MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS NW5 NW5 SERIES Bi-polar, 5mm Height ◆FEATURES • RoHS compliance. ◆SPECIFICATIONS Items Characteristics Category Temperature Range −40∼＋85℃ Rated Voltage Range 6.3∼50V.DC Capacitance Tolerance ±20％（20℃，120Hz） I＝0.05CV or 10μA whichever is greater. (After 5 minutes application of rated voltage) Leakage Current(MAX) I＝Leakage Current(μA) C＝Rated Capacitance(μF) V＝Rated Voltage(V) （20℃，120Hz） Rated Voltage 6.3 10 16 25 35 50 (V) tanδ 0.26 0.22 0.20 0.20 0.20 0.20 Dissipation Factor(MAX) (tanδ) After applying rated voltage with rated ripple current for 1000hrs at 85℃, (The polarity shall be reversed every 500hrs.), the capacitors shall meet the following requirements. Endurance Capacitance Change Within ±25％ of the initial value. Dissipation Factor Not more than 200％ of the specified value. Leakage Current Not more than the specified value. Rated Voltage 6.3 (V) Z（−25℃）/Z （20℃） 6 Z（−40℃）/Z （20℃） 12 Low Temperature Stability Impedance Ratio(MAX) 10 16 25 35 50 4 4 3 2 2 10 8 6 4 4 （120Hz） ◆MULTIPLIER FOR RIPPLE CURRENT Frequency coefficient Frequency （Hz） 0.1∼1μF Coefficient 60 （50） 120 500 1k 10k≦ 0.50 1.00 1.20 1.30 1.50 2.2∼4.7μF 0.65 1.00 1.20 1.30 1.50 10∼47μF 0.80 1.00 1.20 1.30 1.50 ◆PART NUMBER □□□ NW5 □□□□□ □ □□□ □□ D×L Rated Voltage Series Rated Capacitance Capacitance Tolerance Option Lead Forming Case Size NW5 MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS ◆DIMENSIONS (mm) SLEEVE ±0.5 φd F φD 4 φd 15MIN 4MIN 6.3 0.45 F L＋1.5MAX 5 1.5 2.0 2.5 φD＋0.5MAX ◆STANDARD SIZE, RATED RIPPLE CURRENT Size φD×L(mm), Ripple Current (mA r.m.s./85℃, 120Hz) WV （V.DC） Cap（μF） 6.3 (0J) 10 (1A) 4×5 1 0.22 4×5 2 0.33 4×5 2 0.47 4×5 3 1 4×5 5 5×5 10 Size Ripple 50 (1H) 0.1 Size Ripple 35 (1V) Ripple Size Ripple 25 (1E) Size Size Ripple 16 (1C) 2.2 3.3 4.7 Size Ripple 4×5 9 5×5 10 5×5 11 4×5 12 5×5 13 5×5 14 6.3×5 21 6.3×5 24 10 4×5 14 5×5 18 5×5 20 22 5×5 25 6.3×5 30 6.3×5 32 33 6.3×5 35 6.3×5 37 47 6.3×5 40