TITLE TRANSFORMER, ADSL CUSTOMER OFFICE AGENCY APPROVAL: N/A 1000 PARKERS LAKE ROAD WAYZATA. MN 55391 (952) 475-1173 TEMP CLASS 105°C DESIGNED TO MEET UL1950/IEC-950 REQUIREMENTS WORKING VOLTAGE 250 VRMS, SUPPLEMENTARY INSULATION 1 END SCHOTT 34915 YYWW .560 MAX (14.22) 1 5. DC RESISTANCE: OHMS 1-4-2-5 = 0.80 MAX 10-7-9-6 = 1.10 MAX 2 6 10 2. LEAKAGE INDUCTANCE: @ 0.1 Vrms, 100 kHz 1-5 tie 2&4 (short 10&7, 9&6 ) = 10 µH MAX 4. TURNS RATIO: 1-5 : 10-6 TIE 7&9, 4&2, = 1 : 1.41 +/- 1% 34915 PAGE .560 MAX (14.22) 5 3. IWC: 1-5 TO 10-6 @ 100 kHz, 0.1Vrms = 30 pF MAX REV NOTE: PIN #3 REMOVED SPECIFICATIONS 1. INDUCTANCE: @ 0.1 Vrms, 10 kHz, 1-5 (TIE 2&4) = 213 TO 260 µH 10-6 (TIE 7&9) = 426 TO 521 µH PART NUMBER .500 MAX (12.70) .110 MIN (2.79) 6. LONGITUDINAL BALANCE: V1 = 0 dBm @ 20 kHz TO 250 KHz, Rs = 100 OHMS INPUT, Rl = 50 OHM LOAD, LINE = 10-6, GROUND PIN #5, CHIP = 1-5, V2 = 60 dB MIN .100 ±.010 (2.54) .400 ±.010 (10.16) .020 Sq. (0.51) 7. DIELECTRIC STRENGTH: 1500 Vac, 1 SECOND 1&2 TO 10&9 ALL WINDINGS TO CORE 8. HARMONIC DISTORTION: @ 100 kHz, 10-6 = 100 OHM INPUT, 1-5 = 50 OHM LOAD, V1 = 15V p-p, V2 = -85 dB MAX (5.32 VRMS) LINE 9. INSERTION LOSS: = 0.5 dB MAX @100 KHz TO 1.0 MHz LINE = 10-6, CHIP = 1-5 Rs = 100 OHMS, Rl = 50 OHMS © 2000 SCHOTT CORPORATION, 1000 PARKERS LAKE ROAD, WAYZATA MN, 55391 (952) 475-1173 inches (mm) 10 1 7 9 4 2 6 5 TOLERANCES UNLESS OTHERWISE NOTED 2 PLACE ± .010 CHIP ANGLE 3 PLACE ± .005 ± °