FMAC ECO 3-Phase Filters www.schurter.com/pg80 Ultra compact and efficient 1-stage filter in ECO design for 3-phase systems Description -High attenuation value -Cost optimized filter design with excellent price / perfomance ratio -Very light due to partial potting Standards Applications -Voltage rating 480 VAC for world wide acceptance -Especially designed for industrial applications such as: Frequency Converters, Stepper Motor Drives, UPS-Systems, Inverters -Qualified for use in equipment according IEC/EN 60950 -IEC 60939 -UL 1283 References Approvals Weblinks Technical Data Rated Current Rated voltage Approval for Mounting -VDE License Number: pending -UL License Number: pending 16 - 150 A @ Ta 40 °C 480 VAC, 50/60 Hz 16 - 150 A @ Ta 40 °C / 480 VAC; 50/60 Hz Overload Current 1.5 x Ir Leakage Current < 33 mA (440 V / 50 Hz) Dielectric Strength for 480 VAC > 2.25 kVDC between L-L > 3 kVDC between L-PE Test voltage 2 sec Number of Filter Stages 1 Weight 1 - 7 kg Sealing Compound UL 94V-0 General Product Information Approvals, RoHS, CHINA-RoHS, e-Store, Distributor-Stock-Check Terminal Operating Temperature [°C] Climatic Category Degree of Protection Protection Class MTBF EMC Products Screw-on mounting on chassis, upright or lengthwise Screw terminals -25 °C to 100 °C 25/100/21 acc. to IEC 60068-1 IP 20 acc. to IEC 60529 Suitable for appliances with protection class 1 acc. to IEC 61140 > 200'000 h acc. to MIL-HB-217 F FMAC ECO 3-Phase Filters www.schurter.com/pg80 Dimensions Case 1C max. 250 (23) (199) (32) max. 70 M5x13; 2.0-2.5 Nm (62) (17) (242) +0 235 –2 +0 25 ±0.3 4.3±0.3 1) 2) 4 mm2; 0.5-0.6 Nm 5.4±0.3 38±0.3 max. 45.5 221 –2 1) Line 2) Load Case 1D-6 max. 265 max. 58 +0 235 –2 (10) (23) 5.4±0.3 (199) (15) (44) (80) 60 ±0.3 max. 90 M6x14; 3-4 Nm +0 1) 2) 6 mm2: 1.5-1.8 Nm (32.5) 30 ±0.3 35±0.3 7.8±0.3 255 –2 (4x) (M5+DIN9021) 1) Line 2) Load EMC Products FMAC ECO 3-Phase Filters www.schurter.com/pg80 Case 1D-10 max. 265 max. 58 +0 235 –2 (10) (23) 5.4±0.3 (199) (80) (15) (44) 60 ±0.3 max. 90 M6x14; 3-4 Nm +0 10 mm2: 1.5-1.8 Nm 2) (32.5) 1) 30 ±0.3 35±0.3 7.8±0.3 255 –2 (4x) (M5+DIN9021) 1) Line 2) Load Case 1E max. 265 +0 255 –2 max. 141 (117) 2) 25 mm2 (11) (18) 1) 4.5±0.3 35 ±0.3 max. 58 (10) (200) (36) +0 2-2.5 Nm 110±0.3 4.5±0.3 (15) 235 –2 M6; 3-4 Nm 1) Line 2) Load EMC Products FMAC ECO 3-Phase Filters www.schurter.com/pg80 Case 1T max. 320 max. 80 (240) (100) (85) (59) M6x14; 3-4 Nm max. 135 (42) (10.5) (270) +0 6.5±0.3 255 –2 60±0.3 25 mm2: 4-4.5 Nm 1) 2) 1) Line 2) Load Case 1G max. 330 max. 90 (48) max. 150 (240) M10; 10-17 Nm 3) (60) (108) 3) (26) (270) +0 6.5±0.3 255 –2 65±0.3 50 mm2: 6-8 Nm 1) 2) 1) Line 2) Load 3) Do not unscrew lock-nut, keep lock-nut fastened while tightening EMC Products FMAC ECO 3-Phase Filters www.schurter.com/pg80 Technical data to the filter components Rated Current [A] L [mH] C1 [μF] C2 [μF] C3 [μF] R1 [MΩ] R2 [MΩ] Filter-Type 110 0.55 6.6 6.6 3.3 1 1 Industrial Version 150 0.48 6.6 6.6 3.3 1 1 Industrial Version 16 0.55 2.2 2.2 3.3 1 1 Industrial Version 25 0.45 2.2 2.2 3.3 1 1 Industrial Version 36 0.57 2.2 2.2 3.3 1 1 Industrial Version 43/80 0.55 4.7 4.7 3.3 1 1 Industrial Version 50 0.65 4.7 3.3 3.3 1 1 Industrial Version 55 0.75 4.7 3.3 3.3 1 1 Industrial Version 64 0.55 4.7 4.7 3.3 1 1 Industrial Version Diagrams 1) 2) 1) Line 2) Load Attenuation Loss Industrial Version - - - - differential mode _____ common mode 16A (FMAC-091C-1610) 25A (FMAC-091C-2510) 36A (FMAC-091D-3610) 50A (FMAC-091D-5010) 55A (FMAC-091D-5510) 64A (FMAC-091E-6410) 80A (FMAC-091T-8010) 110A (FMAC-091G-H110) 150A (FMAC-091G-H210) EMC Products FMAC ECO 3-Phase Filters www.schurter.com/pg80 Variants Rated Current Characteristic @ Ta 40°C (75°C) [A] Rated Voltage [VAC] Tripped Po- Leakage Curwer Dissipa- rent [mA] 1) tion [W] Contact Resistance [mΩ] Weight [kg] Screw clamps [mm2] 2) Housing Order Number 16 High attenuation 480 6 96 7.6 1 4 1C FMAC-091C-1610 25 High attenuation 480 8 96 4.1 1 4 1C FMAC-091C-2510 36 High attenuation 480 10 96 2.5 1.3 6 1D-6 FMAC-091D-3610 50 High attenuation 480 13 103 1.7 1.7 10 1D-10 FMAC-091D-5010 55 High attenuation 480 14 103 1.5 1.7 10 1D-10 FMAC-091D-5510 64 High attenuation 480 17 103 1.4 2 25 1E FMAC-091E-6410 43/80 High attenuation 480 22 110 1.1 5.1 25 1T FMAC-091T-8010 110 High attenuation 480 28 110 0.8 5.8 50 1G FMAC-091G-H110 150 High attenuation 480 40 110 0.6 7 50 1G FMAC-091G-H210 2) Maximum conductor cross section (wire gauge) to be used; a comparative table for AWG and mm² values can be found in the general product information www.schurter.com/ emc_info 1) Worst case leakage current acc. to IEC60950 - Annex G4 (situation with two interrupted lines). Nominal leakage current acc. to IEC60950 - 5.2.5. can be found in section technical data. Packaging unit 1 Pcs The specifications, descriptions and illustrations indicated in this document are based on EMC Products current information. All content is subject to modifications and amendments.