DKIP-1 Suppression Chokes www.schurter.com/pg81_82 Compensated High Current Choke, 1-phase Description Applications -Current compensated choke -1‑phase choke -Flexible wire -Flange for mounting onto printed circuit board -Fully potted resign -Placed in front of frequency converter -Stepper motor drives -UPS-systems -Inverter References Standards General Product Information -EN 60938 -IEC 60950 -EN 55011/55014 -VDE 0871/0875 Weblinks Approvals, RoHS, CHINA-RoHS, e-Store, Distributor-Stock-Check Technical Data Rated voltage Rated voltage Rated Current Rated inductance Power Operating Frequency Terminal technic Weight Material: Housing Sealing Compound up to 540 VAC up to 760 VDC 10 - 50 A @ Ta 40 °C 1.1 - 12 mH, Tol. -30% +50% 50 - 400 Hz Flexible wire 145 - 1865 g UL 94V-0 UL 94V-0 Dimensions Case 29-2W 50.8 80 150 65 10...20 80 5.8 6.8 230 10...20 65 30.8 48 48 2.5 kV, 50 Hz, 2 sec, winding to winding 2.5 kV, 50 Hz, 2 sec, winding to ambient 25/100/21 acc. to IEC 60068-1 -25 °C to 100 °C Case 31-2W 38.2 38.2 Test Voltage Isolation Voltage Climatic Category Allowable Operation Temp. 4.3 3.1 EMC Products DKIP-1 Suppression Chokes www.schurter.com/pg81_82 Case 33-2W 70 120 230 10...20 8 100 120 100 5.25 Variants In [A] Ln [mH] Rcu [mΩ] Tripped Power Dissipation [W] fRES [MHz] Copper ø [mm] Weight [g] Housing Packing unit [pcs.] Order Number 10 5 18 3.6 0.35 1.25 145 29-2W 6 DKIP-0229-1005 15 2 8 3.6 0.6 1.6 145 29-2W 6 DKIP-0229-1502 20 1.1 6 4.8 2.5 1.8 145 29-2W 6 DKIP-0229-2001 10 12 40 8 0.15 1.25 477 31-2W 2 DKIP-0231-1012 15 5 17 7.6 0.33 1.6 525 31-2W 2 DKIP-0229-1505 20 3 10 8 0.55 1.8 506 31-2W 2 DKIP-0231-2003 30 5 12.5 22.5 0.26 2.24 1600 33-2W 1 DKIP-0233-3005 40 3 6 19.2 0.3 1.5 x 4.5 1830 33-2W 1 DKIP-0233-4003 50 2 5 25 0.25 1.5 x 4.5 1865 33-2W 1 DKIP-0233-5002 The specifications, descriptions and illustrations indicated in this document are based on EMC Products current information. All content is subject to modifications and amendments.