Preconditioning
for
Power
and
Voltage
Ratings
10,000:1.
process
to
provide
for
stable
resistor
performance
even
V
Ratings).
9Mare
9M high
10,000:1.
Maximum
operating
voltages
60%
higher
than
the
values
resistance
ﬁ
lms.
This
advanced
=
V
V
•resistance
Maximum
continuous
operating
voltages
as
as
dividers
with
ratios
from
10:1
to
10,000:1.
V
®
MG 710
V
10 = V= V1 1
ﬁby
lms.
This
provided
Caddock's
Tetrinox
resistance
ﬁPrecision
lms.
Thisadvanced
advanced
the
Type
MG
High
Voltage
All
power
andbe
maximum
operating
voltage
ratings
under
momentary
overload
conditions.
900K
10outstanding
1
10
• volts
Overvoltage
capabilities
of 150% Resistors'
of900K
standard
working
listed
in theratings
table
may
specified
by adding
"-15"
to
the
model
9M
film
resistor
technology
provides
48,000
("-15"
ratings).
10,000:1.
•
1,200
volts
continuous
ratings
900K
VV
=
V
V
film
resistor
technology
provides
V
•These
volts
continuous
ratings
resistance
This
advanced
= V 21
film
technology
provides
MG 712resistor
are Maximum
for continuous
duty.voltages
ratings
are
based
on
pre100
ofﬁlms.
performance
features:
operating
60%
higher
than
the
values
•1,200
1,200
volts
continuous
ratings
V=
voltages
for all
models
and values,
(except
"-15"
number
(Example:
MG750-15).
Note
that
overload
and
V2 2
10 = ratings).
90K working
100100
the
performance
characteristics
•combination
Overvoltage
capabilities
of provides
150%
of standard
andovervoltage
overvoltage
tomanufacturing
2,000
volts.
900K
V
90K
the
performance
characteristics
90K
film
resistor
technology
and
to
2,000
volts.
the
performance
characteristics
=
stress
voltage
levels
applied
during
the
listed
in
the
table
may
be
speciﬁed
by
adding
"-15"
to
the
V VV
•
1,200
volts
continuous
ratings
and
overvoltage
to
2,000
volts.
overvoltage
ratings
do
not
apply
to
the
"-15"
resistors.
=V
V 32
• voltages
Single-resistor
values
as
high
as
10,000
Megohms.
1,000
=
V
•
Resistance
Tolerances
from
±1.0%
to
±0.1%.
required
precision
input (except90K
= V3 3
forby
allthe
models
and values,
ratings).
100
MG 714
9K"-15"
1,000
1,000
required
by
the
precision
input
process
to provide
for "-15"
stable
resistor
performance
even
Resistance
ranges
for
resistors
shown
intothe
are
from
the
performance
characteristics
required
by
the
precision
input
model
number
(Example:
Note
that
overload
9K 9K
and
overvoltage
2,000
volts.
••Many
Many
combinations
oftable
Ratio
and
VV
=V
Maximum
continuous
operating
as
highV10,000
as
V =range,
V 4
signal
circuits
of
both
bench-type
•MG750-15).
combinations
of
and
• Temperature
Coefficient,
forvoltages
standard
resistance
Many
combinations
of Ratio
Ratio
and
V=
= V4 43 of
•• Resistance
Tolerances
from
±1.0%
to
±0.1%.
1,000
"-15
Min." to "Standard
Max."
1K
signal
circuits
of
both
bench-type
under
momentary
overload
conditions.
required
by
the
precision
input
and
overvoltage
ratings
do
not
apply
to the "-15"
resistors.
signal
circuits
of
both
bench-type
10,000
10,000
Absolute
Tolerance,
and
Ratio
9K
MG 715 80
1K
48,000
volts
("-15"
ratings).
1K
V
in
combination
with
resistance
tolerances
as
ppm/°C
and
laboratory
digital
instruments.
Tolerance,
and
Ratio
•Absolute
Many
combinations
of
Ratio
and
Absolute
Tolerance,
and
Ratio
= V of
• Temperature
Coefﬁcient,
for standard resistance range,
forMaximum
operating
voltages
higher
than
the
values
4Schematic
and
laboratory
digital
instruments.
ranges
for "-15"
resistors
shown
in
the
table
are
signal
circuits
of both
bench-type
and
laboratory
digital
instruments.
10,000
and 60%
Absolute
Temperature
±0.1%.
tight
as
Schematic
for
SchematicResistance
for Non-Inductive
1K working
• 80
Overvoltage
of with
150%
of standard
and
Absolute
Temperature
Absolute
Tolerance,
and
Ratio
Performance
and
Absolute
Temperature
MG ppm/°C
716
Model 1776-C68
incapabilities
combination
resistance
tolerances
as
listed
in
the
table
may
be
speciﬁed
by
adding
"-15"
to
the
Inlaboratory
addition
to requiring
less
from
"-15
Min."
to
"Standard
Max."
and
digital
instruments.
Coefﬁ
cient.
Model
1776-C68
Model
1776-C68
Schematic
for
In
addition
to
requiring
less
voltages
for
all
models
and
values,
(except
"-15"
ratings).
In
addition
to
requiring
less
• Typical
extended life stability of 0.02% per 1,000 hours
Most models
are MG750-15).
manufactured
with
Caddock's
NonCoefﬁ
cient.
and Absolute
Temperature
Coefﬁ
cient. Note
tight
as
±0.1%.
model number
(Example:
that
overload
board
space,
these
compact
MG 720
Non-Inductive
Performance
Model
1776-C68
for
standard
resistance
range
demonstrated
by
Inductive DesignNon-inductive
which uses
a serpentine
resistive pattern that
Insion
addition
tothese
requiring
lessas
board
space,
these
compact
board
space,
compact
Coefﬁ
cient.to price
Resistance
Tolerances
±1.0%
to
±0.1%.
performance
ForMost
complete
information
on
quantity
and
delivery,
and
overvoltage
ratings
do
not
apply
the
"-15"
resistors.
pre
ci
resistor
networks
deliver
higher
performance
•• Type
MG
resistors
havefrom
demonstrated
stability
of 0.01% than
models
manufactured
with
Caddock's
withare
Caddock's
exclusive
design
reliability
testing.
provides
for
neighboring
lines
to carry
current
in
opposite
Forcomplete
complete
information
on
quantity
price
and
delivery,
For
information
on
quantity
price
and
delivery,
pre
cision
resistor
networks
deliverhigher
higher
performance
pre
cision
resistor
networks
deliver
performance
board
these
compact
MG 725
• per
Temperature
Coefﬁcient,
for
standard
resistance
range,than
ofthan
Resistance
ranges
for
"-15"
resistors
shown
in the oftable
are
contact
our
Sales
Ofﬁ
ce.
selected
discrete
resistor
sets
and thin-ﬁ
lm networks.
1,000space,
hours
in
extended
load
life testing
of standard
Non-Inductive
Design
which
uses
a
serpentine
resistive
directions,
thereby
achieving
maximum
cancellation
flux fields
For complete
information
on quantity price and delivery,
contact
our
Sales
Ofﬁ
ce.
preppm/°C
cision
resistor
networks
deliver
higher
performance
than
selected
discrete
resistor
sets
and
thin-ﬁ
lm
networks.
our
Sales
Ofﬁ
ce.
selected
discrete
resistor
sets
and
thin-ﬁ
lm
networks.
This
exceptional
performance
has
been proven
through contact
80
in
combination
with
resistance
tolerances
as
fromover
"-15
Min."
toRatio
"Standard
Max."
resistance
range
values.
the
entire
length
of
the
resistor.
This
efficient
non-inductive
pattern
that
provides
for
neighboring
lines
to
carry
current
in
Stability
many
years
of use
in equipment
thatnetworks.
demands
the highestRatiocontact
our
Sales
Ofﬁ
ce.
Voltage
selected
discrete
resistor
sets
and thin-ﬁlm
MG 717as
Resistance
Values
TC
Ratio
Absolute
tight
±0.1%.
Ratio
Stability
%
Change
in Ratio
Ratio
Voltage
Coef.
construction
isStability
accomplished
without
derating
of any
This
exceptional
performance
has
been
proven
through
Non-Inductive
Performance
Resistance
Valuesincluding
Model
Voltage
directions,
thereby
achieving
maximum
cancellation
Resistance
Values
Most
models
are
available
with
TC Voltage
Ratio
Ratio
Absolute Ratio
Temp.
Tolerance
Tolerance
TCopposite
reliability
and
stability,
TWT
amplifiers,
X-ray
systems,
Abs. TCRatio
TC
Absolute
%
Change
in
Ratio
%
Change
in
Ratio
ofCoef.
Ratio Load Shelf OverCoef.
Model
Voltage
Fig.
No.MG resistors have demonstrated
Rating
Voltage
Temp.
Tolerance
Tolerance
TC Temp.
Range
% Abs.
%ofTolerance
ppm/�C
Abs.
ppm/�C
Speciﬁ
cations:
Ratio are
Stability manufactured
Tolerance
• Model
Type
stability
0.01%
performance
advantages.
TCTC TC
Voltage
of
Ratio over
ppm/volt
many
years
use
in Requipment
that
demands
the
highest
Most
models
with
Caddock's
of
Ratio
Resistance
of Range
ﬂux
ﬁelds
the
entire Speciﬁ
length
of
the
resistor.
This
Rating
No. No.
Rating
geophysical
medical
electronics
OverShelf
Load
Voltage
Life
Life
Caddock's
Non-inductive
Serpentine
Pattern
TC
Ratio
Absolute
Range
%
ppm/�C
7
1
Rof
R2instruments
3 Values
R4and R
5 Fig.Fig.
OverShelf
Load
ppm/�C
Speciﬁ
cations:
%
Change
in
Ratio
% % . %Ratio
ppm/�C
ppm/�C
cations:
1
2
2
Coef.
ppm/volt
ppm/volt
Voltage
3
MGModel
721
Voltage
Life
Life
Temp.
Tolerance
Tolerance
TC
7
4 Life
5 Voltage
1
R
R
2
R
3 R4 R4 load
R
5 life testing
6
Abs.
TC
per
1,000
hours
in
extended
of
standard
Life
7
1
R
R
2
R
3
R
5
1
2
2
of
Ratio
1
reliability
and stability, including TWT
amplifiers,
Non-Inductive
Design
which
uses
a
serpentine
resistive
2
2
efﬁcient
non-inductive
construction
is
accomplished
without
Fig. Rating
No.
OverShelf
Load
Range
%X-ray
%
4
5
6
3 3
ppm/�C ppm/�C
Speciﬁ
cations:
4
5
6
(
N
u
m
b
e
r
s
i
n
s
i
d
e
c
i
r
cles
ppm/volt Life Life Voltage
Range
1 that
7
1
Rrange
R2 values.
R3K
4
R5and10medical
resistance
90
9RK
900
1200
0.1
30
10
0.01 0.003
0.1
1
0.04
1776-C67 geophysical
900
K instruments,
9 Meg
(NNuumm
sto i carry
innssi iddeecurrent
2
2 derating
systems,
electronics.
pattern
for0.005
neighboring
lines
( reference
bbeerrscolumns
cciirrccllNo.
eeinss
of(millimeters)
any
performance
advantages.
3 provides
Range
4
5Specifications:
6
in Model
1200
30
0.01
0.003
0.005
Resistance
Range
1 1and0.04
0.04
1776-C679 Meg
K 90Max.
9 Meg900 900
inches
K90 K 9 K 9 K 900900 10 101200
0.1 0.1
30Dimensions
10 10 in
0.01
0.003
0.005
0.10.1
1776-C67
K
MG
730 Model
reference
Model
Range 1 directions,
( N u mmaximum
b ecolumns
rcolumns
s i n s icancellation
dineModel
c i r cNo.
lNo.
es
This
exceptional
proven
through
1776-C671
9 MegWatt900 Continuous
K performance
90 K
9Dielect.
K
900has
1200
0.1
0.05
30
10opposite
0.01 0.003
0.005 achieving
10 been
0.04
reference
in
thereby
Resistance
Tolerance:
Standard
Extended
table)
-15
Range
1
No.
age
Strength
A
B
C
90
K
9
K
900
1200
0.1
30
10
0.01
0.003
0.005
0.1
0.04
10
Range
1
1776-C67
900
K
9
Meg
1776-C671
0.05
Min.
1
1776-C671
9 Meg
900 K
90 K Volt.9 K
900
0.1
0.05
10
0.01 0.003 0.005
10 1200
0.04
Oper.
table)
Max. 30 30
Min.
reference
columns
in ModelThis
No.
table)
many
years
of
use
highest
Range
1 ﬁelds
ofRange
ﬂux
the
entire
length
of
the
resistor.
1776-C6715
9 Meg
900 K in 90equipment
K
9K
1200
0.1 the 0.05
0.01 0.003
0.005
900that
10 demands
0.04 over
ResistanceMax.
Dimensions5in
inches
and
(millimeters)
Speciﬁcations:
Max.
Resistance
Range
Tolerance
Range
1 0.04
1776-C671
10
1776-C6715
9 Meg900 900
K Dielect.
1200
5 Range
0.010.003
0.005
0.003
0.05
Model
Watt.0941 ±.015
101200
0.04
.025 ±.002
1776-C6715
9MG
Meg
K KOverload
90 K90
K 9 K 750
0.1 0.1
30 30 .3135±.020
0.01
0.005
900900200
0.05
10 Ω
table)
Continuous
2
3
4Tolerance:
5
6
7
1
.5
600K 9including
5 MegExtended
N/A
Ratio
Maximum
N/Aamplifiers,
reliability
and
X-ray
Standard
is
accomplished
without
Range
1 non-inductive
1776-C68
9650
Meg stability,
900 K Rating
30 (7.95
10efﬁcient
0.01 0.003 construction
90
9K
1Min.
K TWT
0.1
0.005
0.1
10 -151200
0.04
(2.39
No.
Strength
A ±.51)
B ±.38)
C ±.05)
MG
735age
(.64
2 33
4Tolerance:
1 2Ratio
Maximum
Volt.
Resistance
Range 1
Standard
±0.1%
1776-C6715
5 Range
0.05
66
5 5 ±0.5%,
4±1%,
77 ±0.25%,
1 Tolerance:
1776-C68
9Oper.
Meg900
900
1200
0.010.003
90 K 9 K 9 K 1 K 900
1 K 10 101200
0.1
0.005
0.1
0.04 0.01
0.003
Max.
Max.
Min.
Ratio
Tolerance:
Maximum
1
1776-C68
9 Meg
K K 90 K
30 30
10 10
0.1electronics.
0.005
0.1
0.04
ra
tio
error.
(See
the
specific
systems,
geophysical
instruments,
and
medical
.109 ±.025
any
performance
.025 ±.002
1 of0.04
Range
1776-C681MG9655
Meg
900 K
30 .313 ±.030
10derating
0.01 0.003 0.005 advantages.
90
K
9 K 750 1 K200 Ω
0.1
10 1200
.5
600
8 Meg 0.05
N/A
ra
tio
error.
(See
the
specific
N/A
2
3
4Tolerance:
5
6
7
1
Ratio
Maximum
.313 �.020 .094 �.015 .025 �.002
IN
IN
IN
IN
IN
IN
IN
IN
OUT
IN
IN
IN
IN
I N I NI N
IN
IN
IN
IN
IN
OUT
OUT
OUT
OUT
OUT OUT
OUT
OUT OUT
OUT
OUT
OUT
OUT OUT
OUT
New
(2.77 ±.64)
raFigures
tio error.
(See
theDeﬁ
specific
Resistance
Range
Tolerance
1776-C681
30 (7.95
10 Range
0.01 0.003
K
1 K � 10 N/A
0.1
0.04
0.05
Range
1 0.04
1776-C68
9 Meg600900
K 90
1200
901 K 9 K 9750
0.1
(.64 ±.05)
±.76)
St'd0.005
with "-15"
rating
±1%
for the
Ra
tio
nition).
0.5
200
5 Meg
N/A
Type
MG650
1 1
1776-C681
9 Meg
K K
30 30
0.01
K90
0.1
0.05
(2.39
�.38)
Range
1776-C6815
9 Meg900 900
K
9 K 1 K 1 K 10 101200
1200
0.003 0.005
0.005
0.04
0.05
0.1
5
0.010.003
�.51)
(7.95 10
(.64 �.05)
Figures
forthe
the
Ratio
tiothe
Deﬁspecific
nition).
ra tio error.
