RMT Ltd. Thermoelectric module Datasheet Performance parameters Type DTmax Qmax Imax Umax AC R K W A V Ohm H mm 1MX06-063-xx (N=126) 1MX06-063-05 69 27,30 6,0 0,97 1,6 1MX06-063-08 70 18,20 3,9 1,50 1,9 1MX06-063-10 71 14,90 3,2 1,85 2,1 1MX06-063-12 71 12,60 2,7 2,15 2,3 1MX06-063-15 71 10,10 2,2 2,71 2,6 7,70 Perfomance data are given for Thot=300K vacuum Technical Drawing Ordering Options A. TEC Internal Solder: Lead-free SnSb Solder (Tmelt=230°C) B. TEC Ceramics: 1. Pure Al2O3 (100%) 2. Alumina (Al2O3 96%) 3. Aluminium Nitride (AlN) C. Surface Finish (one or both) 1. Blank Ceramics 2. Metallized: 2.1 Ni-Sn plaiting 2.2 Au plaiting 3. Metallized and Pre-tinned 3.1 Solder 94 (PbSnBi,Tmelt=94°C) 3.2 Solder 117 (InSn,Tmelt=117°C) 3.3 Solder 138 (SnBi,Tmelt=138°C) 3.4 Solder 183 (PbSn,Tmelt=183°C) 3.5 Solder 199 (SnZn, Tmelt=199°C) D. Thermistor (optional) NTC thermistor type TB Resistance nominal 1. 2.2 kOhm@20C 2 10.0 kOhm@20C Individual calibration is avaiable in -65..+85°C Copyright 2007. RMT Ltd. The design and specifications of products can be changed by RMT Ltd. without notice. 2 RMT Ltd. Thermoelectric module Datasheet 1MX06-063-05 Standard Performance Plots Color Legend: Imax, 0.8 Imax, 0.6 Imax, 0.4 Imax 1MX06-063-08 Standard Performance Plots Color Legend: Imax, 0.8 Imax, 0.6 Imax, 0.4 Imax Perfomance plots are created with TECCAD Software. TECCAD is available for download from RMT Ltd. website - www.rmtltd.ru Copyright 2007. RMT Ltd. The design and specifications of products can be changed by RMT Ltd. without notice. 3 RMT Ltd. Thermoelectric module Datasheet 1MX06-063-10 Standard Performance Plots Color Legend: Imax, 0.8 Imax, 0.6 Imax, 0.4 Imax 1MX06-063-12 Standard Performance Plots Color Legend: Imax, 0.8 Imax, 0.6 Imax, 0.4 Imax Perfomance plots are created with TECCAD Software. TECCAD is available for download from RMT Ltd. website - www.rmtltd.ru Copyright 2007. RMT Ltd. The design and specifications of products can be changed by RMT Ltd. without notice. 4 RMT Ltd. Thermoelectric module Datasheet 1MX06-063-15 Standard Performance Plots Color Legend: Imax, 0.8 Imax, 0.6 Imax, 0.4 Imax Applications Tips Cautions 1. Do not heat TE module more than 200oC (TEC assembled 3. Connect TE sub-mount to a DC power supply in at 230oC) or 160oC (optional TECs assembled at 183oC). acccordance to polarity. 2. Do not use TE module without attached heat sink at hot 4. Do not apply DC current higher than Imax. (bottom) side. Installation 1. Mechanical Mounting TEC is placed between two heat exchangers . This construction is fixed by screws or in another mechanical way. It is suitable for large modules (with dimensions 30mmx30mm and larger). 2. Soldering This method is suitable for a TE module with metallized outside surfaces (cold and hot sides). RMT provides this option and also makes pre-tinning for TE modules. 3. Glueing A glue is usually based on some epoxy compound filled with some thermoconductive material such as graphite or diamond powders, silver, SiN and others. The application of a specific type depends on application features and the type of a TE module. Definitions Value DTmax Qmax Imax Umax Rt -xx Thot H Description Maximum temperature difference at I=Imax Maximum heat pumping capacity at I=Imax Maximum current Maximum voltage drop Header thermal resistance Thermoelectric pellet length code TEC hot side temperature Total TEC height Notes rated at Qmax=0, at other Q it should be estimated as DT= DTmax(1-Q/Qmax) rated at DT=0, at other DT it should be estimated as Q=Qmax(1-DT/DTmax) Electric parameters resulting in greatest DTmax Pellet length is "-xx" x 10 (in mm) Performance data shown in specifications are given for Thot=300 K, vacuum All dimensions are given in mm Copyright 2007. RMT Ltd. The design and specifications of products can be changed by RMT Ltd. without notice. 5