FAIRCHILD NC7WP02

Revised March 2004
NC7WP02
TinyLogic ULP Dual 2-Input NOR Gate
General Description
Features
The NC7WP02 is a dual 2-Input NOR Gate from
Fairchild’s Ultra Low Power (ULP) series of TinyLogic.
Ideal for applications where battery life is critical, this product is designed for ultra low power consumption within the
VCC operating range of 0.9V to 3.6V VCC.
■ Space saving US8 package
The internal circuit is composed of a minimum of inverter
stages, including the output buffer, to enable ultra low static
and dynamic power.
The NC7WP02 is designed for optimized power and
speed, and is fabricated with an advanced CMOS technology to achieve high speed operation while maintaining
extremely low CMOS power dissipation.
■ Ultra small MicroPak Pb-free package
■ 0.9V to 3.6V VCC supply operation
■ 3.6V overvoltage tolerant I/O’s at VCC from 0.9V to 3.6V
■ tPD
3 ns typ for 3.0V to 3.6V VCC
4 ns typ for 2.3V to 2.7V VCC
5 ns typ for 1.65V to 1.95V VCC
6 ns typ for 1.40V to 1.60V VCC
9 ns typ for 1.10V to 1.30V VCC
24 ns typ for 0.90V VCC
■ Power-Off high impedance inputs and outputs
■ Static Drive (IOH/IOL)
±2.6 mA @ 3.00V VCC
±2.1 mA @ 2.30V VCC
±1.5 mA @ 1.65V VCC
±1.0 mA @ 1.40V VCC
±0.5 mA @ 1.10V VCC
±20 µA @ 0.9V VCC
■ Low noise switching using design techniques of
Quiet Series noise/EMI reduction circuitry
■ Ultra low dynamic power
Ordering Code:
Product
Order Number
Package
Code
Number
Top Mark
NC7WP02K8X
MAB08A
WP02
NC7WP02L8X
MAC08A
Y4
Package Description
Supplied As
8-Lead US8, JEDEC MO-187, Variation CA 3.1mm Wide 3k Units on Tape and Reel
8-Lead MicroPak, 1.6 mm Wide
5k Units on Tape and Reel
Battery Life vs. VCC Supply Voltage
TinyLogic ULP and ULP-A with up to 50% less power consumption can
extend your battery life significantly.
Battery Life = (Vbattery *Ibattery*.9)/(Pdevice)/24hrs/day
Where, Pdevice = (ICC * VCC) + (CPD + C L) * VCC2 * f
Assumes ideal 3.6V Lithium Ion battery with current rating of 900mAH and
derated 90% and device frequency at 10MHz, with CL = 15 pF load
TinyLogic is a registered trademark, and Quiet Series and MicroPak are trademarks of Fairchild Semiconductor Corporation.
© 2004 Fairchild Semiconductor Corporation
DS500811
www.fairchildsemi.com
NC7WP02 TinyLogic ULP Dual 2-Input NOR Gate
October 2003
NC7WP02
Logic Symbol
Connection Diagrams
IEEE/IEC
Pin Assignments for US8
Pin Descriptions
(Top View)
Pin Names
Description
An , Bn
Input
Yn
Output
Pin One Orientation Diagram
Function Table
Y=A+B
Inputs
Output
A
B
Y
L
L
H
L
H
L
H
L
L
H
H
L
AAA represents Product Code Top Mark - see ordering code
Note: Orientation of Top Mark determines Pin One location. Read the top
product code mark left to right, Pin One is the lower left pin (see diagram).
Pad Assignments for MicroPak
H = HIGH Logic Level
L = LOW Logic Level
(Top Through View)
www.fairchildsemi.com
2
Supply Voltage (VCC)
−0.5V to +4.6V
DC Input Voltage (VIN)
−0.5V to +4.6V
Recommended Operating
Conditions (Note 3)
Supply Voltage
DC Output Voltage (VOUT)
0.9V to 3.6V
Input Voltage (VIN)
−0.5V to VCC +0.5V
HIGH or LOW State (Note 2)
VCC = 0V
−0.5V to 4.6V
DC Input Diode Current (IIK) VIN < 0V
0V to 3.6V
Output Voltage (VOUT)
±50 mA
DC Output Diode Current (IOK)
HIGH or LOW State
0V to VCC
VCC = 0V
0V to 3.6V
Output Current in IOH/IOL
VOUT > 0V
−50 mA
VCC = 3.0V to 3.6V
±2.6 mA
VOUT < VCC
+50 mA
VCC = 2.3V to 2.7V
±2.1 mA
± 50 mA
VCC = 1.65V to 1.95V
±1.5 mA
VCC = 1.40V to 1.60V
±1.0 mA
VCC = 1.10V to 1.30V
±0.5 mA
DC Output Source/Sink Current (IOH/IOL)
DC VCC or Ground Current per
± 50 mA
Supply Pin (ICC or Ground)
−65°C to +150 °C
Storage Temperature Range (TSTG)
VCC = 0.9V
±20 µA
Free Air Operating Temperature (TA)
−40°C to +85°C
Minimum Input Edge Rate (∆t/∆V)
VIN = 0.8V to 2.0V, VCC = 3.0V
10 ns/V
Note 1: Absolute Maximum Ratings: are those values beyond which the
safety of the device cannot be guaranteed. The device should not be operated at these limits. The parametric values defined in the Electrical Characteristics tables are not guaranteed at the absolute maximum ratings. The
“Recommended Operating Conditions” table will define the conditions for
actual device operation.