(See
MG
745
.094 ±.015
.025 ±.002
Figures
for
Ra
Deﬁ
nition).
Range
1 0.04
1776-C6815
9660
Meg900 .6
900
1200
0.003 Extended
0.005
101200
0.04
0.05
0.1Meg 0.05
30 .5005 ±.030
5 Range
0.010.003
1776-C681
10
Range
±1%
10
N/A
N/A
1
1776-C6815
9MG
Meg
K K 901,000
K90 K 9 K 9 K 750
1 K 1 K400
0.005
10 Ω
0.1
30
0.01
Standard
�1%,
�0.5%,
�0.25%,
�0.1%
�.025
.109
6
5
4
3
2
7
1
(2.39
±.38)
Ratio
Temperature
Coefﬁ
cient:
.025
.313
�.030
�.002
Resistance0.1
Dimensions
(.64 ±.05)
Max.
1776-C48
0.1
Rangeand
1 (millimeters)
Meg
1.1111M
101.01K
10.01K
30(12.70 ±.76)
10in inches
0.01 0.003 0.005 1
0.03
Type
1
Figures
Deﬁnition).
0.5 10
600
750 1.0001K
200
� 11
8 Meg
N/A
N/A1200
MG655
5 for6 the
4 Temperature
3
2
7 Ratio
Model
WattRatio
Coefﬁ
cient:
(2.77
�.64)
1
Range
1776-C6815
9Continuous
Meg
900 KOverload
90 K Dielect.
9K
1K
1200
0.003
0.005
10 1200
0.04
0.05
0.1
30
5
0.01
�.76)
�.05)
(7.95
(.64
6
5
4
3
2
7
1
1776-C48
0.1
0.1
Range
1
10
Meg 1.1111M
101.01K
10.01K
1.0001K
30
10
0.01
0.003
0.005
11
0.03
Ratio
Temperature
Coefﬁ
cient:
±.0150.03.025
.094
Temperature
Coefficient:
Standard
Extended
±.002
.750
±.030Range
Maximum
ra
tio
TC
error.
(See
-151200
1776-C48
1200
0.1
0.1
1
10
Meg
1.1111M
101.01K
10.01K
1.0001K
30
10
0.01
0.003
0.005
11
Rating
No.
age
Strength
A
B
C
St'd
with
"-15"
rating
�1%
Min.
1
Range
.8
2,000
750
600
20
Meg
N/A
Ω
N/A
MG
680
1776-C481
0.05
30
10
0.01
0.005
11
0.03
10 Meg Volt.
1.1111M 101.01K 10.01K 1.0001K
0.1
0.003
Resistance
Tolerance:
(2.39�.015
±.38) .025
Maximum
TCCoefﬁ
error.cient:
(See
.094
6 ratio
5
4 Temperature
3
2
7
1
±.05)
(.64�.002
±.76)
Ratio
Max.
Max.
.500 �.030
Min.
MG
731 0.6 10Oper.
Range
1
Maximum
ra
tio
TC
error.
(See
1776-C481
0.05
30(19.05
10 Range
0.01 0.003 Resistance
0.005
0.03
1776-C48
0.1
0.1
Meg
1.1111MType
101.01K
10.01K
1.0001K
1 10.01K
the
specific
Figures
for
the
1,000
750
400 11
� 111200
10
Meg
N/A
N/A1200
MG660
1
1776-C481
0.05
30
10
0.01
0.005
0.03
10
Meg
1.1111M
101.01K
1.0001K
(2.39
0.1 0.1
�.76)
�.05)
(12.70
(.64
0.005
Range
1
.094�.38)
±.015
1776-C4815 10 Meg 1.1111M 101.01K 10.01K 1.0001K 11
1200
0.05
5
30
0.010.003
0.003
0.03
�.015
.094
TC
Specifications
.025
±.002
1.000
±.040
the
specific
Figures
for
the
Extended
Range
�1%
.025
.313
�.020
�.002
Maximum
ra
tio
TC
error.
(See
Resistance
Range
Tolerance
1.0
4,000
Meg N/A
N/A
N/A
MG10
710
the
specific
Figures
for
the
Range
0.5
200800
�Ω
550
Meg
7507501.0001K
1
MG650
0.005
Range
1
1776-C481
10
Ra
tio
Deﬁ
nition).
1776-C4815
1200
0.05
0.1
5
30
0.01
0.003
11 N/A
0.03
Meg600
1.1111MType
101.01K
10.01K
±.38)
(2.39
(2.39
�.38)
(.64�.002
±.05)
±1.02)Range
(25.40
.094 �.015
�.51)
�.05)
(7.95
(.64
0.005
1
.750
�.030
.025
1776-C4815
1200
0.05
0.1
5
30
0.01
0.003
11
0.03
10
Meg
1.1111M
101.01K
10.01K
1.0001K
Ra
tio
Deﬁ
nition).
1776-C61
1200
0.1
30
10
0.1
0.1
0.01 0.005 0.01
900 � 6 N/A
9750
K
Range 2
the
specific
Figures
for
the
0.8 9 Meg
2,000900 K Type901K
20 Meg
N/A
600
MG680
Ra
tio
Deﬁ
nition).
(2.39
�.38)
Standard
and
±.030
.140
(19.05
(.64
�.76)
�.05)
Range
1:
-40°C
to
+85°C.
0.005
1
Standard Coefﬁcient:
�1%, �0.5%,
�0.25%,
±.002
.025�.002
.400�.030
±.060
1776-C4815 10
0.05
5
11
0.03
Meg 1.1111M
1776-C61
1200
0.1Meg
30.313
10
0.1
0.1
0.01 0.003
0.005
0.01
�.025
.109
9 Meg
900 K 101.01K
90 K 10.01K
900800 Ω
6
9 K 7501.0001K
Range
2
Temperature
.025
±80
fromto
-15°C
to�0.1%
+105°C,
1,000
N/A 30 30
N/A
Range
2 0.10.1
1776-C61
0.1
10±.152)
0.01
0.01
9MG
Meg
K K 90
K901K 9 K 9750
6 61200
2 ±.76)
Range
1:-40°C
-40°C
+85°C.
Type
600.6
200 �
820
Meg 0.1N/A
N/A
MG655
(3.56�.015
1776-C611
9712
Meg900
900
K 900900
1200
0.1
0.05
10 Range
0.010.005
0.005
0.01
Rareferenced
tio ppm/°C
Deﬁ
nition).
MG
740 0.5
St'd
with "-15" Range
(.64�.002
±.05)
(10.16
(2.77
�.64)
.094
1:
to
+85°C.
(7.95�.040
(.64
�.76)
�.05)
.025
1.000
Range
2:
0°C
to
+70°C.
Range
2
to
+25°C.
1776-C611
9
900
K
90
K
K
900
6
1200
0.05
30
10
0.1
0.01
0.01
1776-C61
0.1
0.1
0.005
Meg
9
Range
2
1.0
4,000
750
800
�
50
Meg
N/A
N/A
Type
MG710
2 ±.030
Range
rating
St'd
with
1776-C611
Meg
K K 90
K901K 9 K 9 K 900 1 K 6 61200
0.1 0.1
0.050.1
30(25.40
10±.060
0.01
0.01
.150�.38)
Range2:2:
0°C
to�1%
+70°C.
Resistance
±.002
.032�.05)
.562
1:
-40°C
to
+85°C.
�1.02)
(.64
Range
2 0.10.1
1776-C629MG
9 Meg9001.0
900
1200
30.500
10 (2.39
0.010.005
0.005
0.01 "-15" rating
�.015
.094
.025
�.030
�.002
Range
0°C
to
+70°C.
TC
Specifications
1,000
750 400200
Ω 6.5
Meg N/A
N/A
Meg 1020
Range
2
(3.81 ±.76)
2
3
4
5
6
7
1
0.6 9714
1,000900 K Type
Meg
(.81 ±.05)
(14.27 ±1.52)
MG660
1776-C611
900
0.05
1776-C62
Meg
901K
9750
K
1 K � 6 N/A
1200
0.1
0.1
30
10
0.1
0.01 0.005 Range
0.01
Voltage
Coefficient
of+105°C,
Ratio
�.38)
(2.39
�.030
.140
�.76)
�.05)
(12.70
(.64
2 2 0.1
Range
0°C
to�1%
+70°C.to
from
+25°C
.400 �.060
.025
1776-C62
9 Meg
900 900
K K 90 K90 K 9 K 9 K 1 K 1 K 6 61200
0.1 0.1
30 30
10
0.01
0.01
Range
2 Range
3
4 ±80
5 ppm/°C
62: Coefficient
7
1
1776-C621
9 Meg
1200
0.05
10 Range
0.1 �.002
0.010.005
0.005Extended
0.01
Voltage
of Ratio
Ratio
Type 2
0.6
1,000
750
800 �
20
Meg 0.1N/A
N/A
MG712
Extended
±.030
.140
6
5
4(ppm/volt):
2
7
1
±.002
.025�.05)
.750
±.060
(3.56
�.76)
Coefficient
of
2
Range
�.152)
(10.16
(.64
Rto1 +50
in series
with
any
1776-C62
0.1
-200
ppm/°C
ppm/°C
from
1776-C621
Meg 1.0
900 K 2,000
90 K
9 K 750 1 K400 Ω6 26
1200
0.1Meg 0.05
30.750
10 Range
0.1
0.01 0.005
0.01
.094
�.015
Standard
and3 Voltage
50
N/A
Meg
MG9715
�.030
�.002
.025
MG
750
2 ±.76)
(3.56
Range
(.64
±.05)
(19.05
±1.52)
1776-C621
9
Meg
900
K
90
K
9
K
1
K
6
1200
0.1
0.05
30
10
0.1
0.01
0.005
0.01
1
in
series
with
any
(ppm/volt):
R
2
3
4
5
6
7
1
2
Range
�80
ppm/�C
from
-15�C
to
+105�C,
600
�
0.8
2,000
750
20
Meg
N/A
N/A
MG680
Type
1
Voltage
Coefficient
of
Ratio
1776-C6217 9 Meg
900 K
6
1200
0.02
30
10
0.1
0.01 0.005 0.01
90 K
9K
1K
0.1
(2.39
�.38)
-15°C
to
+25°C.
�.030
.150
(19.05
(.64
�.76)
�.05)
St'd
with
"-15"
1
in
series
with
any
(ppm/volt):
R
.562
�.060
�.002
.032
combination
of
R
2
,
R
3
,
R
4,
and
Range
2
Temperature
Coefﬁcient:
1776-C621
0.05
1776-C6217
1200
0.02
301.000 ±.060
10
0.1
0.01 0.005
0.01
9750
K
1 K � 66.5 Meg
0.1
.140
±.030
1.0 9 Meg
1,000900 K Type902K
200
20 Meg
N/A
MG714
referenced
to
+25�C.
±.002
.025
(3.81
�.76)
combination
of
R
2
,
R
3
,
R
4,
and
2 2 0.10.5
(ppm/volt):
R
1 in series with any
�1.52)
(.81 �.05)
1776-C6217
9MG
Meg
K K 90 4,000
6 Ω71200
10 50 Range
0.01
0.005
0.01
K90 K 9 K 9 K 750
1 K 1 K600
Meg0.02
N/A 30(14.27
70
Meg 0.175
rating
Range
1776-C742
9716
Meg9001.5
900
1200
0.25
0.25
50
0.04
0.02
0.04
.094
�.015
.025
1.000
�.040
�.002
±.76)
(3.56
2
,
R
3
,
R
4,
and
combination
of
R
R
5,
100
volts
to
rated
voltage.
(.64 ±.05)
(25.40 ±1.52)
Insulation
Resistance: 10,000 Megohms, min.
2
Range
1.0 9 Meg
4,000900 K Type
800
500.25
Meg
N/A
MG710
1776-C6217
6 N/A
0.02
30
10
0.1
0.01 0.005
0.01
0.1
2
Range
1776-C742
901K
9750
K
1
K � 7
1200
0.25
50
50
0.5
0.04
0.02
0.04
�.38)
(2.39
Resistance
R
5, 100 volts
to rated
voltage.
.140
�1.02)
(.64 �.002
�.05)
combination
R2, voltage.
R
3, R4, and
.025
1776-C742
9 Meg Meg
900 900
K K 90
K902K 9 K 9750
7 726
1200
0.25Meg
0.25
50(25.40
50
0.04
2 ±.030
Range
2 0.5
.240�.030
TC from
Specifications
1776-C74
K 1 K 400
1K �
1200
0.1
0.1
50.750
50 Range
0.5
0.04 0.02
0.02 0.04
0.04
.710�.060
±.050
.040 ±.002
2,000
N/A
Meg
MG715
Type
5,
volts
toofrated
�80
+25�C
to
+105�C,
2
3
4 R
5 100
6ppm/�C
7
1
MG
780 1.0MG9
(3.56
225 M (19.05
Range
Meg 5075
Overload/Overvoltage:
5 times
rated
power with
�1.52)
(.64 �.05)
Load
Life:
Ratio
stability
of
Range
2
Extended
1776-C742
0.25
�.030
.140
1776-C74
9717
Meg 1.5
900 K 2,000
90 K
9 K 750 1 K600 Ω7 17
1200
0.1Meg 0.25
0.1
50
50
0.5
0.04 0.02
0.04
±.76)
(6.10�.76)
.400
�.060
�.002
.025
±1.27)
(18.03
±.05)
(1.02
R
rated
voltage.
2
3
4
5 5, 100
6 ppm/�C
7voltstoto
1
-200
+50
ppm/�C
from
Load
Life:
Ratio
stability
of
2 2 0.50.3
Type
1,000
800 �
200.25
Meg 0.1N/A
N/A
MG712
1776-C74
9 Meg
900 900
K K 90
K902K 9 K 9750
7 31200
0.1
50 50
50 50 Range
0.04
0.02
0.04
Range
1776-2320.6
9 Meg
1200
0.25
0.04
0.02
0.04
K 1 K 900
(3.56
�.76)
.140
�.030
6
5
4
3
2
7
1
Rangeand
applied
voltage
not
to
exceed
1.5
times
max�.152)
�.05)
(10.16
(.64
.025
�.002
1.000
�.060
re
sis
tance
under
full
load
at
Load
Life:
Ratio
stability
of
.140
±.030
Standard
±.002
.025
1.500
±.080
Range
2
1776-C74
1
K
7
0.1
0.1
0.5
1776-232
9
Meg
900
K
3
1200
0.25
50
50
0.3
0.04
0.02
0.04
90
K
9
K
900
0.25
-15�C
to
+25�C.
Type
2
600
�
1.5
4,000
750
75
Meg
N/A
70
Meg
MG716
150 Meg0.25 N/A 50(25.40
from
-15�Cfull
tostability
+105�C,
N/A
MG 720 9002.0
2
3
4
5�80
6ppm/�C
7
1
(3.56
re
sis
tance
under
load
Page 1at
Load
Life:
Ratio
of
(.64
(3.56�.76)
2 ±.76)
1776-232
K K 90 6,000
50±2.03)
0.04
K90 K 9 K 9 K 750
900900 13K 31200
0.25
(.64�.05)
±.05)
(38.10
�.030
.150
1776-23 9 Meg
9 Meg
900
1200
0.1
0.1
50
50 Range
0.02 0.02
0.01
0.02
2 0.30.2
Range
imum
continuous
operating
voltage
for
5
seconds.
St'd0.04
with
"-15" re
.562 �1.52)
�.060
�.002
.032
+70°C,
rated
voltage
applied
toof 2
sis
tance
under
full
load
at
1,000900 K Type
200 � 36.5 Meg
200.25
Meg
N/A
MG714
referenced
to +25�C.
