GRF4 Power Entry Modules with Line Filter www.schurter.com/pg06 IEC Appliance Inlet C14 with Filter, "Lock and Shield" Mounting Standard- or Medical-Filter GRF4: with shield and line filter C14 70° C Description -Panel Mount: Snap-in version from rear-side -3 Functions: Appliance Inlet Protection class I, with EMC-shield, Line filter in standard and medical version -Alternative: version without line filter GRF2 Characteristics -Time saving "Lock and Shield" snap-in design for rear-panel mounting -All single elements are already wired -Innovative EMC-shielding with flexible steel segments for an excellent contact to the panel -Qualified for use in equipment according IEC/EN 60950 Other versions on request -Panel thickness 1.2 mm and 2.0 mm Approvals -VDE License Number: 102348 -UL License Number: E72928 -CSA License Number: 701867 References General Product Information Weblinks Approvals, RoHS, CHINA-RoHS, Mating Connectors, e-Store, Distributor-Stock-Check, Accessories Technical Data Ratings IEC Ratings UL/CSA Leakage Current Dielectric Strength Allowable Operation Temp. Climatic Category Degree of Protection Protection Class Terminal Panel Thickness s Material: Housing 0.5 - 10 A @ Ta 40 °C / 250 VAC; 50 Hz 0.5 - 15 A @ Ta 40 °C / 125 VAC; 60 Hz standard < 0.5 mA (250 V / 60 Hz) medical < 5 µA (250 V / 60 Hz) > 1.7 kVDC between L-N > 2.7 kVDC between L/N-PE Test voltage (2 sec) -25 °C to 85 °C 25/085/21 acc. to IEC 60068-1 from front side IP 40 acc. to IEC 60529 Suitable for appliances with protection class 1 acc. to IEC 61140 Quick connect terminals 4.8 x 0.8 mm Snap-in: 1.5 mm (other on request) Thermoplastic, black, UL 94V-0 Dimensions GRF4 Appliance-Inlet/-Outlet C14 acc. to IEC/EN 60320-1, UL 498, CSA C22.2 no. 42 (for cold conditions) pin-temperature 70 °C, 10 A, Protection Class 1 Standard and Medical Version, IEC 60939, IEC 60601‑1, UL 1283, UL 544, EN 133 200, CSA C22.2 no. 8 Technical details > 3'300'000 h acc. to MIL-HB-217 F Line Filter MTBF 30.25 4.8 +0.2 24.2 ±0.3 M4 24.3 22.9 1) max. R1.5 22.6 59.3 1) 20.8 ±0.1 28.3 M4 4.8x0.8 25.2 6.13 30.5 ±0.1 31.4 S ±0.1 1) Terminal for earth screw M4 This area must be conductive for optimal shielding. Do not apply paint or coatings. EMC Products GRF4 Power Entry Modules with Line Filter www.schurter.com/pg06 Technical Data of Filter-Components Rated Current [A] Filter-Type Inductances L [mH] Capacitance CX [nF] Capacitance CY [nF] R [MΩ] 0.5 Standard Version 2 x 24 100 2.2 - 1 Standard Version 2 x 12 100 2.2 - 3 Standard Version 2 x 2.5 100 2.2 - 6 Standard Version 2 x 0.78 100 2.2 - 10 Standard Version 2 x 0.225 100 2.2 - 15 Standard Version 2 x 0.075 100 2.2 - 0.5 Medical Version (M5) 2 x 24 100 - 1 1 Medical Version (M5) 2 x 12 100 - 1 3 Medical Version (M5) 2 x 2.5 100 - 1 6 Medical Version (M5) 2 x 0.78 100 - 1 10 Medical Version (M5) 2 x 0.225 100 - 1 15 Medical Version (M5) 2 x 0.075 100 - 1 Dimensions Step 1 Place the socket in top edge of the panel cut-out. Step 2 Step 3 Push the socket upwards. Push the socket forward into the panel cut-out. Step 4 Release the socket. The component is self adjusting. Diagrams Standard version Medical version 1) Line 2) Load 1) Line 2) Load EMC Products GRF4 Power Entry Modules with Line Filter www.schurter.com/pg06 Attenuation Loss - - - - differential mode _____ common mode Standard version 0.5 A 1A 10 A 15A Medical version (M5) 0.5 A 1A 10 A 15A 3A 6A 3A 6A Variants Rated Current IEC [A] Rated Current UL [A] Filter-Type Panel Thickness s [mm] Order Number 0.5 0.5 Standard Version 1 GRF4.0411.011.C 1 1 Standard Version 1 GRF4.0412.011.C 6 6 Standard Version 1 GRF4.0416.011.C 10 10 Standard Version 1 GRF4.0417.011.C 0.5 0.5 Standard Version 1.5 GRF4.0411.013.C 1 1 Standard Version 1.5 GRF4.0412.013.C 3 3 Standard Version 1.5 GRF4.0413.013.C 6 6 Standard Version 1.5 GRF4.0416.013.C 10 10 Standard Version 1.5 GRF4.0417.013.C 15 15 Standard Version 1.5 GRF4.0419.013.C 3 3 Standard Version 2 GRF4.0413.014.C 0.5 0.5 Medical Version (M5) 1.5 GRF4.0021.013.C 1 1 Medical Version (M5) 1.5 GRF4.0022.013.C 3 3 Medical Version (M5) 1.5 GRF4.0023.013.C 6 6 Medical Version (M5) 1.5 GRF4.0026.013.C 10 10 Medical Version (M5) 1.5 GRF4.0027.013.C 15 15 Medical Version (M5) 1.5 GRF4.0029.013.C Articles with packing unit 200 (without ending ".C") are no longer available EMC Products GRF4 Power Entry Modules with Line Filter www.schurter.com/pg06 Packaging unit 20 Pcs Mating Outlets/Connectors Category / Description Appliance Outlet Overview complete IEC Appliance Outlet F, Screw-on Mounting, Front Side, Solder or Quick-connect Terminal 4787 IEC Appliance Outlet F, Snap-in Mounting, Front Side, Solder or Quick-connect Terminal 4788 IEC Appliance Outlet F or H, Screw-on Mounting, Front Side, Solder, PCB or Quick-connect Terminal 5091 IEC Appliance Outlet F or H, Screw-on Mounting, Front Side, Solder or Quick-connect Terminal 5092 Appliance Outlet further types to GRF4 Connector Overview complete IEC Connector C15, Rewireable, Straight 0101 IEC Connector C15A, Rewireable, Straight 0102 IEC Connector C15A, Rewireable, Straight 0102-G IEC Connector C15A, Rewireable, Angled 0112 IEC Connector C13, Rewireable, Angled 4012 Connector further types to GRF4 ... Power Cord Overview complete Power Cord with IEC Connector C13, Angled 0311 Power Cord with IEC Connector C13, Angled 3011 Power Cord with IEC Connector C13, Angled 3012 Power Cord with IEC Connector C13, Angled 3013 Power Cord with IEC Connector C13 3020 Power Cord further types to GRF4 ... The specifications, descriptions and illustrations indicated in this document are based on EMC Products current information. All content is subject to modifications and amendments.