Note 2: IO Absolute Maximum Rating must be observed.
Note 3: Unused inputs must be held HIGH or LOW. They may not float.
DC Electrical Characteristics
Symbol
VIH
Parameter
HIGH Level
Input Voltage
VIL
LOW Level
Input Voltage
VCC
TA = +25°C
(V)
Min
0.90
Max
HIGH Level
Output Voltage
Min
0.65 x VCC
0.65 x VCC
1.10 ≤ VCC ≤ 1.30 0.65 x VCC
0.65 x VCC
1.40 ≤ VCC ≤ 1.60 0.65 x VCC
0.65 x VCC
1.65 ≤ VCC ≤ 1.95 0.65 x VCC
0.65 x VCC
2.30 ≤ VCC ≤ 2.70
1.6
3.00 ≤ VCC ≤ 3.60
2.1
Units
Conditions
Max
V
1.6
2.1
0.90
0.35 x VCC
0.35 x VCC
1.10 ≤ VCC ≤ 1.30
0.35 x VCC
0.35 x VCC
1.40 ≤ VCC ≤ 1.60
0.35 x VCC
0.35 x VCC
1.65 ≤ VCC ≤ 1.95
0.35 x VCC
0.35 x VCC
2.30 ≤ VCC ≤ 2.70
0.7
0.7
3.00 ≤ VCC ≤ 3.60
VOH
TA = −40°C to +85°C
0.9
V
0.9
0.90
VCC − 0.1
VCC − 0.1
1.10 ≤ VCC ≤ 1.30
VCC − 0.1
VCC − 0.1
1.40 ≤ VCC ≤ 1.60
VCC − 0.1
VCC − 0.1
1.65 ≤ VCC ≤ 1.95
VCC − 0.1
VCC − 0.1
2.30 ≤ VCC ≤ 2.70
VCC − 0.1
VCC − 0.1
3.00 ≤ VCC ≤ 3.60
VCC − 0.1
VCC − 0.1
1.10 ≤ VCC ≤ 1.30 0.75 x VCC
0.70 x VCC
IOH = −0.5 mA
IOH = −20 µA
V
1.40 ≤ VCC ≤ 1.60
1.07
0.99
IOH = −1.0 mA
1.65 ≤ VCC ≤ 1.95
1.24
1.22
IOH = −1.5 mA
2.30 ≤ VCC ≤ 2.70
1.95
1.87
IOH = −2.1 mA
3.00 ≤ VCC ≤ 3.60
2.61
2.55
IOH = −2.6 mA
3
www.fairchildsemi.com
NC7WP02
Absolute Maximum Ratings(Note 1)
NC7WP02
DC Electrical Characteristics
Symbol
TA = +25°C
VCC
Parameter
(V)
VOL
LOW Level
Output Voltage
IIN
Input Leakage Current
IOFF
Power Off Leakage Current
ICC
Quiescent Supply Current
(Continued)
Min
Max
TA = −40°C to +85°C
Min
Units
Conditions
Max
0.90
0.1
0.1
1.10 ≤ VCC ≤ 1.30
0.1
0.1
1.40 ≤ VCC ≤ 1.60
0.1
0.1
1.65 ≤ VCC ≤ 1.95
0.1
0.1
2.30 ≤ VCC ≤ 2.70
0.1
0.1
IOL = 20 µA
3.00 ≤ VCC ≤ 3.60
0.1
0.1
1.10 ≤ VCC ≤ 1.30
0.30 x VCC
0.30 x VCC
IOL = 0.5 mA
1.40 ≤ VCC ≤ 1.60
0.31
0.37
IOL = 1.0 mA
1.65 ≤ VCC ≤ 1.95
0.31
0.35
IOL = 1.5 mA
2.30 ≤ VCC ≤ 2.70
0.31
0.33
IOL = 2.1 mA
3.00 ≤ VCC ≤ 3.60
0.31
0.33
0.90 to 3.60
±0.1
±0.5
µA
0 ≤ VI ≤ 3.6V
0
0.5
0.5
µA
0 ≤ (VI, VO) ≤ 3.6V
0.90 to 3.60
0.9
0.9
µA
VI = VCC or GND
V
IOL = 2.6 mA
AC Electrical Characteristics
Symbol
tPHL
Parameter
Propagation Delay
tPLH
tPHL
Propagation Delay
tPLH
tPHL
Propagation Delay
tPLH
TA = +25°C
VCC
(V)
Min
0.90
Typ
TA = −40°C to +85°C
Max
Min
Max
Units
4.0
9.0
20.7
3.5
30.9
1.40 ≤ VCC ≤ 1.60
2.0
6.0
12.4
1.5
13.9
1.65 ≤ VCC ≤ 1.95
1.5
5.0
9.6
1.0
12.1
2.30 ≤ VCC ≤ 2.70
1.0
4.0
7.0
0.8
8.0
3.00 ≤ VCC ≤ 3.60
1.0
3.0
5.7
0.5
6.9
0.90
ns
CL = 10 pF
RL = 1 MΩ
Figures
1, 2
27.0
1.10 ≤ VCC ≤ 1.30
5.0
10.0
22.2
4.5
33.9
1.40 ≤ VCC ≤ 1.60
3.0
7.0
13.3
2.5
16.0
1.65 ≤ VCC ≤ 1.95
2.0
5.0
10.3
2.0
12.6
2.30 ≤ VCC ≤ 2.70
1.5
4.0
7.4
1.0
8.2
3.00 ≤ VCC ≤ 3.60
1.0
3.0
6.1
0.5
7.0
0.90
ns
CL = 15 pF
RL = 1 MΩ
Figures
1, 2
34.0
1.10 ≤ VCC ≤ 1.30
6.0
12.0
26.0
5.0
43.0
1.40 ≤ VCC ≤ 1.60
4.0
8.0
16.0
3.0
18.0