1776-2321.0 9 Meg
0.25
0.3
0.04 0.01
0.02 0.02
0.04
1776-23
902K
9750
K
900
1200
0.1
0.1
50
50
0.2
0.02
2
Range
(3.81
�.76)
.240
+70°C,
rated
voltage
applied
to
�1.52)
�.05)
(14.27
(.81
.240�.030
±.030
re
sis
tance
under
full
loadmin.
at
.040
.710 �.050
rating
±.002
.040�.002
MG
785 1.5
Insulation
Resistance:
10,000
Megohms,
1776-23
9MG
Meg
9002.0
K K 90
K902K 9 K 9750
900600
1200
0.1
0.02
0.01
0.02
2 2 0.2
Range
1776-242
9721
Meg
900
1200
0.25
50 Range
0.3
0.04
0.02
0.04
K 750
1 K200
0.25
2,000
�3 Ω317
Meg
225
M M 50 501.00050±.050
Meg
R
1
in
series
with
any
combination
Type
MG717
4,000
100
Meg 0.1
300
51
Meg 75
+70°C,
rated
voltage
applied
to
Resistance
Range
Overload/Overvoltage,
∆R
(6.10
(6.10�.76)
±.76)
(18.03
(1.02
(1.02�.05)
±.05)
(25.40
±1.27)
�.030
.140
2
Range
1776-23
900
0.1
0.1
0.2
0.02 0.02
0.01 0.04
0.02
1776-242
9 Meg
900 K
3
1200
0.25
50
50
0.3
0.04
90 K
9K
1K
0.25
R
1 in series
with
any combination
.025
.750 �1.27)
�.060
�.002
+70°C,
rated
voltage
applied
to
1.0
2,000
750
400
�
50
Meg
N/A
26
Meg
MG715
Type
2
�80
ppm/�C
from
+25�C
to
+105�C,
of
R
2
,
R
3
,
R
4,
and
R
5
for
2000
hrs.
2 ±.030
Overload/Overvoltage:
times
rated
power
1776-242
K K 90 K90 K 9 K 9 K 1 K 1 K 3 31200
0.250.1
50 (19.05
50±.080
0.04
0.04
0.25
2 0.3
Range
1 in series 5with
any
combination
1776-24 9 Meg
9 Meg900 900
1200
0.25
50
50 Range
0.2
0.02 0.02
0.01
0.02
�.76)
(3.56
.140�.030
.140
�1.52)
�.05)
(.64
.025�.002
±.002
2.000
.025
1.500
�.080
Standard Rof
0.5%
2,ppm/�C
R3, R4,to
and
R
5max.
for
2000
hrs.
2.5
10,000
1.5 K3 N/A1200
Meg N/A
N/A
N/A
1776-242
0.25
0.3
0.04 0.01
0.02Extended
0.04
R-200
1Rin
series
with
combination
2
Range
1776-24
Meg
900 K Type
902K
9750
K 750 11KK
0.25
0.1
50
50
0.2
0.02
0.02
2.0MG9725
6,000
150200
Meg
MG720
+50any
ppm/�C
frommax(3.56�.76)
±.76)
(3.56
(.64�.05)
±.05)
±2.03)
(50.80
(.64
�2.03)
with
applied
voltage
toRexceed
1.5
times
R
3Stability
,
4, and R
5 for
2000
hrs.
.140
�.030
Range
20.02
3
4
5 of
6 R27,not
1
Range
2 2 0.20.2
1776-24
K K 90 K90 K 9 K 9 K 1 K 1 K 3 31200
0.25
0.10.05
50(38.10
50 50 Range
0.02
1776-241 9 Meg
9 Meg900 900
1200
50
0.02 0.01
0.01
0.02
0.25
.025
�.002
1.000
�.060
Shelf
of
Ratio:
Six
toStability
600
4,000900 K Type
750.25
Meg
N/A
MG716
with
"-15"
N/A
of
R72, R
3+25�C.
, R4, and of
R5 for
hrs.
2 0.02
3
4
5 rating
6-15�C
1 St'd
Range
2
.240�.030
±.030
1776-24
902K
9750
K
1
K � 370 Meg
1200
0.1
50
50
0.2
0.02 0.01
1776-241
0.05
�.76)
(3.56
MG
810 1.5 9 Meg
.040�.002
±.002
1.500
±.080
.240
Shelf
Ratio:
Six
�.05)
(.64
�1.52)
(25.40
.040
1.000
�.050
imum
operating
voltage
5 2000
seconds.
250
Meg0.05
6,000
1,000
750
77
Meg 100
1776-105
9730
Meg
900
1200
0.1
30
5 Range
0.02
0.01 0.01
0.01
K 1 K 200
N/A500
+0,
-0.5
Range
2 0.2
6months
5
4
3continuous
2 0.02
7
10.005
2 ±.76)
2.0
4,000
750
�3 Ω451
Meg
300
M M 50(25.40
Meg
at shelf
conditions.
MG721
(6.10�.76)
Type
1776-241
9MG
Meg
9003.0
K K 90
1200
50±2.03)
0.02
K902K 9 K10
0.25
(1.02�.05)
±.05)
(38.10
Shelf
Stability
offor
Ratio:
Six
(6.10
(1.02
�1.27)
Extended
0.8%
max.
�.030
.240
2 0.01
3
4 Range
5
6
7
1
1776-105
9 Meg
900 K
4
1200
0.1
30
5
0.02
0.01
90 K
10
N/A
+0,
-0.5
Range
2
months
at
shelf
conditions.
1776-241
3
0.05
50
50
0.2
0.02 0.005
0.01
0.02
9 KK
1K
0.25
.040
.710
�.050
�.002
Shelf
Stability
of
Ratio:
Six
Insulation
Resistance:
10,000
Megohms,
min.
Type
1:4 DC5 Voltage
1.5
2,000
750
600 �
75
Meg
225
M 30 301.0005±.060
17 Meg
Type
2K
MG717
.315
±.030
®
±.002
.040
1776-C10
9731
Meg
900
9
1200
0.1
10
0.02
0.01
0.005
0.01
90
10
K
N/A
+0,
-0.5
2
Range
1776-105
9MG
Meg
9002.6
K K 90
4
1200
0.1
0.02
0.01
0.005
0.01
K
10
K
N/A
+0,
-0.5
2
Range
�.76)
(6.10
months
at
shelf
conditions.
2
3
6
7
1
.140
�.030
�1.27) (8.00 ±.76) (1.02
�.05)
.025 �.002
2.000 �.080
Overvoltage:
Maximum
voltage
4,000
1,000 1.5200
Ω4 N/A
150
Meg N/A
750 M (18.03
40
Meg +0,
1776-105
5
months
at AC
shelf
conditions.
2.5 9 Meg
750
Meg
10,000900 K Type
1776-C10
1200 200
0.1
30
10
0.02
0.01
902K
10
K
N/A K 9
-0.5
2
Range
MG725
(25.40 ±1.52)
(1.02 ±.05)
2Thermal
3 0.01
4 DC
5 Shock:
6
7
1 0.005
Mil-Std-202,
Method
107,
Type
2:
Voltage
or
V
�.76)
(3.56
Overvoltage:
Maximum
voltage
Overload/Overvoltage:
5
times
rated
power
�.05)
(.64
�2.03)
(50.80
rms
.140
�.030
Range
2 0.02
.025 �.002
1.500 �.080
1776-C105
9 Meg900 900
K N/AN/A 9 91200
1200 +0, +0,
-0.5 0.10.1
5 Range
0.02
0.01
0.01
1776-C10
9 Meg
K K 90 K902K 10 K10
30 30
0.01
-0.5
2 ±.030
rated DC voltage.
6
5
4
3 0.01
20.005
7of 1.67 times Maximum
1 0.005
.240�.76)
Overvoltage:
voltage
6,000
750
1750
K Ω9 N/A
150
Meg
N/A
MG720
.040 ±.002
2.00010±.080
MG
815 2.0
Range
2
max.
1776-C10
10
(3.56
1776-C105
Meg
900 K Type
90 K
10
K
N/A
1200
0.1 M (38.10
30
5
0.02
0.01
0.01
2Cond.
3 applied
4C, 5 R
6 0.25%
7 1.67
1 0.005
.240
of
times
rated
DC
voltage.
3.6
10,000
1,000
300-0.5
Meg 1,000
(.64
�.05)
�2.03)
178
Meg +0,
MG9735
�.002
.040
1.500
�.080
Overvoltage:
Maximum
voltage
with
voltage
not
to
exceed
1.5
times
(6.10�.030
(1.02
±.05)
(50.80
2 0.02
Range
Resistance
Range
Overload/Overvoltage,
�Rmax250-0.5
Meg 0.1
M 30(38.10
6,000
750
Meg
MG730
Volts
DC
or
peak
AC
applied
to
Type
2 ±.76)
1776-1 3.0
9 Meg
1200 +0,
0.05
30
10 Range
0.02
0.010.005
0.005
0.01
N/A �
0.25
1776-C105
9 Meg
900 900
K K 90
K902K 10 1,000
K10 K N/A500
9 277
1200
5±2.03)
0.01
0.01
�.76)
(6.10
of
1.67
times
rated
DC
voltage.
(1.02
�.05)
�2.03)
.240
�.030
Range
2
Volts
DC
or
peak
AC
applied
to
.040
�.002
1.000
1776-C105 9 Meg
9
+0,
-0.5
0.1
5
1776-1
900 K
2
1200 100
0.05
30
10
0.01 0.005
0.01
90 K
10
K
N/A
0.25
of
1.67
times
rated
DC
voltage.
Moisture
Resistance:
Mil-Std-202,
Method
imum
continuous
operating
voltage
for
5
seconds.
.315 ±.030 0.02
±.002
.040
1.500�.050
±.060
2.0
4,000
750
200
�
Meg
300
M
51
Meg
MG721
Type
2
R
1
and
any
combination
of 106,
Rto
2,
2 0.02
Range
300
Meg0.05
1,500
64
Meg 0.25
�.76)
(6.10
2 ±.76)
Standard Volts DC or peak
0.5% max.
1776-14 9MG
9740
Meg9003.6
900
K N/AN/A300
1200
0.25
0.1 M30(25.40
30
10 Range
0.02
0.010.005
0.005 0.01
0.01
.315
�.030
�.05)
(1.02
AC
applied
�1.27)
1776-1
Meg
K K 90 6,000
2 Ω21200
10±1.52)
0.01
K90 K 10 K101,000
1.000
�.060
�.002
.040
(8.00
(1.02
±.05)
(38.10
R
1 and
any
combination
of
R
2, 2
2
Range
R
0.4%
max.
4,000900 K Type902K 1,000
200
Meg
750
Volts
DC
or
peak
AC
applied
to
MG731
Type
1:
DC
Voltage
1776-1 2.6 9 Meg
0.05
Page
1
of
1776-14
10 K
N/A � 240 Meg
1200 150 0.25
0.1M
30
10
0.02
0.01
0.005
0.01
�.76)
(8.00
(25.40
�1.52)
�.05)
(1.02
R
3,and
R
4, any
and
R
5 in series with
R
1
.140
�.030
�.002
.025
2.000
�.080
R
1
combination
of
R
2
.240
±.030
1776-8
9.9
Meg
90
K
10
K
N/A
N/A
1
1200
0.25
0.1
30
25
0.2
0.02
0.01
0.02
Range
2
2
Range
1776-14
9MG
Meg
9005.0
K
90
K 2 10 K 750
N/A 1.5 1
0.25
30 3.00010±.100 Range 2 0.02.040 ±.002
0.01 0.005
St'd 0.01
with
"-15"Voltage
rating
R31, or
R4,
and
Rat
5 N/A
in
series at
with
2.5
K2K 211200
Meg
10,000
N/A
MG725
and
any
combination
ofrated
RR2,1,
15,000
1,000
500
Meg 0.1N/A
1,500
288
Meg 200
Type
2:
DC
V
AC
�.76)
(3.56
1776-14
9745
Meg
900
90
K catalog
10
K are
N/Acovered
1200
0.25
0.1 M (50.80
30
10
0.02
0.01
0.01
1776-8 products
9.9
Meg shown
90 KK Type
10
N/A
25 also
0.2
0.02 0.005
0.01
0.02
2
Range
.240
�.030
(6.10
±.76)
Load
Life:
1,000
hours
+125°C
�.05)
(.64 �.002
�2.03)
.040
2.000
�.080
(1.02
±.05)
(76.20
±2.54)
for
10
seconds.
Certain
in
this
by
one
or
more
patents,
there
are
patents
pending.
rms
Range 2
Rfor
3, R
4, seconds.
and
RR55 inin series
with
R
1
1,000
Meg 1,000
Meg
MG735
Type
1776-9 3.6
9.9 10,000
Meg
11200
1200 300
30
0.02 0.02
0.01 0.01
0.005 0.02
0.01
N/A N/A750
N/A �
0.25
�.76)
(6.10
10
1776-8
9.9 Meg
90 K90 K 10
K102K N/A
1 178
0.25
0.10.1M 30(50.80
25 10 Range
0.2
2
(1.02
�.05)
�2.03)
R
3
,
R
4,
and
series
with
R
1
Extended
Range
max.
voltage,
not
to
exceedOverload/Overvoltage,
rated 0.8%
power.
.240
2
Range
.315�.030
±.030
.040
1.500
1776-9
9.9 Meg 90 K
1200
0.1
30
10
0.02
0.005
10 K
N/A
N/A
0.25
±.002
.040�.002
2.125�.080
±.060
1776-8
25
0.2
0.02
0.01
0.02
2
Range
6Range
5
4 0.01
3Resistance
2
7 for
1 0.01
5.0
10,000
1,000 500400
500
Meg 750
2,500
128
Meg 250
MG9.9
750
1,000
Meg
� Ω177
M M (38.10
6,000
Meg
MG730
Type
2
10
seconds.
Range
2
Voltage
Rating: DC or�RRMS
(8.00�.030
�.76)
(6.10
1776-91 3.0
Meg
1200
10 Range
0.02
0.005
0.01
0.25
(1.02�.002
±.05)
(53.98
.315
2 ±.76)
(1.02
�.05)
�2.03)
.040
1.500
�.060
for
10
seconds.
1776-9
9.9 Meg
90 K90 K 10 K10 K N/A N/A N/AN/A 1 11200
0.10.05
30 30
10±1.52)
0.02
0.01
0.25
6
5
40.01
3
2 0.005
7
1 0.01
2
Voltage
Rating:
DC
or
RMS
Range
64
Meg
3.6
6,000
1,000
300
�
300
Meg
1,500
M
Type
2
MG740
1776-9
0.1
1776-91
9.9 Meg 90 K
1
1200
0.05
30
10
0.02 �.05)
0.01 0.005
0.01
10 K
N/A
N/A
0.25
(8.00
Thermal
Mil-Std-202,
Method
107,
(1.02
�1.52)
(38.10
AC voltage
applied
R
1 in
Resistance
Load
Life,
∆Rto
.315�.76)
Standard
0.5%
max.
6 Shock:
5
4
30.005
2
7Range
�.030
.315
.0401�.002
±.002
3.125
±.060
Range
2
1.000
�.060
.040
B
1776-912
Meg
N/A
1200
0.25
0.02
5 Range
0.02
0.01
2 ±.030
Rating:
DC
or
RMS
1.500
±9.9
.125
AK102K N/A1,000
15,000
1,000
750
Meg0.05
3,750
192
Meg 0.25
6
5
40.01
3
2 0.005
7 Voltage
1 0.01
MG
780
1776-91
9.9
Meg
907.5
K90 K 10
1 Ω140
1200
10±1.52)
0.01
N/AN/A
C
AC
voltage
applied
1 in
2.6
4,000
200600
�
Meg
750
M M30 30
MG731
(8.00�.030
±.76)
Voltage
Rating:
DC to
or R
RMS
Range
2 0.02
(1.02�.002
±.05)
(79.38
�.76)
(8.00
1776-91
0.05
10
1776-912
Meg
90 K Type
10 K
N/A
N/A
1 Meg
1200 150 0.25
0.02
30
5
0.02
0.01 0.005
0.01
.240
(25.40
�1.52)
�.05)
(1.02
ΔRrating
0.25%
max.
Cond.
C,"-15"
3.18)
(38.10 ±9.9
.040
3.000
�.100
series
with
any
combination
of
2
Range
Standard
0.5%
max.
