CXOX OSCILLATOR 1 MHz to 160 MHz Ultra-Miniature Surface Mount High Frequency Crystal Oscillator ® Actual Size Top View DESCRIPTION Side View Statek’s ultra miniature and ultra low profile CXOX oscillator consists of a CMOS/TTL compatible hybrid circuit and a state-of-the-art, miniature, fundamental-mode crystal. DIMENSIONS FEATURES A C Designed for surface mount applications 4 CMOS and TTL compatible Low power consumption 3 B 1 High shock resistance E 4 3 TOP Full military testing available D BOTTOM 2 2 1 Optional Output Enable/Disable with Tri-State TYPICAL Low EMI emission Hermetically sealed ceramic package DIM inches mm inches mm A 0.126 3.20 0.136 3.40 B 0.099 2.50 0.107 2.70 0.039 C (SM1) C (SM3/SM5) 0.044 1.00 1.12 0.043 0.048 1.09 1.21 Designed and manufactured in the USA APPLICATIONS MAXIMUM D 0.040 1.00 0.041 1.10 E 0.030 0.75 0.031 0.85 Military & Aerospace Long range missiles Projectile electronics PIN CONNECTIONS Smart munitions 1. Output Enable/Disable (E) or no connection (N) Communications 2. Ground Navigation 3. Output GPS 4. VDD Industrial, Computer & Communications SUGGESTED LAND PATTERN Miniature clock oscillator 0.141 (3.6) Handheld instrumentation PDA Transponder/Animal migration 0.110 (2.9) Medical 0.031 (0.8) Test & diagnostic equipment 0.039 (1.05) Handheld devices 0.051 (1.3) 0.039 (1.0) inches (mm) ■ ■ ■ S 10168 Rev A YS 90 Änderungen vorbehalten / subject to change without notice ■ 01 TEM C ERT I F I C AT N IO ■ IS O Distribution: RSG Electronic Components GmbH Sprendlinger Landstr. 115 D-63069 Offenbach/Germany Tel. +49 69 984047-0 Fax +49 69 984047-77 [email protected] www.rsg-electronic.de Pb SPECIFICATIONS ABSOLUTE MAXIMUM RATINGS Specifications below are examples. Specifications are subject to change without notice. Tighter specifications available. Please contact factory. Supply Voltage VDD -0.5 V to 7.0 V Storage Temperature -55OC to 125OC Maximum Process Temperature 260OC for 20 seconds Frequency Range1 Supply Voltage 1 MHz to 160 MHz 1.8 V to 5.0 V +_10% Calibration Tolerance2 + _ Frequency Stability Over Temperature3 + _ 100 ppm for Military Supply Current (Typical) 24 MHz 32 MHz 50 MHz 130 MHz + _ 1.8 V 1.5 mA 2.0 mA 3.0 mA 12.0 mA Output Load (CMOS)4 15 pF Start-up Time 5 ms MAX Rise/Fall Time 6 ns MAX ENABLE/DISABLE OPTIONS (E/N) 100 ppm Statek offers two enable/disable options: E and N. The E-version has a Tri-State output and stops oscillating internally when the output is put into the high Z state. The N-version does not have PIN 1 connected internally and so has no enable/disable capability. The following table describes the Enable/Disable option E. 50 ppm for Commercial + _ 100 ppm for Industrial 5 3.3 V 3.0 mA 5.0 mA 6.0 mA 23.0 mA 5.0 V 8.0 mA 10.0 mA 13.0 mA 39.0 mA ENABLE/DISABLE OPTION E FUNCTION TABLE Enable (Pin 1 High*) Disable (Pin 1 Low) Duty Cycle 40% MIN 60% MAX Aging, first year 10 ppm MAX Shock, survival6 5,000 g, 0.3 ms, 1/2 sine Vibration, survival7 20 g, 10-2,000 Hz swept sine Output Frequency Output High Z State Oscillator Oscillates Stops Current Normal Very Low * When PIN 1 is allowed to float, it is held high by an internal pull-up resistor. Operating Temp. Range -10OC to 70OC (Commerical) -40OC to 85OC (Industrial) -55OC to 125OC (Military) PACKAGING OPTIONS 1. 2. 3. 4. 5. 6. 7. Not all frequencies available at all voltages. Contact factory. Other tolerances available. Does not include calibration tolerances. Other tolerances available. Higher CMOS loads and TTL loads available. Contact factory. 45/55 available upon request in most cases. Higher shock levels available. Contact factory. Per MIL-STD-202G, Method 204D, Condition D. Random vibration testing also available. Note: All parameters are measured at ambient temperature with a 10 MΩ, 15 pF load. CXOX - Tray Pack - 12 mm tape, 7” or 13” reels Per EIA 481 (see Tape and Reel data sheet 10109) HOW TO ORDER CXOX SURFACE MOUNT CRYSTAL OSCILLATORS 4 S N SM3 Supply Voltage 1 = 1.8 V 2 = 2.5 V 3 = 3.0 V 4 = 3.3 V 5 = 5.0 V “S” if special or custom design. Blank if Std. Enable/Disable Option E or N Terminations Blank = SM1 = Gold Plated (Lead Free) SM3 = Solder Dipped SM5 = Solder Dipped (Lead Free) 40.0M , Frequency K = kHz M = MHz 100 / 100 / Frequency Stability over Temp.Range (in ppm) Calibration Tolerance @ 250C (in ppm) I / Temp. Range: C = -10OC to +70OC I = -40OC to +85OC M = -55OC to +125OC S = Customer Specified OR / / 200 Total Frequency Tolerance (in ppm) / I Temp. Range: C = -10OC to +70OC I = -40OC to +85OC M = -55OC to +125OC S = Customer Specified ■ ■ 90 Änderungen vorbehalten / subject to change without notice ■ YS IS O ■ 10168 Rev A ■ 01 TEM C ERT I F I C AT N IO Distribution: RSG Electronic Components GmbH Sprendlinger Landstr. 115 D-63069 Offenbach/Germany Tel.CORPORATION +49 69 984047-0512 Fax 69 ST., 984047-77 [email protected] www.rsg-electronic.de STATEK N.+49 MAIN ORANGE, CA 92868 714-639-7810 FAX: 714-997-1256 www.statek.com S CXOX Pb