0724 Connectors (Inlets/Outlets) www.schurter.com/pg07 IEC Appliance Inlet C6, Screw-on Mounting, Front Side, Solder Terminal C6 70° C Description References -Panel Mount: Screw-on mounting from front or rear-side -Appliance Inlet, Pin temperature 70 °C, Protection class I -Solder terminals for wires or PCB General Product Information Weblinks Approvals, RoHS, CHINA-RoHS, Mating Connectors, e-Store, Distributor-Stock-Check, Accessories Approvals -VDE License Number: 40017309 -UL License Number: E96454 -CSA License Number: 73165 Technical Data Ratings IEC Ratings UL/CSA Dielectric Strength Allowable Operation Temp. Degree of Protection Protection Class Terminal Panel Thickness s Material: Housing 2.5 A / 250 VAC; 50 Hz 2.5 A / 250 VAC; 60 Hz > 2 kVAC between L-N > 2 kVAC between L/N-PE (1 min/50 Hz) -25 °C to 70 °C from front side IP 40 acc. to IEC 60529 Suitable for appliances with protection class 1 acc. to IEC 61140 Solder terminals for wires or PCB Screw: max 4 mm Mounting screw torque max 0.5 Nm Thermoplastic, black, UL 94V-0 Appliance Inlet C6 acc. to IEC/EN 60320-1, UL 498, CSA C22.2 no. 42 (for cold conditions) pin-temperature 70 °C, 2.5 A, Protection Class 1 Dimensions Solder terminals for PCB 17.5 22.9 39 30 0.8 17 12 9.1 14 ø 2.8 11.1 1 2 17.9 R2 TYP 4 13.1 4.5 22.5 20.6 ø2 TYP 3 R3 TYP 4 3 TYP 2 15.4 Connectors 0724 Connectors (Inlets/Outlets) www.schurter.com/pg07 Solder terminals for wires 17.5 17 12 11.1 14 9.1 2 1 22.5 ø 2.8 20.6 12.18 15.4 Drilling diagrams PCB Layout 2 TYP 3 6.85 6.85 Variants Type Panel mounting Panel Thickness s [mm] 0724 Screw 4 PCB 4300.0101 0724 Screw 4 Solder terminals 4300.0100 Packaging unit Terminal Order Number 100 Pcs Mating Outlets/Connectors Category / Description Power Cord Overview complete Power Cord with IEC Connector C5, Angled 2512 Power Cord with IEC Connector C5, Straight 2530 Power Cord further types to 0724 The specifications, descriptions and illustrations indicated in this document are based on Connectors current information. All content is subject to modifications and amendments.