5.0
15,000
1,000
1
K
500
Meg
1,500
M
288
Meg
MG745
Type
2
AC
voltage
applied
to
R
1
St'd
with
N/A
1776-C4
10
Meg
1.1111M
101.01K
10.01K
1.0001K
8
1200
0.25
0.25
30
10
0.1
0.01
0.005
0.01
2 ±.030
Range
(6.10
se
ries
with
any
combination
of
.315�.76)
1776-912
9.9 Meg 90 K
10 K
N/A
N/A
1
1200
0.25
0.02
30(76.20
5
0.02
0.01
0.005
0.01
�.05)
(1.02
�2.54)
AC
voltage
applied
to
R
1 in
in
±.002
.040
4.000
±.120
.240
�.030
Range
2
.040 �.002
2.000 �.080
1776-912 MG9.9
Meg 8.0
90 K 20,000
10 ®
K 10.01K
N/A
N/A800 Ω8
1 320
0.02
5
0.02
1776-C4
10
Meg
1.1111M
101.01K
1200
0.25
0.25
30
10
0.1
0.01 0.005
0.01 Resistance:
1,0001.0001K
1,000
Meg 1,000
5,000
M (101.60
Meg 300
R
2, R3, Mil-Std-202,
R
4, and R5. Method 106,
785
Moisture
(8.00
±.76)
3.6
10,000
1,000
750
�
Meg
M
178
Meg
MG735
Type
2
(1.02
±.05)
±3.05)
Range
2
se
combination
of
�.76)
(6.10
1776-C4410 Meg
10 Meg
1.1111M
101.01K
10.01K
1.0001K8 81200
1200
0.1
0.1
30
0.1 �.002
0.010.005
0.005
0.01
.315
�.030
R
2ries
, R3with
, with
R4, any
and
R
5max.
.
(1.02
�.05)
�2.03)
.040
2.125 �.060
St'd
with "-15"
rating
0.8%
Extended
Range
0.8%
max.
series
any
combination
of
2 2 0.1
1776-C4
1.1111M
101.01K
10.01K
1.0001K
0.25
0.25
30(50.80
10 10 Range
0.01
0.01
Range
5.0
1,000
400
500
Meg
2,500
�
M
10,000
128
Meg
MG750
Type
2
1776-C4
0.25
0.25
1776-C44
10
Meg
1.1111M
101.01K
10.01K
1.0001K
8
1200
0.1
0.1
30
10
0.1
0.01
0.005
0.01
.315
±.030
�.76)
(8.00
ΔR
0.4%
max.
±.002
.040�.05)
5.000 ±.120 .315
(1.02
DIMENSIONSMG
IN INCHES
AND (MILLIMETERS)
Temperature:
-40°C
RStorage
and
RR55..
2
Range
Meg 1,250
10.0
25,000
1,0001.0001K
1 K 8 400
6,250 M (53.98
810
.040
1.500 �1.52)
�.060
R2,2,RR33, ,RR4,4,
and
1776-C441
Meg
1.1111M
101.01K
10.01K
1200
0.1Meg 1,500
30
10 Range
0.1
0.010.005
0.005 0.01
0.01
(8.00�.030
2 ±.76)
±.05)
(1.02�.002
(127.00
Storage
Temperature:
-40°C
64
Meg
3.6 10
6,000
1,000
300 �
300
M 30(38.10
Type
2 10.01K
MG740
1776-C44
1.1111M
101.01K
1.0001K
8
1200
0.1Meg
0.10.05
10±3.05)
0.01
Extended
Range
0.8%
max.
2 0.1
Range
�.76)
(8.00
Thermal
Mil-Std-202,
Method
107,
1776-C4410 Meg
0.1
.315
�.030
1776-C441
10 Meg 1.1111M 101.01K 10.01K 1.0001K 8
1200
0.1
0.05
30
10
0.1 �.002
0.01 0.005
0.01
(1.02
�.05)
�1.52)
.040
3.125 �.060
to +85°C.
Load
Life:Shock:
1,000
hours
at +125°C
at-40°C
rated
2
7.5 10 Meg
15,000
1,000 1.0001K
600 � 192
Meg 3,750
MG780
2
Range
Storage
Temperature:
±.120
±.002
.040
1776-C34
1.1111MType
101.01K
10.01K
8 Meg
1200 750 0.25
0.25M
506.000
50 Range
0.5
0.04 0.02 0.04
.350
±.040
�.76)
(8.00
to
+85°C.
2
(79.38
�1.52)
�.05)
(1.02
Storage
Temperature:
-40°C
1776-C441
10
Meg
1.1111M
101.01K
10.01K
1.0001K
0.10.25
10 50
0.10.5
0.01
0.005
0.01
15.0
30,000
1,000
18K 81200
Meg0.05
10,000
M30 (152.40
384
Meg 2,000
MG
815
.240
�.030
ΔR
0.25%
max.
Cond.
C,
.040
�.002
3.000
�.100
2
Range
1776-C441
0.1
0.05
30
10
0.1
0.01
0.005
0.01
1776-C34
10
Meg
1.1111M
101.01K
10.01K
1.0001K
1200
0.25
50
0.04
0.02
0.04
±.05)
(1.02
±3.05)
(8.89
±1.02)
Solderable
Leads
voltage,
not
to
exceed
rated
power.
Derating
Curve:
100
5.0
15,000
1,000
1
K
500
Meg
1,500
M
288
Meg
MG745
Type
2
to
+85°C.
�.76)
(6.10
.315
�.030
Range
1776-C532
900 K
90 K
9K
900
N/A
5
750
0.25
0.25
25
25 Range
0.4 �.002
0.02 0.01 0.02
�.05)
(1.02
�2.54)
(76.20
.040
4.000 �.120
to +85°C.
2 2
1776-C34
10 Meg
1.1111M
101.01K
0.25
0.25
50 25
0.04
0.04
8.0
20,000
1,000
800
�8 320
1,000
Meg
5,000
M 50
Meg
MG785
Type
2K10.01K
80
Moisture
Resistance:
Mil-Std-202,
Method 106,
1776-C34
10
Meg
1.1111M
101.01K
10.01K
1.0001K
81200
1200
50
50
0.5 �.05)
0.04 0.02
0.02
0.04
2 0.5
Range
1776-C532
900
KModels
90 K
9low
9001.0001K
N/A
5
750 are
0.25
25
0.4
0.02
0.01
0.02
�.76)
(8.00
with
inductance
construction
in0.25
shaded
areas.
(1.02
(101.60
Encapsulation:
High
Temperature
.315
�.030
Resistance
Range
Load Life, �R Silicone
.040 �.002
2.125 �3.05)
�.060
2
Range
1776-C53
900
K
90 K 60
9K
900
N/A
5 Meg
750
0.1
0.1 M
25
15
0.3
0.02 0.01
0.02
5.0
400 �
500
Meg 0.25
2,500
10,000
MG750
1776-C532
900 K
90 K90
9 K 9 2K 9001,000
N/AN/A
5 128
750750
0.25
25(53.98
25 15
0.02
0.01
0.02
2 2 0.4
Range
�.76)
(8.00
ΔR
0.4%
max.
RATED
POWER
ORK Type
.315
�.030
1776-C532
0.25
0.25
25
0.4
�.05)
(1.02
�1.52)
Range
1776-C53
900
KModels
900
5
0.1
0.1
25
0.3
0.02
0.01
0.02
Conformal.
.040
�.002
5.000
�.120
with
Caddock's
Non-Inductive
Resistance
Pattern
are
in
non-shaded
areas.
Type
2
400
Meg
10.0
25,000
1,000
1
K
1,250
Meg
6,250
M
RATED
VOLTAGE,
%
MG810
40
2
Range
1776-C542
900 K
90 K
9K
1K
N/A
5
750
0.25
0.25
25
25
0.4 �.05)
0.02 0.01 0.02
�.76)
(8.00
Standard
0.5% max.
(1.02
(127.00
.315
�.030
1776-C53
900 K K90 K90 K 9 K 9 K 900 900
5 5 750750
0.1 0.1
0.10.25
15 25
0.02
0.02
2 2 0.3
.040 �.002
3.125 �3.05)
�.060
Range
1776-C542
1 K N/AN/A
0.4
0.02 0.01
0.01
0.02
Load
Life: 1,000 hours at +125°C at rated
1776-C53
0.1 M 25 25
15 Range
0.3
Type 2
Meg 7500.25
7.5 900
15,000
1,000
600 � 192
Meg 3,750
MG780
20
�.76)
(8.00
(79.38
�1.52)
�.05)
(1.02
.040
6.000 �.120
1776-C54
900 K
90 K
9K
1K
N/A
5
750
0.1
0.1
25
15
0.3 �.002
0.02 0.01
0.02 "-15" rating
2
Range
.350
�.040
Model
Number:
Tolerance
St'd0.02
with
0.8%
max.
15.0
30,000
1 K 5 384
Meg
10,000
Meg
MG815
1776-C542
900 K
9
N/AN/A
0.25
0.25
25
0.02
0.01
Range
2 2 0.40.3
voltage,
not
to
exceed
rated
power.
0 K 92K 1 K1,000
1776-C542
0.25
0.25
25
0.4
1776-C54
900
K90 K90
K Type
1 KLTD.
5 750
750 2,000
0.1
0.1 M 25
25
15
0.02
0.01
0.02
Range
RHOPOINT
COMPONENTS
(152.40
(8.89
Tel:
+44 (0)1883 717988
.315�1.02)
�.030 (1.02
.040 �.05)
�.002
4.000 �3.05)
�.120
175 5225 750
275
1776-C541
KRoad
90 K Type925
1 K 125 N/A
0.1
0.05M
25
15
0.3
0.02 0.01 0.02
2
Range
8.0 900
20,000
1,000
800
�
1,000
Meg 5,000
Meg
MG785
2K 1 K75
Holland
Resistor
Value:
�.76)
(8.00
Fax:
+44
(0)1883
712938
1776-C54
N/AN/A
5 320
0.1 0.1
0.10.05
25
15 15 Range
0.02
0.02
2 2 0.3
Extended
Range
0.8%
max.
(1.02
(101.60
�3.05)
1776-C54 900 K
0.1
1776-C541
900 K90 K90 K 9 K 9 AMBIENT
K
1 KTEMPERATURE,
5 750
25
0.3 �.05)
0.02 0.01
0.01
0.02
Range
°C 750
Resistance
Range
Load
Life,
�R
Speciﬁcations:
New
NewNew
New
New
NewNew
N
Type MG Precision High Voltage Resistors
Now with Extended Resistance Range to 10,000 Megohms and Additional Models
Temperature Coefﬁcient as tight as 80 ppm/°C, Combined with Excellent Long-Term Stability and Precision Tolerances.
Type MG Precision High Voltage Resistors
Caddock's Micronox resistance ﬁlms are the source of
Preconditioning for Power and Voltage Ratings
the Type MG Precision High Voltage Resistors' outstanding
All power ratings and maximum
operating voltage ratings
∆
are for continuous duty. These ratings are based on precombination of performance features:
stress voltage levels
applied during the manufacturing
• Single-resistor values as high as 10,000 Megohms.
∆
process to provide for stable resistor performance even
• Maximum continuous operating voltages as high as
under momentary overload conditions.
48,000 volts ("-15" ratings).
Maximum
operating
voltages
60% higher
than the values
Now with
Extended
Range to 10,000
Megohms
and
Additional
Models
• Overvoltage
capabilities
of 150% Resistance
of standard working
Design Assistance
VoltagebyResistor
Setstowith
listed in
in Developing
the table mayHigh
be speciﬁed
adding "-15"
the
voltages for all
models and
"-15"Low
ratings).
Temperature
Coefﬁcient
as values,
tight as(except
80 ppm/°C,
Combined
withmodel
Excellent
Long-Term
Stability
and Precision
Tolerances.
TC Tracking.
number
(Example:
MG750-15).
Note that
overload
• Resistance
±1.0% to
±0.1%.
and
overvoltage
ratings
dodeveloping
not apply
to Ratings
the
"-15"
Caddock'sTolerances
Micronox from
resistance
ﬁlms
are the source
of
Preconditioning
for
Power
and
Voltage
For immediate
engineering
assistance
in
Low
Ratio
TCresistors.
matched
• Temperature
Coefﬁcient,
for standard
resistancehigh
range,
of
Resistance
ranges
for
"-15"
resistors
shown
in
the
table
the
Type MG Precision
High
Voltage Resistors'
outstanding
All
power
ratings
and
maximum
operating
voltage
ratings
voltage resistor sets, call or write our Applications Engineering and
we are
will
80 ppm/°C of
in performance
combination with
resistance tolerances
as
from
"-15
Min."
to "Standard
Max."
are
for
continuous
duty.
ratings
are resistor
based on
precombination
features:
be pleased
to offer
the
best
solution
from These
our
high
voltage
product
tight as ±0.1%.
stress
voltage Performance
levels applied during the manufacturing
Non-Inductive
capabilities.
•• Single-resistor
values as high as 10,000 Megohms.
Type MG resistors have demonstrated stability of 0.01%
process
provide are
for stable
resistor performance
even
Most tomodels
manufactured
with Caddock's
• Maximum
continuous
operating
voltages
as
high
as
per 1,000 hours in extended load life testing of Ordering
standard Information
:
under
momentary
overload
conditions.
Non-Inductive
Design
which
uses
a
serpentine
resistive
48,000
volts
("-15"values.
ratings).
MG750 -100M - 1%
resistance
range
Maximum
operating
60% lines
higherto than
valuesin
pattern
that provides
forvoltages
neighboring
carrythe
current
• Overvoltage
capabilities of 150% of standard working
listed
in the
table may
be speciﬁed
bymaximum
adding "-15"
to the
This exceptional performance has been proven through
opposite
directions,
thereby
achieving
cancellation
voltages for all models and values, (except "-15" ratings).
model
(Example:
MG750-15).
that overload
many years
of use in equipment that demands the highest
of ﬂux number
ﬁelds over
the entire
length
of Note
the resistor.
This
Hurst
Green
e-mail:
[email protected]
Models
with
low inductance
construction
are
in shaded
areas.
.315 �.030
.040 �.002
5.000 �.120
•reliability
Resistance
Tolerances
from
±0.1%.
1776-C541
900 K
9 K 9 2K
1 including
K1,000
N/AN/A
0.1Meg
0.05
25 25
15 15 and
0.02
0.01
0.02
2 2 0.3
Range
1776-C541
900
K90 Kstability,
90 K RH8
1 K ±1.0%
5 750
750 amplifiers,
0.1
0.05M
0.3
0.02
0.01
0.02
Range
overvoltage
ratings
do not
apply
the0.5%
"-15"
and
TWT
X-ray
efﬁcient
non-inductive
construction
is to
accomplished
without
Type
400
Meg
10.0
25,000
1 K5 to
1,250
6,250
Solderable
Leads
MG810
RHOPOINT
COMPONENTS
LTD.
Oxted,
Surrey,
9AX
web:
www.rhopointcomponents.com
�.76)
(8.00
Standard
max. resistors.
�.05)
(1.02
�3.05)
(127.00
Applications
Engineering
Sales
andinCor
porate
Ofﬁ
ce
Models
with
Caddock's
Non-Inductive
Resistance
Pattern
are in non-shaded
areas.
•systems,
Temperature
Coefﬁcient,
for standard
resistance
range,
of 6.000 �.120
Resistance
ranges
for "-15" resistors
shown
the
table
are
geophysical
instruments,
and
medical
electronics.
derating
any
advantages.
Applications
Engineering
Sales
and
Cor
porate
Ofﬁ
ce
Encapsulation:
High Temperature
Silicone
Conformal.
�.002performance
.350 �.040 of.040
17271
North
Umpqua
Hwy.
1717
Av
enue
RHOPOINT
COMPONENTS
St'd with "-15" rating
0.8%
max.
15.0
30,000
1,000
1 K 384 Meg tolerances
2,000 Meg 10,000
M (152.40
MG815
TypeLTD.
2
Tel:
+44Chicago
(0)1883
717988
80
ppm/°C
in
combination
with
resistance
as
�.05)
(1.02
�3.05)
�1.02)
(8.89
17271
North
Umpqua
Hwy.
IL-110.0201
1717
Chicago
Av
e
nue
from
"-15
Min."
to
"Standard
Max."
