TITLE LM259X Inductor 47 µHy 2.25 ADC SCHOTT CORPORATION PART NUMBER AGENCY APPROVAL: N/A 1000 PARKERS LAKE ROAD WAYZATA, MN 55391 REV B 34603 PAGE 1 Old Schott P/N: 67144530 ELECTRICAL CHARACTERISTICS Specifications at room temperature (ref. 25°C) .560 MAX (14.22) 1. INDUCTANCE: @ 10 kHz, 0.1 Vrms, (1 thru 5 to 6 thru 10 ) = 47 - 60 µH 2. DC RESISTANCE: (1 thru 5 to 6 thru 10 ) = .035 Ohms Max. 6 REF PWB LAYOUT SCHOTT 14453 YYWW .560 MAX (14.22) .063 (1.60) 10 3. SRF: 2.0 MHZ Min. 5 .035 (0.89) .100 (2.54) 1 .710 18.03) 4. HIPOT: 500 VDC WINDING TO CORE 2 SEC., 5 mA MAX .012 (0.3) .008 (0.2) .500 MAX (12.7) GENERAL NOTES: 1. Current rating is the current at which the inductance is a minimum of 90% of the rated value. 2. All pins may not be used; electrical schematic is based on the standard footprint. .100 ±.010 (2.54) .606 (15.39) .028 (0.7) NOTE: COPLANARITY OF ±.004 ACROSS ALL LEADS .670 ±.010 (17.02) Jumper terminals on PC Board. 1,2,3,4,5 Jumper terminals on PC Board. 6,7,8,9,10 TOLERANCES UNLESSOTHERWISENOTED 2 PLACE + .03 - 3 PLACE + - .010 ANGLE + - °