TITLE OCTAL T1/E1 TRANSFORMER 37540 PN AGENCY APPROVAL: NA F REV 2 SH OF 12 DIMENSIONAL OUTLINE 1.130 1.115 SPECIFICATIONS EXTENDED TEMP RANGE (-40C TO +85C) 1. TURNS RATIO: TRANSMIT (IN+ TO IN-) : (OUT+ TO OUT-) RECEIVE (IN+ TO IN-) : (OUT+ TO OUT-) 2. INDUCTANCE: TRANSMIT (IN+ TO IN-) RECEIVE (IN+ TO IN-) TRANSMIT (IN+ TO IN-) RECEIVE (IN+ TO IN-) 3. LEAKAGE INDUCTANCE: TRANSMIT IN+ TO IN(WITH OUT+ AND OUT- SHORT) RECEIVE IN+ TO IN(WITH OUT+ AND OUT- SHORT) 4. INTERWINDING CAPACITIANCE: (IN+, IN-) TO (OUT+, OUT-) 1 : 1.36CT ±2% 1 : 2CT ±2% SCHOTT . .495 .480 37540 PIN 1 INDICATOR 1.2 mH MIN. @ 0.01V. 100KHz . 25C 1.2 mH MIN. @ 0.01V. 100KHz . 25C 600 uH MIN. @ 0.01V. 100KHz . -40C TO +85C 600 uH MIN. @ 0.01V. 100KHz . -40C TO +85C .640±.010 DATE CODE & COUNTRY OF ORIGIN .018±.002 .950±.010 .010±.002 .220±.010 0.5uH MAX. @ 1MHz .015±.005 REF. PWB LAYOUT .050 0.5uH MAX. @ 1MHz .090 .660 35pf MAX @ 1MHz .090 5. D.C. RESISTANCE: TRANSMIT (IN+ TO IN-),(RECIEVE(IN+ TO IN-) RECEIVE (OUT + TO OUT-) TRANSMIT (OUT + TO OUT-) .030 0.6ohms Max. 1.2 ohms Max. 0.9 ohms Max COPLANARITY OF PINS IS LESS THEN OR EQUAL TO 0.004 INCHES SCHEMATIC 1.36CT : 1 6. DIELECTRICAL VOLTAGE WITHSTAND: (IN+, IN-) TO (OUT+, OUT-) OUT + 1 1500VAC for 60 seconds (1800 VAC for 1 second production test) 7. RETURN LOSS: (WINDING WITH TURNS RATIO 2&1.36 IS 100 OHM REF.) (25 OHMS CONNECTED TO THE LOW TURNS SIDE OF 2 RATIO TRANSFORMER) (54 OHMS CONNECTED TO THE LOW TURNS SIDE OF 1.36 RATIO TRANSFORMER) 12dB MIN 51KHz TO 102KHz 18dB MIN 102KHz TO 2.048MHz 14dB MIN 2.048MHz TO 3.072 MHz 40 IN + TX 2 TX 12 OUT - 3 OUT - 13 39 IN - 1 : 2 CT IN + 4 RX IN - 5 65dB OR BETTER 9. COMMON MODE REJECTION: 50dB OR BETTER @ 1MHz TX IN + 37 RX 36 OUT - IN - 35 IN + 9 34 IN - 1 : 2 CT RX IN - 10 TOLERANCES UNLESS OTHERWISE SPECIFIED 14 IN + 32 RX 31 OUT - IN - INCHES / DECIMAL MILLIMETERS (mm) IN + 29 IN - 28 OUT + 27 15 26 OUT - 25 IN + 24 IN - 23 OUT + 1.36CT : 1 17 OUT - 18 33 OUT + 30 1 : 2 CT OUT + 16 TX 7 OUT - 8 IN + 1000 Parkers Lake Road, Wayzata, MN 55391, (952) 475-1173, www.schottcorp.com 38 OUT + 1.36CT : 1 OUT + 6 8. CROSS TALK: 1.36CT : 1 OUT + 11 1 : 2 CT 19 22 20 .XX = ± .01 .XX = ± 0.20 21 .XXX = ±.005 OUT - ANGLES ± 1°