Applications
Sales
and
Cor
po
rate
Applications
Engineering
Sales
and+44
Cor(0)1883
po92507-2364
rate Ofﬁ
Ofﬁce
ce
Roseburg,
Oregon
97470-9422
Holland
RoadEngineering
Riverside,
California
Fax:
712938
Extended Range Riverside,
0.8%
max.92507-2364
Roseburg,
Oregon
97470-9422
Applications
Engineering
California
Sales Phone:
and
Corporate
Ofﬁce
tight
as
±0.1%.
17271
North
Umpqua
1717
Chicago
Av
eenue
17271
North
Umpqua
Hwy.
1717
Chicago
Av
nue
Hurst
Green
e-mail: [email protected]
web: www.caddock.com
Resistance
Phone:
(541)
496-0700
(951) 788-1700
DimensionsNon-Inductive
in• inches
and (millimeters)
e-mail: [email protected]
Speciﬁcations:
Performance
Max. Hwy.
Overload
Model
WattDielect.
Models
with
low
inductance
construction
are
in
shaded
areas.
e-mail:
[email protected]
•
web:
www.caddock.com
Phone:
(541)
496-0700
Phone:
(951)
788-1700
17271
North
Umpqua
Hwy.
1717
Chicago
Avenue
RHOPOINT
LTD.
Roseburg,
Oregon
97470-9422
Riverside,
92507-2364
Roseburg,
Oregon
97470-9422
Oxted,
Surrey,
RH8
9AX
Riverside,California
California
92507-2364
Continuous
For Caddock
Distributors
listed by country
see
caddock.com/contact/dist.html
Fax:
(541)
Fax: (951)
369-1151
web:
www.rhopointcomponents.com
• Type
MG
resistors
have demonstrated
stability
ofCOMPONENTS
0.01%
Standard
Extended
-15
Solderable
Leads
Rating
No.
age 496-0408
Strength Min.
A
B
C
Most
models
are manufactured
with
Caddock's
For
Caddock
Distributors
listed by country
caddock.com/contact/dist.html
Fax:
(541)
496-0408
Oper.
Volt.
Fax:(951)
(951)
369-1151
Resistance
Tolerance:
Roseburg,
Oregon
97470-9422
Riverside,Phone:
California
92507-2364
e-mail:
[email protected]
•see
web:
www.caddock.com
e-mail:
[email protected]
• web:
www.caddock.com
Max.
Max.
Min.
Phone:
(541)
496-0700
Phone:
(541)
496-0700
Phone:
(951)
788-1700
788-1700
Models
with
Caddock's
Non-Inductive
Resistance
Pattern
are in
non-shaded
areas.
per
1,000
hours
in
extended
load
life
testing
of
standard
Encapsulation:
High
Temperature
Silicone
Conformal.
Non-Inductive
Design
which
uses
a
serpentine
resistive
e-mail:
[email protected]
•
web:
www.caddock.com
Phone:
(541)
496-0700
Phone:
(951)
788-1700
�.015 .025 �.002
.094
©
2004
Caddock
Electronics, Inc.
28_IL118.1004
For
Caddock
Distributors
listed
by
country
see
caddock.com/contact/dist.html
For
Caddock
Distributors
listed
by
country
see
caddock.com/contact/dist.html
Fax:
(541)
496-0408
.313
�.020
Fax:
(951)
369-1151
Fax:
(541)
496-0408
Fax:
(951)
369-1151
Resistance
Range
Tolerance
IL-110.019
0.5
600 values.
200 �
5 Meg
N/A
750
N/A
MG650
Type
© (541)
2004 Caddock
Electronics,
Inc.1
28_IL118.1004
resistance
range
�.38)
(2.39
�.05)
(7.95 �.51)
For
Caddock
Distributors
listed
by country
see
caddock.com/contact/dist.html
Fax:
496-0408
(951)
369-1151
pattern
that(.64
provides
for neighboring lines toFax:
carry
current
in
Engineering
Sales
and
Corporate
Ofﬁce
Standard
�1%,
�0.5%,
�0.25%,
�0.1%
�.025
.109
© This
2004
Caddock
Electronics,
Inc.
28_IL118.1004
©Applications
2004
Caddock
Electronics,
Inc.
28_IL118.1004
.025 �.002
.313 �.030
performance
been
proven
through
opposite directions,
thereby achieving maximum
cancellation
Type
1
0.5exceptional
600 Hwy.
750
200has
�
8 Meg
N/A
N/A
MG655North
17271
1717 •
Chicago
Avenue
(7.95 �.76) (2.77 �.64)
(.64 �.05)
©
2004 CaddockUmpqua
Electronics,
Inc.
28_IL110.1004
Hurst
Green
•
Surrey
RH8
9AX
•
UK
many&years
of 97470-9422
use in equipment that demands the highest .500 �.030
St'd with
"-15" length
rating
�1% 92507-2364
of .094
ﬂux�.015
ﬁelds
over the
entire
of the
resistor.
This
UK
Ireland
Roseburg,
Oregon
Riverside,
California
.025 �.002
Type 1 including
1,000stability,
750
400 �TWT
Meg
N/AX-ray(12.70 �.76) (2.39 �.38)
N/A amplifiers,
MG660 0.6 and
Email • [email protected]
reliability
(.64 �.05)
efﬁcient
non-inductive
construction
without
e-mail:[email protected]
• web: www.caddock.com
Phone:
(541) 496-0700
Phone:�1%
(951) 788-1700
Extended
Range is accomplished
Distributors
�.015
For
Caddock
Distributors
listed by country
see.094
caddock.com/contact/dist.html
Web • www.rhopointcomponents.com
+44
(0)
870
1188
.750Tel:
�.030
.025
Fax:
(541)0.8496-0408
Fax: (951) 369-1151
systems,
geophysical
instruments,
and
derating
of 608
any�.002
performance advantages.
600
� medical
2,000
750
20electronics.
Meg
N/A
N/A
MG680
Type
1
CADDOCK
CAD
CADDOC
DOCK
K
CAD
DOC
K
CADDOCK
© 2004 Caddock Electronics, Inc.
1.0
4,000
Type 1
MG710
Max.
Overload
Model Watt-
750
Dielect.
800 �
50 Meg
N/AResistance
N/A
(19.05 �.76) (2.39 �.38)
(.64 �.05)
.094 �.015 .025 �.002
1.000 �.040
(2.39 �.38)
Dimensions
in inches
and (millimeters)
(25.40 �1.02)
(.64 �.05)
Temperature Coefﬁcient:
Resistance
Speciﬁcations:
Range
28_IL110.1004
TC Specifications
Page 2 of 2
Type MG Precision High Voltage Resistors
Type MG Precision High Voltage Resistors
Type 1776 Precision
Decade Resistor Voltage Dividers
New
Type Smaller
MG
Precision High
Type
High Voltage
VoltageResistors
Resistors
Models
Page 2 of 2
Page 2 of 2
Page 1 of 2
Lower Cost
New
Type MG Precision High Voltage Resistors
Page 2 of 2
Page21 of
of 22
Page
Input VoltageSmaller
Dividers
for Digital Multimeters and Range-Switching Instruments
Models
MG 650
Lower
Cost
Introducing
New
Smaller
Models
at Lowerand
Cost
Now
with Extended
Resistance
Range
to 10,000
Megohms
Additional Models
MG 655
Page 1 of 2
Temperature
Coefﬁcient
as tightofasthis
80 extensive
ppm/°C, Combined
Long-Term
Stability and
Precision
The exceptional
performance
family of with Excellent
There are
now 39 standard
models
in theTolerances.
expanded
MG 660
MG 650
TypeCaddock's
1776MGPrecision
Decade Resistor Voltage Dividers has
family
of Type 1776
resistor
networks
that include:
680 Micronox® resistance ﬁlms are the source of
Preconditioning
forprecision
Power
and
Voltage
Ratings
MG 655Now
with
Extended
Resistance
Range to 10,000
Megohms
and
Additional
Models
been
achieved
through
the
special
the Type
MG
Precision
High
Voltage
Resistors'
outstanding
All
power
ratings
and
maximum
operating
voltage
ratings
MG 710
• 3, 4, and
5Precision
- decade Tolerances.
voltage
MGb
660
ccombination
om
i n a t i oof
n Coefﬁcient
o f a d v a nas
tfeatures:
atight
g e s as 80 ppm/°C, Combined withare
Temperature
Excellent
Long-Term
and
for continuous
duty.Stability
These
ratings
are
based
on
performance
dividers with ratios from 10:1 preto
MG 712
®
V
provided
by
Caddock's
MG 680
stress
voltage levels
applied
manufacturing
® Tetrinox
• Single-resistor
values as
high as 10,000
Megohms.
Caddock's Micronox
resistance
ﬁlms9M
are the
source of
Preconditioning
for
Power
and during
Voltage the
Ratings
10,000:1.
V
resistance
ﬁ
lms.
This
advanced
=
V
process
to
provide
for
stable
resistor
performance
even
714
MG 710
1
•the
Maximum
continuous
operating
voltages
as high10
as
Type MG
MG
Precision
High Voltage
Resistors'
outstanding
All power ratings and maximum
operating voltage ratings
900K
Figure 1 provides
Figure 2 under momentary overload•conditions.
V
film
resistor technology
1,200Figure
volts 3continuous
ratings
=V 2
48,000
("-15"
ratings).
MG 712 volts
are for continuous duty. These
ratings
are based
on precombination
of
performance
features:
100
2.000 �.020
MG 715
�.020
1.500
1.700 �.020
90K
Maximum
operating
voltages
60%
than
thevolts.
values
the performance
characteristics
.090
(50.80
�.51) higher to
and
overvoltage
2,000
V
.090
(38.10 �.51)
.090
(43.18
�.51)
stress
voltage
levels
applied
during
the
manufacturing
•required
Overvoltage
capabilities
ofhigh
150%
of (2.29)
standard
working
(2.29)
=V 3
Single-resistor
values
as
as
10,000
Megohms.
(2.29)
1,000
listed
in
the
table
may
be
speciﬁed
by
adding
"-15"
toeven
the
MG 714
MAX.
by
the
precision
input
MG 716
MAX.
9K
MAX.
resistor
forcontinuous
all models
and
values, (except "-15"V ratings).
Figure
1
Figure 2 process to provide for stable
Figure
3 performance
•CADDOCK
ManyELECTRONICS
combinations
of Ratio
and
• voltages
Maximum
operating
as= V 4 ELECTRONICS
�.020
.680 that
model
number (Example:
MG750-15).
Note
overload
.680 �.020voltages as high
signal
circuits
of 1.500
both
bench-type
10,000 CADDOCK
.750
�.020
(17.27
�.51)
2.000
�.020
under
momentary
overload
conditions.
MODEL
1776-23
0419
1K
�.51)
(17.27
�.020 0404
1.700
MG 720 ("-15" �.020
MODEL
1776-1
MG 715 volts
Absolute
andresistors.
Ratio
• Resistance
from ±1.0% to
�.51)
(19.05overvoltage
.090
48,000
ratings).
(50.80
�.51) Tolerance,
and
ratings
do performance
not
apply
to the than
"-15"
.090±0.1%.
(38.10 �.51)
.090
(43.18 �.51)
and
laboratoryTolerances
digital
instruments.
Non-inductive
voltages
60%
higher
the(2.29)
values
PIN 1with Caddock's
(2.29)
Schematic
for Maximum
(2.29)operating
PIN 1
exclusive
design
MAX. are
and
Absolute
Temperature
• Temperature
Coefﬁcient,
for
standard
resistance
range,
of
Overvoltage
capabilities
of
150%
of
standard
working
MAX.
PIN
1
Resistance
ranges
for
"-15"
resistors
shown
in
the
table
MAX.
MG 716
MG 725
listed in the table .100
may beCADDOCK
speciﬁed
by adding
"-15" to the
Model 1776-C68
Inppm/°C
addition
to
requiring
less
.680 �.020
ELECTRONICS
.100 forin
.680
�.020
Coefﬁ
cient.
80
combination
with
resistance
tolerances
as
voltages
all
models
and
values,
(except
"-15"
ratings).
CADDOCK
ELECTRONICS
from
"-15
Min."
to
"Standard
Max."
.750 �.020
(2.54)
.100
(17.27 �.51)
MODEL
1776-23
0419
(2.54)
(17.27 �.51)
MODEL 1776-1
0404
model
number (Example:
MG750-15).
Note
that
overload
.250 �.050
(19.05 �.51)
(2.54)
MG 720
board
these compact
.250 �.050
.800 (20.32)
asspace,
±0.1%.
.900 (22.86)
MG 717
(6.35 �1.27)
.250 �.050 Performance
Non-Inductive
• tight
Resistance
Tolerances
from
±1.0%
to ±0.1%.
(6.35 �1.27)
.900 (22.86)
PIN
1
Non-inductive
performance
1.000
(25.40) apply to the "-15" resistors.
PIN 1
and
overvoltage
ratings
do
not
(6.35
�1.27)
1.100 networks
(27.94)
Most
models
are
available
with
For
complete
information
on
quantity
price
and
delivery,
pre
ci
sion
resistor
deliver
higher
performance
than
PIN of
1
with Caddock's exclusive design
1.200 (30.48)
•• Type
MG resistors
have demonstrated
stability
0.01%
.025 �.002
1.200 (30.48)
Most models
are
manufactured
with
Caddock's
1.300 (33.02)
.025standard
�.002
MG 725 .100
Temperature
Coefﬁcient,
resistance
range,
of(35.56)
.100
Resistance
rangesOfﬁ
for
"-15"
resistors
shown
the
1.400
�.05)
DIA. table are
(.64in
.025 �.002
Non-inductive
Serpentine
Pattern
contact
our Caddock's
Sales
1.500 (38.10)
selected
discrete
resistor
setsfor
and
thin-ﬁ
networks.
(.64
�.05)
DIA.
(2.54)ce.
.100standard
per
1,000
in extended
load
lifelm
testing
of
Tinned Copper resistive
(.64 �.05) DIA.
(2.54)MGhours
1.500
(38.10)
721
Non-Inductive
Design
which
uses
a
serpentine
Tinned
Copper
.250 �.050
80 ppm/°C
in.900combination
with
resistance
tolerances
as
(2.54)
1.800 (45.72)
from
Max."
.250 �.050
.800 (20.32)
Tinned "-15
Copper Min." to "Standard
(22.86)
(6.35 �1.27)
.250 �.050
(6.35 �1.27)
.900 (22.86)
resistance
range
values.
MG 717as ±0.1%.
Ratio Stability
1.000 (25.40)
pattern
that
provides
for
neighboring
lines
to
carry
current in
Voltage
1.100 (27.94) Values
(6.35
�1.27)
tight
R
R
R
R
Resistance
R
R
R
R
R
R
R
TC
Ratio1.200 (30.48)
Ratio Non-Inductive
Absolute
Performance
%
Changemodels
in Ratio 1.200
.025 �.002 R
Most
are
available
with
(30.48)
Coef.
1.300 (33.02)
.025 �.002 hasVoltage
Temp.
Tolerance
Tolerance
TC opposite
RATIO
DEFINITION:
This
exceptional
performance
been
proven
through
RATIO
DEFINITION:
RATIO
DEFINITION:
Abs.
TC
thereby
achieving
maximum
cancellation
1.400
(35.56)
MGresistors
730
(.64 �.05) DIA.
.025 �.002ofdirections,
Ratio Load Shelf
• Model
Type
MG
have
demonstrated
stability
of
0.01%
1.500
(38.10)
No.
(.64 �.05) DIA. Fig. Rating
OverMost
models
are
manufactured
with
Caddock's
Range
%
%
ppm/�C
ppm/�C
Speciﬁ
cations:
Tinned
Copper
�.05)
DIA.
(.64
Caddock's
Non-inductive
Serpentine
ALL
RESISTORS
RATIO
1.500
(38.10)
ALL
RESISTORS
RATIOin
ALL RESISTORS
RATIO
ppm/volt
Copper
(45.72)
Voltage
Life Life
many
years
of Ruse
that
demands
the 1 highest
7
R1 hours
2
3 equipment
R4 Tinnedload
R
5
of
ﬂux
the
entire 1.800
length
of 2the3 Pattern
resistor.
