FEF (Snap) Fuseholders www.schurter.com/pg02 Shock-Safe Fuseholder, 5 x 20 mm, Slot/Fingergrip, Snap Stepless, 0.75 - 3.0 mm Fingergrip Variant 2 250 VAC · 4 W / 10 A (VDE)10 A (UL/CSA) Description References Standards Weblinks -Panel Thickness 0.75 - 3.0 mm, Snap stepless General Product Information -IEC 60127-6 -UL 512 -CSA C22.2 no. 39 Approvals, RoHS, CHINA-RoHS, e-Store, Distributor-Stock-Check, Accessories, Product Change Notification (PCN) Approvals -VDE License Number: 131952 UG -UL File Number: E39328 Technical Data Shocksafe Category Fuse-Link Mounting Mounting Terminal Rated Voltage Rated Current Rated Power Acceptance IEC Degree of Protection Admissible Ambient Air Temp. Climatic Category Material: Socket Material: Cap Material: Terminals Unit Weight (Socket/Cap) Storage Conditions Product Marking PC2 5 x 20 mm Panel Mount, Front-Side Snap-in Solder or Quick-Connect 2.8 x 0.5 mm 250 VAC 10 A (VDE), 10 A (UL/CSA) 4 W / 10 A @ Ta 23 °C IP 40 -40 °C to 85 °C 40/085/21 acc. to IEC 60068-1 Thermoset, black, UL 94V-0 Thermoplastic, black, UL 94V-0 Tin-Plated Copper Alloy 6.35 g 0 °C to 60 °C, max. 70% r.h. , Type, Voltage, Current, Approvals Abmessungen Soldering Methods Solderability Resistance to Soldering Heat Contact Resistance Dielectric Strength Impulse Withstand Voltage Insulation Resistance Overvoltage Category Pollution Degree Panel Thickness s Iron 350 °C / 2 sec acc. to IEC 60068-2-20, Test Ta, method 2 350 °C / 10 sec acc. to IEC 60068-2-20, Test Tb, method 2 < 5 mΩ at 20 mV > 3 kV between L-N > 4 kV between L/N-PE (50 Hz; 1 min) > 4 kV between L-N > 6 kV between L/N-PE > 10 MΩ between L-N > 100 MΩ between L/N-PE (500 VDC; 1 min) I - III acc. to IEC 60664-1 1 - 3 acc. to IEC 60664-1 0.75 - 3.0 mm 33 mm S ø 15 1.8 ø 15 S 4 4 0.5 6 0.5 33 33 38 Variant 0031.1091 und 0031.1095 Variant Fingergrip 0031.1901 and 0031.1902 Fuses FEF (Snap) Fuseholders www.schurter.com/pg02 S ø 15 1.8 2. 8 4 38 38 0. 5x 2. 5x 6 8 4 0. ø 15 S 42.5 2.4 0 0 0 13 -0.3 0 13 -0.3 Variant Fingergrip 0031.1913 and 0031.1914 12.7 -0.1 Variant 0031.1161 und 0031.1165 12 -0.1 13.6 Mounting Holes 0031.1161, 0031.1165, 0031.1913 and 0031.1914 Mounting Holes 0031.1091, 0031.1095, 0031.1901 and 0031.1902 Derating Curves for Fuseholders Admissible Power Acceptance in Watt 4.0 3.5 3.0 I = 1.0 In 2.5 2.0 I = 0.7 In 1.5 I = << In 1.0 0.5 0.0 0 20 40 60 80 100 Ambient Air Temperature Ta °C Variants Holder Cap Panel Thickness s [mm] Terminal Degree of Protection Order Number l Slot Knob 0.75 - 1.5mm Solder IP 40 0031.1091 l Slot Knob 1.8 - 3.0mm Solder IP 40 0031.1095 l Fingergrip 0.75 - 1.5mm Solder IP 40 0031.1901 l Fingergrip 1.8 - 3.0mm Solder IP 40 0031.1902 l Slot Knob 0.75 - 1.5mm Solder IP 40 0031.1161 l Slot Knob 1.8 - 3.0mm Solder IP 40 0031.1165 l Fingergrip 0.75 - 1.5mm Solder IP 40 0031.1913 l Fingergrip 1.8 - 3.0mm Solder IP 40 0031.1914 Quick-Connect Terminals on Request Packaging Unit Bulk (100 pcs.) The specifications, descriptions and illustrations indicated in this document are based on Fuses current information. All content is subject to modifications and amendments.