1.65 ≤ VCC ≤ 1.95
2.0
6.0
12.0
2.0
14.0
2.30 ≤ VCC ≤ 2.70
1.0
5.0
9.0
1.0
10.0
3.00 ≤ VCC ≤ 3.60
0.8
4.0
7.0
0.5
8.9
ns
Input Capacitance
0
2.0
pF
COUT
Output Capacitance
0
4.0
pF
CPD
Power Dissipation
0.9 to 3.60
6.0
pF
www.fairchildsemi.com
Figure
Number
24.0
1.10 ≤ VCC ≤ 1.30
CIN
Capacitance
Conditions
4
CL = 30 pF
RL = 1 MΩ
VI = 0V or VCC,
f = 10 MHz
Figures
1, 2
NC7WP02
AC Loading and Waveforms
FIGURE 1. AC Test Circuit
FIGURE 2. AC Waveforms
Symbol
VCC
3.3V ± 0.3V
2.5V ± 0.2V
1.8V ± 0.15V
1.5V ± 0.10V
1.2V ± 0.10V
0.9V
Vmi
1.5V
VCC/2
VCC/2
VCC/2
VCC/2
VCC/2
Vmo
1.5V
VCC/2
VCC/2
VCC/2
VCC/2
VCC/2
5
www.fairchildsemi.com
NC7WP02
Tape and Reel Specification
TAPE FORMAT for US8
Package
Tape
Number
Cavity
Section
Cavities
Status
Status
Leader (Start End)
125 (typ)
Empty
Sealed
Designator
K8X
Cover Tape
Carrier
3000
Filled
Sealed
Trailer (Hub End)
75 (typ)
Empty
Sealed
Cover Tape
TAPE DIMENSIONS inches (millimeters)
TAPE FORMAT for MicroPak
Package
Designator
L8X
Tape
Number
Cavity
Section
Cavities
Status
Status
Leader (Start End)
125 (typ)
Empty
Sealed
Carrier
3000
Filled
Sealed
Trailer (Hub End)
75 (typ)
Empty
Sealed
TAPE DIMENSIONS inches (millimeters)
www.fairchildsemi.com
6
NC7WP02
Tape and Reel Specification
(Continued)
REEL DIMENSIONS inches (millimeters)
Tape
Size
8 mm
A
B
C
D
N
W1
W2
W3
7.0
0.059
0.512
0.795
2.165
0.331 + 0.059/−0.000
0.567
W1 + 0.078/−0.039
(177.8)
(1.50)
(13.00)
(20.20)
(55.00)
(8.40 + 1.50/−0.00)
(14.40)
(W1 + 2.00/−1.00)
7
www.fairchildsemi.com
NC7WP02
Physical Dimensions inches (millimeters) unless otherwise noted
8-Lead US8, JEDEC MO-187, Variation CA 3.1mm Wide
Package Number MAB08A
www.fairchildsemi.com
8
NC7WP02 TinyLogic ULP Dual 2-Input NOR Gate
Physical Dimensions inches (millimeters) unless otherwise noted (Continued)
8-Lead MicroPak, 1.6 mm Wide
Package Number MAC08A
Fairchild does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and
Fairchild reserves the right at any time without notice to change said circuitry and specifications.
LIFE SUPPORT POLICY
FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT
DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD
SEMICONDUCTOR CORPORATION. As used herein:
2. A critical component in any component of a life support
device or system whose failure to perform can be reasonably expected to cause the failure of the life support
device or system, or to affect its safety or effectiveness.
1. Life support devices or systems are devices or systems
which, (a) are intended for surgical implant into the
body, or (b) support or sustain life, and (c) whose failure
to perform when properly used in accordance with
instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the
user.
www.fairchildsemi.com
9
www.fairchildsemi.com