This
MG 721
2
per
1,000
in Rextended
life
of standard
4testing ONE
1
2
3
1 Tinned
22 Copper
3 ﬁelds
4 3 5 over
6
4
5 resistive
1 serpentine
ONE
ANOTHER
ONE
ANOTHER
ANOTHER
Non-Inductive
4Design
5
6which uses a
R
R
R non-inductive
R
reliability
and
stability,
including
amplifiers,
X-ray
R
R TWT
R
efﬁcient
construction
is
accomplished
without
R
R
R
R
R
(
N
u
m
b
e
r
s
i
n
s
i
d
e
c
i
r
c l eins
resistance
range
values.
MG 735
for
neighboring
lines
to carry current
Range 1 that
RATIO
DEFINITION:
90 K
900
0.1
30
10 pattern
0.003
0.005
0.1
0.04 provides
10 1200
RATIO
DEFINITION:
RATIO
DEFINITION:
1776-C67
900 K
9 geophysical
Meg
Figure
49 K
Figure 5
Figure
6 columns
systems,
instruments,
and
medical
electronics.
derating
of
any0.01
performance
advantages.
reference
in
Model
No.
MG
730
This
exceptional
performance
has
been
proven
through
ALL
RESISTORS
RATIO
ALL
RESISTORS
RATIO
ALL RESISTORS
RATIO
opposite
directions,
thereby
achieving
maximum
cancellation
1.700 �.020
1.20030
�.020
1.400 �.020
1776-C671
9 Meg
900
K �.51)
90 K
9K
1200
0.1
0.05 (30.48
10 1 Range
0.01 0.003 0.005
1900 2 10
3 .090
4
2 13 .100
40.04 5
(43.18
.100
�.51)
1
2
3
�.51)
4
5
6
ONE ANOTHER(35.56 table)
ONE ANOTHER
ONE
ANOTHER
many
years
of
use
in
equipment
that
demands
the
highest
(2.29)
of
ﬂux
ﬁelds
over
the
entire
length
of
the
resistor.
This
(2.54)
(2.54)
MG 745
1776-C6715 9 Meg
900 K
90 K
9K
1200
0.1
30
5 in Range
0.01 0.003 0.005
900
0.05
10 MAX.
0.04
MAX.
Dimensions
inches1andMAX.
(millimeters)
Speciﬁcations:
Max.stability,
reliability
TWTResistance
amplifiers, X-ray
efﬁcient
non-inductive
construction
is 46Tolerance:
accomplished
without
Overload
Model
Dielect.
Figure 4including
Figure 5 .550
Figure
MG 735Watt- and
�.020
.550
�.020
6
5
3
2
7
1
Ratio
Maximum
Continuous
1776-C68
9 Meg
900 K
30
10(13.97Range
90
K
9Strength
K .7501�.020
K Min.
0.1
Standard
Extended
0.1
10 1200
0.04 C 0.01 0.003 0.005
-15
Rating
�.51) B1
No.
age
A
(13.97 �.51)
1.700
�.020
1.200
�.020
1.400
�.020
systems,
geophysical
instruments,
and
medical
electronics.
Oper. Volt.
Resistance
Tolerance:
(19.05 �.51)
derating .100
of any performance
advantages.
Max.
Max.(30.48 �.51)
Min.
.090
PIN 1
PIN 1
tio error. (See .100
the specific
MG 731 (43.18 �.51)
(35.56 ra
�.51)
IN
IN
OUT
IN
IN
IN
CADDOCK ELECTRONICS
MODEL 1776-81
0408
OUT
OUT
OUT
N
N
CADDOCK ELECTRONICS
0408
MODEL 1776-81
1
New
1
3
2
3
9 Meg
MG650
MG 745 0.5
1776-C6815
9 Meg
PIN 1
900 K
600K
900
90 K
Type
90
K 1
1
2
3
4
1
2
3
4
CADDOCK
0417
1776-C54
CADDOCK ELECTRONICS
MODEL 1776-10
0402
1776-C681
New
2
9K
1K
1200
10 (2.29)
� MAX.
N/A
9 K 750 1 K200 10
1200
0.1
5 Meg
.050
0.1
(1.27)
Resistance
0.05
N/A
0.05
30
1
2
3
4
5
1
2
3
4
5
CADDOCK
0411
1776-C62
10
.313 �.020
Range 1
.094
0.04
�.015(2.54).025
MAX.
0.01 0.003
�.002
0.005
(2.54)
Resistance Range
Figures for theTolerance
Ratio
Deﬁnition).
MAX.
.050 0.005
(2.39 �.38)
Range
1
0.04
30 (7.95 �.51)
5
0.01 0.003
(.64 �.05)
.550 �.020
Speciﬁcations:
(1.27)
.550 �.020
CADDOCK
Dimensions
in inches and (millimeters)
1 2
1776-C62
(13.97 �.51)
�.51)
Standard
�1%,
�0.25%,
�0.1%
6 �0.5%,
5 (13.97
4 Temperature
3
7
1 041
.109 �.025 0.03
.600 (15.24)30 .313 10
�.002
Ratio
Coefﬁ
cient:
.700
(17.78)
.010
�.002
.025 �.002
�.030
0.1
0.1
Range 1 .010
0.01 0.003
8 PIN
Meg1 Extended
N/A
PIN 10.005 .900 (22.86)
Standard
(.26 �.05)
.800 (20.32) (7.95
A �.76) (2.77B�.64)(.26 �.05)
(.64C�.05)
Resistance
Tolerance:
Maximum
ra
tio
TC
error.
(See
Max.
Max.
St'd
with
"-15"
rating
�1%
1
Range
30
10
0.01 0.003 0.005 1.000 (25.40)
0.03
0.1 .050 0.05.900 (22.86)
�.015
.094
.050
.025
.500
�.030
�.002
.020 �.002.094 �.015
.150 �.040
.020 �.002 Figures
.150 �.040 for the
1.100
(27.94)
the specific
10 (1.27)
Meg
N/A1.100 (27.94)
.025
.313 �.76)
�.020
�.002
Resistance
Range
(1.27)
�.38)
(2.39 (3.81
(.51 �.05)
�1.02)
(.51 �.05) Tolerance
�1.02)
(3.81
�.05)
(.64
5 Meg 0.05
N/A
0.005
Range
1
0.1
5
30 (12.70
0.01
0.003
0.03
Extended
Range
1.300
(33.02)
(7.95 �.51) (2.39 �.38).010 �.002
(.64 �.05)
.600 (15.24)
(.64 �.05) DIA.
.700 (17.78)
�.002
1.100 (27.94)
Ratio Deﬁnition).�1%.010
(2.54)
.094 �.015(.26 �.05)
.750 �.030 Range
.025 �.002
Copper
(.26 �.05)�0.1%
MG 750
.800 (20.32)
.900 (22.86)
Standard
�1%, �0.5%, �0.25%,
�.025
.109 �.38)
1776-C61
1200
0.1Meg
30 .313 10
0.1
0.1.025 �.002
0.01 0.005 0.01
9 Meg
900
K (33.02)
90
K
9 K Tinned
2
1.300
600.250
�6 �.050
2,000
750 900
20
N/A
N/A
MG680 0.8
Type
�.030 (2.39
.700
(17.78)
(19.05 �.76)
(.64 �.05)
Type 11
600
750
200
�
8
Meg
N/A
N/A
Range
1:
-40°C
to
+85°C.
MG655
MG 740 0.5
.900
(22.86)
�1.27)
(6.35
1.000
(25.40)
Temperature
Coefﬁcient:
(2.77
�.64)
(7.95 10
(.64 �.05)
�.76)
1.400
(35.56)
(20.32)
Range 2.150 �.040
.020 �.002
.020 �.002
.150 �.040
1776-C611
9 Meg .800
900
K
90 K
9K
900
6
1200
0.1
0.05 1.100 (27.94)
30
0.1
0.01 0.005
1.100 (27.94)
�.015�1.02)
St'd0.01
with "-15"
rating
RATIO
DEFINITION:
Where
RT =2:
R10°C
+ R2 +to
R(3.81
3�1%
+ R�1.02)
4 + R5
1.000 �.040
�.002
(38.10)
Range
+70°C.
1.0001.500
(25.40)
(.51 �.05).094
(.51
�.05)
.025 �.002
�.015 .025
.094 (3.81
1.0
4,000
750
800 �
50 Meg
N/A
N/A
Type 1
MG710
.025 �.05)
.500�1.02)
�.030
�.002
1.300
(33.02)
(2.39
Resistance
Type
11 9 K (.64
�.05)
DIA.�
750
10 Meg 0.1N/A
N/A
MG660 0.6
RATIO
1 (R2 + R
3 + R4 + R5):RT TC Specifications
2 R3 0.1
RRange
1 (2.39
R2 �.38)
R4 (.64
1.100K(27.94)
1776-C62
9 Meg 1,000
900
90
K R
1 K 400
6 R1200
0.1
30(25.40
10
0.01 0.005
0.01
�.38)
R
3
4
R
2
�.76)
�.05)
(12.70
(.64
R
3
R4 R5
R
1
R
2
MG 780 1.300 (33.02)
Tinned Copper
Extended
Range
�1%
6
4):RT5
3+ RVoltage
7
1(R3 2+ R
Range
RATIO DEFINITION:
Coefficient
of Ratio
RATIO DEFINITION:
RATIO
2
4
5
�.030
.140
.400 �.060 Range
.025 �.002
2
.094 �.76)
�.015
1776-C621
9 Meg 1,000
9001.400
K (35.56)
90
K 2 9 K 750 1 K 800 �
6
1200
0.1Meg 0.05
30 .750 10
0.1.025 �.002
0.01 0.005 0.01
Type
20
N/A RATIO
N/A
MG712
�.030 (3.56
MG 750
ALL0.6
RESISTORS
RATIO
ALL
RESISTORS
RATIO
3 (R4 +
R5):RT(ppm/volt): R1 in series with any
(10.16 �.152)
(.64 �.05)
600 �
0.8
2,000
750
20 Meg
N/A
N/A
MG680
Type 1
Standard
and
(2.39
�.38)
(19.05
(.64
�.76)
�.05)
RATIO
DEFINITION:
Where
R
T
=
R
1
+
R
2
+
R
3
+
R
4
+
R
5
Temperature
Coefﬁcient:
�80 ppm/�C
from3 -15�C
to +105�C,
(38.10)
ONE 9ANOTHER
2
2.150 3�.030
4 0.1
5 �.002
ONE
5
6 6 7 1200
8
29 K3
41 K
RATIO
4with
(R5"-15"
):RT
1776-C6217
Meg
900 1.500
K
0.02
30 .562 �.060
10 1 Range
0.01 0.005
90 K1
0.1 ANOTHER
6
1
2
St'd0.01
.032
of
R24, R53, R
4, and
.094
�.015
4 +
R5):RT R1to R
R2 �.76)
R3 R4.025 �.002 RATIO 1 (R2 + R3 + Rcombination
1.0
1,000
750
200
20 Meg
N/A
6.5
Meg
MG714
Type 2R1
1.000 �1.52)
�.040 R1(3.81
referenced
+25�C.
R2
R3 �
RN/A
4
2
R3 R4 R5
�.05)
(14.27
(.81
MG
785
1.0
4,000
750
800
�
50
Meg
N/A
Type
1
MG710
rating
(2.39 �.38)
Resistance
RATIO
DEFINITION:
1776-C742
9 Meg
900 K
90 K
9K
1K
7
1200
0.25
0.25
50(25.40 �1.02)
50
0.5(.64 �.05)
0.04 0.02
0.04
2
Range
RATIO DEFINITION:
RATIO
2 (R3 + R4 + RR
5):R
5, T100 volts
to
rated
voltage.
TC
Specifications
Figure
7
Figure
8
Figure
9
�.030
.140
.025
.750
�.060
�.002
MG 780
ALL
RESISTORS
RATIO
Range
ALL
RESISTORS
RATIO
RATIO0.04
3 (R4 + R5):RT �80 ppm/�C from +25�C to +105�C,
�.030
.140 �.76)
50
Meg
N/A 1.500
26
Meg
MG715 1.0
Type
2
Range
.400 �1.52)
�.060
�.002
1776-C74
9 Meg 2,000
9001.600
K �.020
90
K 22 9 K 750
1 K 400 �
7
1200
0.1
0.1
50(19.05
50
0.5.025
0.04 0.02
(3.56
�.020
�.020
(.64
6
5
4
3 1.600
7
1Extended
Type
0.6
1,000
20 Meg
N/A
MG712ONE
ANOTHER
Life:
Ratio
of
1
2
3�.76)4 .100
5 �.05)
ONE
ANOTHER
(3.56
4 2(R5):R
T(40.64 Load
2 3 7504 5 8006� .100
7 N/A
8
�.05) RATIO
(.64
1
2 to +50
3
4
5stability
6
.100
(40.64 �.51) 1
�.51)
�.51) �.152)
(38.10 (10.16
-200 ppm/�C
ppm/�C
from
Standard
and
2
Range
.140 �.030
(2.54)
Range
1776-232
9 Meg
900 K
3 (2.54)
1200
0.25
50 1.000 �.060
50
0.3
0.04 0.02 0.04
90 K
9K
900
0.25
(2.54)
�80
ppm/�C from
-15�Cfull
to +105�C, at
.025
�.002
sis tance
under
�.030 MAX.
.150 �.76)
to +25�C.
Type 2
600 � MAX.
4,000
750
75 Meg
N/A
70 Meg
St'd with "-15" re-15�C
MG716 1.5 MG 810
.562 �1.52)
�.060 (3.56
�.002
.032
MAX. load
Page
1
of 2
�.05)
(.64
(25.40
1.0
1,000
200 � 6.5 Meg
20 Meg
N/A
MG714
Type 2 7 750
referenced
to +25�C.
Figure
Figure
8
Figure
9rated
(3.81
�.76)
(14.27 �1.52)
1776-23
K
90 K
9 K .550 900
3
1200
0.1
0.1
50
50
0.2(.81 �.05)
0.02 0.01 0.02
2
Range
�.020
rating
.550
�.020
CADDOCK
MG 785 9 Meg 900CADDOCK
+70°C,
voltage applied to
CADDOCK
.600 �.020
�.030 .040 �.002
.240
04031.600
1776-C73
0420 1.500
1776-C34
.710 �.050 (13.97
(13.97 �.51)
�.51)
0405
�.020
�.020
1.6001776-C10
�.020
�.51)
(15.24
Insulation
Resistance:
10,000
Megohms,
min.
�.030
.140
1.5
2,000
750
600
�
75
Meg
225
M
17
Meg
Type
2
MG717
.025 �.05)
.750 �1.27)
�.060
�.002
2
Range
1776-242
9 Meg 2,000
900(40.64
K
3 .100
1200
0.25
50(18.03
50
0.3
0.04 0.02
90
K 2 9 K 750 1 K 400 �
0.25
.100
(6.10 �.76)
1�80
in ppm/�C
series from
with+25�C
any .100
combination
PINMeg
1
�.51)
(40.64 R
�.51)
�.51)
(1.02
50
N/A (38.10
26 Meg
MG715PIN 11.0
Type
to +105�C,
PIN 1 0.04
(2.54)
(19.05 �1.52) (3.56 �.76) (2.54)
(.64 �.05)
(2.54)
Extended
Overload/Overvoltage:
times
rated
power
+50Rppm/�C
from
.140 �.030
MAX.2000
R3, R4,5toand
5 for
hrs.
of-200
R2, ppm/�C
MAX.
.025 �.002
Range
2
1776-24 .050 9 Meg
900 K
90
K 2 9K
1K
3 MAX.
1200
0.25
0.1
50 1.500 �.080
50
0.2
0.02 0.01 0.02
.050
.140
�.030
Range
Type
6,000
750
1
K
150
Meg
N/A
N/A
MG720 2.0 MG 815
.050
.025
�.002
1.000
�.060
�.76)
(3.56
.550 �.020
�.020
(.64 �.05)
(38.10 �2.03) .550
-15�C
+25�C.
(1.27)
(1.27)1.5
600 � 70 Meg
4,000CADDOCKType 2
750
75
Meg
N/A CADDOCK
MG716
CADDOCK
.600
�.020 1.5 times maxwith
applied
voltage
notto to
exceed
(1.27)
�.76)
(3.56
MG 810
(.64 �.05)
(25.40 �1.52)
0403K
1776-C73
0420
1776-C34
6
4 0405 5
3
2 0.02
7
1
Range
2
(13.97
�.51)
(13.97
�.51)
1776-241
9 Meg
900
3
1200
0.05
50
50
0.2
0.02
0.01
90
K
9
K
1
K
0.25
1776-C10
(15.24
�.51)
Shelf
Stability
of
Ratio:
Six
.700 (17.78)
.700 (17.78)
.010 �.002
.240 �.030 .010
.700 (17.78)
.040�.002
�.002
1.000 �.050
1
PIN
1
imum
continuous
operating10,000
voltageMegohms,
for.010
5 �.002
seconds.
�.030 (.26
.240 �.76)
�.05)
PIN
1
4,000
200 �4 (.2651
Meg
300
Meg 100
MG721 PIN2.0
.900M
(22.86)
Type
.040�.05)
.710 �.050
�.002
(22.86)
(.26 �.05)
Insulation
Resistance:
min.
(6.10
1776-105
9 Meg .900
900
K
1200
30(25.40
5
0.02
0.01 0.005
0.01.800 (20.32)
90
K 22 10 K 750
2
Range
months
at
shelf
conditions.
�.05)
(1.02
�1.27)
1.5
2,000
750 N/A 600 �
Meg 0.1
225
M
17 Meg +0,75-0.5
Type
MG717
�.76)
(6.10
1.100 (27.94)
(18.03 �1.27)
(1.02 �.05)
1.100 (27.94)
Type 1: 1.000
DC (25.40)
Voltage
.050
.050
® resistance
.020
�.002
.050 Power and Voltage
.150 .025
�.040�.002 for
�.002
�.040
.140 �.030
Caddock's
Micronox
ﬁlms
are
the
source
Preconditioning
2.000 �.080
.020 �.002
.150 rated
�.040
1.200 (30.48)
1.300
Overload/Overvoltage:
5Ratings
times
power
1776-C10
9 Meg 10,000
900
K(33.02)
1200
0.1
30 of
10 (.51
0.02
0.01
90
K 2 10.020
K 750
N/A 1.5.150
+0,
-0.5
Range
2 (3.81
(1.27)
(27.94)
7
2(1.27)
3 0.01
4 1.100
5
6
1 0.005
.140
�.030
2.5
K9 �1.02)
200
Meg
N/A
N/A
Overvoltage:
MG725 (1.27)
Type
�.05)
�.002
.025
1.500 �2.03)
�.080
�1.02)
(.51
�.05)catalog
products
shown
in
this
are
covered
by
one or
more
there
are
also
patents
pending.
(.51AC
�.05) Maximum
(3.81 �1.02) voltage
Type
2:
DC
Voltage
or Vrms
�.76)
(3.56
�.05)
(.64�.002
(50.80
Type
2 High
750
1(3.81
K .010
150
Meg
N/A
N/A
1.300patents,
(33.02)
MG720
1.500
(38.10)
MGType
815 2.0Certain
.700
(17.78)
.010
.7006,000
(17.78)
1.300voltage
(33.02)
�.002
�.76)
(3.56
the
MG
Precision
Voltage
Resistors'
outstanding
All
power
ratings
and
maximum
operating
voltage
(.64
�.05)
�2.03)
(38.10
.700
(17.78)
.010times
�.002ratings
with
applied
not
to exceed
1.5
maxRange 2
1776-C105 9 Meg .900
900
K
90 K
10 K
N/A
9 (.26
1200
+0, -0.5
0.1
30
5
0.02
0.01 0.005 0.01
of
1.67
times
rated
DC
voltage.
(.26 �.05)
(35.56)
�.05)
.900 1.400
(22.86)
(22.86)
1.400
(35.56)
.240
�.030
�.05)
(.26
.040 �.002
1.500 �.080
.800 (20.32)
.240for
�.030 continuous
Resistance
Range
Overload/Overvoltage,
�R pre1,000
500 � 77 Meg 250 Meg
M (27.94)
6,000
7501.100
MG730 3.0
.040 �.05)
�.002
1.000 �2.03)
�.050 are
Type 2
duty.
These
ratings
are
based
on
imum
continuous
operating
voltage
for
5
seconds.
combination
of
performance
features:
�.76)
(6.10
1.500
(38.10)
Range
2
(1.02
(38.10
1.000
(25.40)
2.0
4,000
200
�
100
Meg
300
M
51
Meg
MG721
Volts
DC
or
peak
AC
applied
to
Type
1776-1
9 Meg 1.100
900 (27.94)
K
2
1200
0.05
30
10
0.02
0.01
0.005
0.01
90
K 2 10 .020
K 750
N/A
0.25
.020(6.10
�.002 �.76).150(1.02
�.040 �.05)
�.002
�.040
(25.40 �1.27)
.020 �.002
.150 �.040
1.200 (30.48)
1.300±(33.02)
RATIO DEFINITION:
R3 R.150
4 B R5
R1(.51
2
1.100 Voltage
(27.94) during
1.500
.125
A R�.05)
�.05) �.030
(.51
(3.81
�1.02)�.002 levels
Type
1:applied
DC
R
3max.
R4 Page
R1 any
2 0.5%
stress
voltage
manufacturing
Standard
(3.81
�1.02)C
.315
�.05)
(.51Rthe
1.000R1�.060
.040
(3.81
�1.02)
R1 and
combination
of R1 2of, 2
2
Range
1.300
(33.02)
Single-resistor
values
highN/Aas
1.500
(38.10)
.140
�.030
1776-14
9 Meg (38.10
900
K±
90
K 2as
10 1,000
K
1200
0.25
10
0.02
0.01
0.005
0.01
1.300
(33.02)
MegMegohms.
2.6
4,000
200 10,000
�2 40
150
Meg1 0.1
750
Type
MG731
3.18)
�.002
.025
2.000
�.080
RATIO
R1M
:R2 30
(8.00 �.76) (1.02 �.05)
(25.40 �1.52) process
2.5 DEFINITION:
750
1.5 K
200 Meg
10,000
N/A 1.400 (35.56)
N/A
MG725RATIO
Type 2
stable
performance
Type
2: DC
Voltage
or4,Vand
R2(3.56
5(.64 provide
Rpatents
3 �.76)
R4 Rto
1.400
(35.56)
DEFINITION:
�.05) RATIO
R3resistor
,R
R5 in
R1
Certain 9.9
products
inKthis
catalogN/A
arevoltages
covered
one
or more
there�2.03)
are also
pending.
rmsAC
St'dfor
with
"-15"
rating
N/Aseries witheven
RATIO
2as
R1:R3 30(50.80
Maximum
operating
high
1776-8
Megcontinuous
90shown
K
10
N/A
1
1200byas
0.25
0.1patents,
25
0.2
0.02 0.01
0.02
2
Range
.240 �.030
.040 �.002
2.000
�.080
(38.10)
6 Meg
4 �5 178
2
3 750
RESISTORS
ALL
RESISTORS
RATIO
.240
�.030
immediate
assistance
in1.500
developing
RATIO
R1:R
5
6 TC
7
8matched
1
2 Low
3
4 Ratio
under
momentary
overload
conditions.
10,000RATIOType 2 1 1,000
300
Meg3 1,000
M 4For(50.80
MG735ALL3.6
�.002
.040
1.500
�.080
for 10
seconds.
1
2
4 engineering
3
7 �.05)
6 (1.02
�.76)
(6.10
Resistance
Range
Overload/Overvoltage,
�R
Range
25
MegDEFINITION:
750 M 30(38.10R�2.03)
RATIO
77
Meg 250
MG730
R11,000
R2 N/A
R3500R�
41
R1200
5
Type
2 (MILLIMETERS)
Extended
Range
0.8%
max.
48,000
volts
("-15"
ratings).
1776-9
9.9
Meg 6,000
90
K
0.1
10
0.02
0.01
0.005
0.01
10
KAND
N/A
0.25
1
�.76)
(6.10
ONE3.0
ANOTHER
ONE
ANOTHER
R
1
R
2
R
3
R
4
DIMENSIONS
IN INCHES
�.05)
�2.03)
RATIO 4
R1:R5 voltage
high
resistor
sets,(1.02
call
or
write
our
Applications
and
we
will
operating
60% Engineering
higher
than
RATIO 1
R1:R2
.315Maximum
�.030
6
5 voltages
4
3
2
7
1�.002
.040
1.500 �.060
2 R4 0.02
Range
Voltage
Rating:
DCthe
or values
RMS
Standard
0.5% max.
�.030
.315
1776-91
9.9 Meg
90
K
1 standard
1200
30 1.000 �.060
10
0.01 0.005
0.01
10
N/A
N/A300 �
0.25working
Overvoltage
capabilities
of
150%
of
64
Meg 300
3.6
1,000
Meg 2 0.05
1,500
M
Type
MG740
�.002
.040
R2(8.00
R3 �.76)
R
5
RATIO
DEFINITION:
1.500
.1256,000
AK 22 10
RATIO
R1M
:R3pleased
Thermal
Shock:
Mil-Std-202,
Method
107,
(1.02
�.05)
(38.10 �1.52)
2.6 ±DEFINITION:
4,000
1,000 B 200 C
� 40 Meg 150
Meg
750
Type
MG731RATIO
Figure
11adding
Figure
be
to
offer
the
best
solution
from
our
high
voltage
resistor
product
listed
in
the
table
may
be
speciﬁed
by
"-15"
to
�.76)
(8.00
(25.40
�1.52)
�.05)
(1.02
±
3.18)
(38.10
AC 1 voltage
R 1 the
in
1and
2 values,
3
4 15 (except
6
1.200 �.020
ALL
RESISTORS
ALL
RESISTORS
RATIO
25
RATIO 3ratings).
voltages
for1.000
all
models
"-15"
2 3
4 applied
50.110
6 7 to
1776-912
9.9
Meg
90
KRATIO
10 K
N/A
N/A
1200
0.25
0.02R1:R4 30 3.000
52 3 Range
0.02
0.01 0.005
0.01
Derating
Curve:
100
St'd
withC,
"-15"
rating
N/A
.240
1 �.100
4 �.030
6
7 �.002
�.020
Cond.
ΔR
0.25%
max.
.040
(30.48
�.51)
capabilities.
number
MG750-15).
Note
that 8overload
.240 �.76)
�.030
0.110
5.0ANOTHER
15,000�.51) Type 2 801,000
1 K 288 Meg 500
Meg 4 1,500
M 5 (76.20
MG745 ONE
ONE ANOTHER
�.002(Example:
.040 �.05)
2.000 �2.54)
�.080 model
(2.79)
(25.40
RATIO
R
1:R
se
ries
with
any
combination
of
(6.10
(1.02
®
3.6
10,000
1,000
750
�
300
Meg
1,000
M
178
Meg
MG735
Type
2
(2.79)8 ﬁlms
2
Range
Caddock's
Micronox
resistance
are
Power
and
Voltage
Ratings
(6.10 �.76)
1776-C4
10 Meg 1.1111M
101.01K 10.01K
1.0001K
1200
0.25the source
0.25
30of
10 Preconditioning
0.1
0.01 for
0.005
0.01in developing
Max.max.
(1.02
�.05)
�2.03)
(50.80
For
immediate
engineering
assistance
Low
Ratio
TC
matched
Resistance
Tolerances
from
±1.0%
to
±0.1%.
Extended
Range
0.8%
Moisture
Resistance:
Mil-Std-202,
Method
106,
and
overvoltage
ratings do
notRapply
to
the "-15"
resistors.
Max.
0.530
�.020
2, Figure
R
3, R
4,
5.
CADDOCK
.315 �.030
.040 �.002
2.125 �.060 Range
RATED
POWER
DIMENSIONS
INMG
INCHES
AND (MILLIMETERS)
11and R
Figure
1060�.020
0.530
2 power
.315
�.030
CADDOCK
the
Type
Precision
Voltage
Resistors'
outstanding
(13.46
�.51)
All�.76)
ratings
and
maximum
operating
voltage
ratings
5.0
1,000
400 �8 128
2,500
M of
10,000
Meg 500
0417
1776-C48
MG750
Type 2OR
�.002
.040 or
1.500
�.060
1776-C44
10 Meg
1.1111M
101.01K
1.0001K
1200
0.1Meg
0.1 voltage
10
0.1:
0.01
0.005
0.01
high
resistor
sets,
call
write
our
Applications
Engineering
we
will
(8.00
RATED
VOLTAGE,
%High
ΔR
0.4%
max.
Temperature
Coefﬁcient,
for
standard
resistance
range,
See the
Leadand
Form
1.200
�.020
40
�.05)
�1.52)
Meg 300
3.6
1,000
300 � 64
Meg
1,500
M 30(53.98
�.51)
Type (13.46
2 10.01K
MG740
Resistance
for
"-15"
resistors
shown
in
table
are
04176,000
1776-C68
-100M
- Mil-Std-202,
1%
�.76) (1.02
(8.00
1 MG750
Shock:
Method
107,
0.110
1.000 �.020
(1.02ranges
�.05) PINThermal
(38.10 �1.52)
See Lead Form
Detail
Note.
(30.48
�.51)
Lead
Form
Detail
Note:
Lead
Storage
Temperature:
-40°C
PIN
1
0.110
are
for
continuous
duty.
These
ratings
are
based
on
pre2
Range
combination
of
performance
features:
20 with
(2.79)
�.51)101.01K 10.01K
.315
�.030
Detail
1776-C441
10 Meg (25.40
1.1111M
1.0001K
8 Note.
1200
0.1 be0.05
30 3.125
10offer
0.1
0.01to0.005
0.01
pleased
to
the
best
solution
from
our
high
voltage
resistor
product
.040
�.060
�.002
80
ppm/°C
in
combination
resistance
tolerances
as
from
"-15
Min."
"Standard
Max."
Load
Life:
1,000
hours
at
+125°C
at
rated
(2.79)
.240 �.76)
�.030
Type
2
192
Meg
ΔR
0.25%
max.
Cond.
C,
7.5
15,000
1,000
600
�
750
Meg
3,750
M
MG780
Model
Number:
Tolerance
Max.
.040
�.002
3.000
�.100
form
detail
provides
interference
.050
(8.00
toduring
+85°C.
Derating
Curve:
(79.38 �1.52)stress
(1.02 �.05) levels applied
100
5.0
15,000
1,000
1 K 288 Meg 500 Meg
1,500 M
MG745 .050
Type 2 10.01K
Max.
voltage
0.530 �.020the manufacturing
(6.10 �.76)
CADDOCK
Range
2
(1.02 �.05)
1776-C34
10 Meg
1.1111M
101.01K 0.530
1.0001K
8125 1200
0.25
50(76.20 �2.54)
50
0.5
0.04 0.02
0.04 not
(1.27)
tight(1.27)
as
±0.1%.
25
75 10,000
175 Megohms.
225 0.25
275 capabilities.
Single-resistor
values
as 0�.020
high
as
voltage,
to exceed
rated
power.
0.010 �.002
CADDOCK
(13.46 �.51)
1776-C48
Non-Inductive
.5000417
(12.70)Resistance:
80
Resistor
.315achieve
�.030
Moisture
Mil-Std-202,
Method
106,
in the
circuit
board
hole
to
0.010 �.002
.040Value:
�.002Performance
4.000 �.120
See�.05)
Lead
Form
(0.25
�.51) AMBIENT
(13.46 1,000
0417
.500
(12.70)1776-C68 Type 2
process
to
stable
resistor
performance
even
TEMPERATURE,
°C0.25Meg 0.25
.315
�.030
8.0
20,000
800See
�
1,000
5,000
M 25
320
Meg
MG785
PIN
1 for
�.002
.040provide
2.125 �3.05)
�.060
Lead
Form
.700
(17.78)
�.05)
(0.25
1776-C532
900
K
90
K
9
K
900
N/A
5
750
25
0.4
0.02
0.01
0.02
2
Range
Detail Note.
�.76)
(8.00
Lead
Form
Detail
Note:
Lead
Type
MG
resistors
have
demonstrated
stability
of
0.01%
�.05)
(1.02
(101.60
Maximum
continuous
operating
voltages
as
high
as
60
1,000
400
2,500 M mount
� 128 Meg 500 Meg
10,000
MG750 PIN5.0
1
.600
(15.24) OR Type 2
Most
models
are
manufactured
with
Resistance
Range
Load
Life,Caddock's
�R
�.76): (1.02
(8.00
ΔR
0.4%
max.
RATED
POWER
a vertical
theunder
device.
Detail Note.
�.05)
(53.98of
�1.52)
.800
(20.32)
momentary
overload
conditions.
.700
(17.78)
0.020
�.002
RATED
VOLTAGE,
%
40
.315
�.030
form
provides
.050MG750
.040 �.002
5.000 �.120
.150 �.040
(22.86)
per 1,000
extended
load
testing
of
standard
1776-C53
900
K hours
90
K in9 ratings).
K 0.020900
N/A
750
0.1
0.1detail25
15 interference
0.02Design
0.01
0.02.900
2
Range
48,000
volts
("-15"
-100M
- 1%
.315 �.76)
�.030
Non-Inductive
which
uses
ahigher
serpentine
�.05)
(0.51
Type
2 �.002
.050
400
Meg 1,250
10.0
25,000
1,000 .150
1 K 5life
Meg
6,250
M
MG810
Recommended
circuit
board
hole0.3
is
.040 �.05)
3.125
�.060
�.002
�.040
.800
(20.32)
(1.27)
Load.500
Life:
hours
at0.5%
+125°C
atvalues
rated
�1.02)
(3.81
(8.00
Standard
max.theresistive
1.000
(25.40)1,000
0.010
�.002
(1.02
�3.05)
Type(0.51
2 �.05)
192 Meg 750 Meg
7.5
15,000
1,000(3.81 0.010
600 ��.002
3,750 M (127.00
Maximum
operating
voltages
60%
than
MG780 (1.27)
20
�.76)
(8.00
in the
board
hole
toNumber:
achieve
�1.52)
�.05)
(1.02provides
.900
(22.86)
resistance
range
values.
1776-C542
900 K.500
90
KCOMPONENTS
9K
1 of
K 150%
N/A �1.02)
5 standard
750
0.25
0.25 circuit
25(79.38
25
0.4
0.02 0.01 for
0.02 (12.70)
Range
2
�.05)
(0.25
1.100 (27.94)
RHOPOINT
LTD.
(12.70)
Overvoltage
capabilities
of
working
Model
Tolerance
pattern
that
lines
to
carry
current
Tel:
+44
(0)1883
717988in
nominally
0.039
inch
(.99
mm).
.700neighboring
(17.78)
voltage,
not
to
exceed
rated
power.
(0.25 �.05)
0
.040
�.002
6.000
�.120
.350
�.040
listed
in
the
table
may
be
speciﬁed
by
adding
"-15"
to
the
.600
(15.24)
St'd
with
"-15"
rating
0.8%
max.
.315
�.030
15.0
30,000
1,000
1
K
2,000
Meg
10,000
M
384
Meg
MG815
Type
2
a
vertical
mount
of
the
device.
.040
�.002
4.000
�.120
Holland
Road
25
75
125
175
225
275
.800
(20.32)
RATIO
DEFINITION:
Fax: +44 (0)1883
712938
RATIO
DEFINITION:
Where
R2T =and
1+ R
2 N/A
+ R800
3 + has
R�
R750
5 been
�.05)
(1.02
(152.40 �3.05)
1776-C54
900
K.700
90
9
K
1RK1,000
54 +
0.1
0.1 through
15
0.3
0.02 0.01
0.02
2
Range
�1.02)
(8.89
voltages
for
allK models
values,
(except
"-15"
This
exceptional
performance
proven
8.0
20,000
Meg ratings).
5,000
M 25
320
Meg 1,000
MG785
Type
opposite
directions,
thereby
achieving
maximum
cancellation
Resistor
Value:
(17.78)
0.020 �.002
�.76)
(8.00
�.05)(Example:
(1.02
(101.60 �3.05)model
.150
�.040
number
MG750-15).
that
AMBIENT
°C
Hurst
Green
0.020
R1�.05) Note
Resistance
Range
Load
Life,
�Roverload
RATIO
1.900 (22.86)
R
1:R2
e-mail:
[email protected]
RATIO
1 (R
2 + (20.32)
R3 + R4 + R5):R
T �.002 TEMPERATURE,
(0.51
Recommended
circuitof
board
hole
is
.150
�.040
.800
Extended
Range
0.8%
max.
�1.02)
(3.81
R
5demands
R
3 that
R
4
R
1
R
2
1.000
(25.40)
�.05)
(0.51
many
years
of
use
in
equipment
the
highest
ﬂux
ﬁelds
over
the
of the
the "-15"
resistor.
This
1776-C541
900 K .900
K
9K
1K
N/A �1.02)
5
750
0.1
0.05
25 5.000 �.120
15
0.3.040 �.002
0.02
0.01
0.02
2
Range
.315
�.030
(3.81
Oxted,
Resistance
Tolerances
±1.0%
RATIO
2entire
1web:
:R3 length
(22.86)
3Surrey,
+90
R
4 + R5RH8
):R
T 9AX
www.rhopointcomponents.com
1.100R
(27.94)
and
overvoltage
ratings
do
not
apply
to
Type
2 from
400±0.1%.
Meg
10.02 (R25,000
1,000
1 K to
1,250 Meg
6,250 M 0.039
MG810RATIO
R2 0.5%
R5 resistors.
R3 Rmax.
4
Models
with
low inductance
construction
are
in shaded
areas.
nominally
mm).
�.76) non-inductive
(8.00
Standard
(1.02 �.05)
�3.05)(.99
(127.00inch
reliability
including
TWT
amplifiers,
X-ray
RATIOconstruction
3
R1:R
4
RATIO 3 and
(R4 + R5stability,
):RT
efﬁcient
isshown
accomplished
without
Solderable
Leads
RATIO
DEFINITION:
Temperature
Coefﬁcient,
range,
of
RATIO DEFINITION:
Where RT = Rfor
1 + Rstandard
2 + R3 + R4 + Rresistance
5
DIMENSIONS
IN
INCHES
AND
(MILLIMETERS)
Resistance
ranges
for
"-15"
resistors
in
the
table
are
3
7
1
2
4
5
6
RATIO
4
R1:R
5
Models
Resistance
Pattern
are
in non-shaded
areas.
RATIO
4 (Rwith
5):RT Caddock's Non-Inductive
�.002performance
6.000 �.120
.350 �.040 of.040
6
5 medical
2
3
systems,
geophysical
and
electronics.
R1
RHOPOINT
St'd with
rating
0.8%
max.
derating
any
IL-110.019
:R
2 High Temperature
RATIO
1 "-15"
R1advantages.
RATIO
1 Engineering
(R30,000
2 + R3 + R4 Type
+ Rinstruments,
5LTD.
):R
15.0COMPONENTS
1 4K
2,000 Meg
10,000
384 Meg
MG815
2 T 1 1,000
+44
(0)1883
717988
Encapsulation:
Silicone
Conformal.
Applications
SalesTel:
and
Cor
porate
Ofﬁ
ce
80 ppm/°C
in combination
tolerances
asM (152.40 �3.05)from
R1with
R2 resistance
R3 R4 R5
�.05)to "Standard
(8.89 �1.02)
"-15 (1.02
Min."
Max."
HollandRATIO
Road
RATIO 2
R1:R3
2 (R3 + R4 + R5):RT
Fax:
+44
(0)1883
712938
R21717
R3 Chicago
Rmax.
4
R5
17271
North
Umpqua Hwy.
Avenue
Extended
Range
0.8%
tight
as
±0.1%.
RATIO
3
R
1:R4
Hurst
Green
RATIO
3
(R
4 + R5):RT
e-mail:
[email protected]
Non-Inductive
Performance
Applications
Engineering
Sales
and
Corporate
Ofﬁce
IN INCHES AND (MILLIMETERS)
Applications
Sales
Roseburg,
Oregon
97470-9422
Riverside,
Models
with
low inductance construction
are
in
shaded DIMENSIONS
areas.
Resistance
inches and (millimeters)
1
2 and
4Cor5porate
6 92507-2364
3 California
7Ofﬁce
Max.
RATIO 4
R1:R
5
RATIO
4 Engineering
(R
5):R
T 9AX have 1
Oxted,
Surrey,
RH8
2
3
4
5
6
web:
www.rhopointcomponents.com
Type
MG
resistors
stability
of 0.01% Dimensions• inweb:
Solderable
Leads
Overload demonstrated
Model
WattDielect.
17271
North
Umpqua
Hwy.
1717
Chicago
Most
models
are manufactured
with
Caddock's
e-mail:
[email protected]
www.caddock.com
17271
North
Umpqua
Hwy.
1717
Chicago
Av
eAvenue
nue
Continuous
Phone:
Phone:
(951)
788-1700
Standard
Extended
-15
Rating Non-Inductive
No. (541)
age 496-0700
Strength
A
B
C
Models
with
Caddock's
Resistance
Pattern
are
in
non-shaded
areas.
Min.
Oper.
Volt.in extended load
Resistance
Tolerance:
per
1,000
hours
testing
of standard
Roseburg,
Oregon
97470-9422
Riverside,
California
92507-2364
Max.
Max. by country Non-Inductive
Roseburg,
Oregon
97470-9422
Riverside,
92507-2364
Min. Distributors
Forlife
Caddock
listed
see caddock.com/contact/dist.html
Encapsulation:
High
Temperature
Silicone
Conformal.
Fax:
(541)
496-0408
Design
which uses
a California
serpentine
resistive
Fax:
(951)
369-1151
IL-110.019
e-mail:[email protected]
[email protected]
• web:
www.caddock.com
Phone:
(541)
Phone:
788-1700
e-mail:
• web:
www.caddock.com
�.015 .025 �.002
.094
Phone:
(541) 496-0700
496-0700
Phone:
(951)
788-1700
resistance
range
.313 �.020
Applications
Engineering
and
Cor
po(951)
rate
Ofﬁ
ce in
Resistance
Range Sales
Tolerance
pattern
that
provides
for
neighboring
lines
to
carry
current
600 values.
200 �
5 Meg
N/A
750
N/A
MG650 0.5
Type 1
�.38)
(2.39
(7.95 �.51)
(.64 �.05)
ForCaddock
CaddockDistributors
Distributors
listed
country
caddock.com/contact/dist.html
©Fax:
2004(541)
Caddock
Electronics,
Inc.
496-0408
28_IL118.1004
For
listed
byby
country
seesee
caddock.com/contact/dist.html
Fax:
(951)
369-1151
Fax:
(541)
496-0408
Fax:
(951)
369-1151
Applications
Engineering
Sales
and
Corporate
Ofﬁce
17271
North
Umpqua
Hwy.
1717
Chicago
Av
e
nue
This
exceptional
performance
has
been
proven
through
opposite
directions,
thereby
achieving
maximum
cancellation
Standard
�1%,
�0.5%,
�0.25%,
�0.1%
.313 �.030 .109 �.025 .025 �.002
17271
Umpqua
Hwy.
Roseburg,
97470-9422
1717 Chicago
Avenue
Riverside, California
92507-2364
Type 1
0.5Oregon
600
750
200that
�
8 Meg
N/A
N/A
MG655North
(2.77
�.64)
many
years
of
use
in
equipment
demands
the
highest
(7.95
(.64
�.76)
�.05)
©
2004
Caddock
Electronics,
Inc.
©
2004
Caddock
Electronics,
28_IL118.1004
28_IL110.1004
of
ﬂux
ﬁelds
over
the
entire
length
of
the
resistor.
HurstRiverside,
GreenPhone:
• Surrey
• RH8
9AX This
• UK
e-mail: [email protected] • web: www.caddock.com
Phone: (541)
496-0700
(951)
Roseburg,
Oregon
97470-9422
California
92507-2364
St'd with "-15" rating
�1%788-1700
�.015non-inductive
.094www.caddock.com
.025 �.002
.500 �.030
reliability
and
amplifiers,
Distributors
by country
see
caddock.com/contact/dist.html
efﬁcient
construction
is
accomplished
without
Fax:
(541)
Fax:
(951)
369-1151
• web:
Phone:
(541)
496-0700
Email
•
[email protected]
Phone:
(951)
788-1700
Type 1 including
0.6496-0408
1,000stability,
750 For
400 Caddock
�TWT
[email protected]
Meg listed
N/AX-ray
N/Ae-mail:
MG660
(12.70 �.76) (2.39 �.38)
(.64 �.05)
Extendedadvantages.
Range
Caddock
Distributors
listed by country
see caddock.com/contact/dist.html
Fax:
(541) 496-0408
Fax:�1%
(951) 369-1151
systems,
geophysical instruments,For
and
medical
electronics.
derating
of 608
any1188
performance
Web • www.rhopointcomponents.com
870
.094(0)
�.015
© 2004 Caddock Electronics, Inc.
.750Tel:
�.030+44
.025 �.002
28_IL118.1004
600 �
2,000
750
20 Meg
N/A
N/A
MG680 0.8
Type 1
(19.05 �.76) (2.39 �.38)
(.64 �.05)
Temperature
Coefﬁcient:
© 2004 Caddock Electronics, Inc.
28_IL110.1004
.094 �.015
.025 �.002
1.000 �.040in inches
Dimensions
and (millimeters)
Max.
1.0
4,000
750
800 �
50 Meg
N/A
N/AResistance
Type 1
MG710
Overload
Model WattDielect.
Resistance
(25.40 �1.02) (2.39 �.38)
(.64 �.05)
CADDOCK
Max. ELECTRONICS
.750 �.020
.100
1200
N/A
-15
Rating Strength Min.
No.
age Oper.
.250 �.050
.700 (17.78)
Volt.
Min.
MG
731
(6.35 �1.27)
1776-C481PIN 10
1200
1.1111M
1 Meg.800
(20.32) 101.01K 10.01K 1.0001K 11
Type
1
1,000
750
400
�
N/A
MG660 0.6
.025
�.002
0.5
600(25.40)
200 11
� 1200
N/A
Type 1 10.01K750
MG650 .100
1776-C4815
10 Meg 1.000
1.1111M
101.01K
1.0001K
MODEL 1776-10
0402
Overload
Model WattDielect.
�.51)
(19.05
1776-C48
10 MG
Meg
1.1111M
101.01K
1.0001K
Continuous
Type 1 10.01K750
0.5
600
200 11
�
MG655 (2.54)
740
CADDOCK
0417
1776-C54
Type MG Precision High Voltage Resistors
Now with Extended Resistance Range to 10,000 Megohms and Additional Models
Temperature Coefﬁcient as tight as 80 ppm/°C, Combined with Excellent Long-Term Stability and Precision Tolerances.
Type MG Precision High Voltage Resistors
•
•
Design Assistance in Developing High Voltage Resistor Sets with
Low TC Tracking.
Now with Extended Resistance Range to 10,000 Megohms and Additional Models
Design Assistance in Developing High Voltage Resistor Sets with
•Temperature Coefﬁcient as tight as 80 ppm/°C,
Combined
with Excellent Long-Term Stability and Precision Tolerances.
Low
TC Tracking.
New Smaller
Models at Lower Cost
•
Ordering Information
•
New Smaller Models at Lower Cost
•
•
Ordering Information
•
•
•
•
UK & Ireland
Distributors
RHOPOINT COMPONENTS LTD.
CADDOCK
CADDOC
DOCKK
CAD
CAD
CADDOC
DOCKK
RHOPOINT COMPONENTS LTD. Speciﬁcations:
Speciﬁcations:

Open as PDF

Similar pages: ETC TG1015; Type USVD and Type HVD Ultra-Precision Voltage Dividers; ETC 1776-C481; Type 1776 Precision Decade Resistor Voltage Dividers; ETC MG735; RHOPOINT CD2015FC; RHOPOINT USG1110-150M-0.10; Technical application guide - The LEDset (Gen2) interface (05/14); Advantech ACP-2000 User Manual; RHOPOINT T912-B10K-002-10; RHOPOINT HVD; RoHS Lead Free Information; TYSEMI DMN2005K-7-F; RHOPOINT CC2520FC; ETC IS-CHPMP; TI TLE2425MD; RCD V5A91FD10; Download Specifications; VISHAY VTF209BX; NKK JWMW22RH; ETC JWMW12BA2A-A; ASM-SENSOR 3334