KE Power entry modules without line filter www.schurter.com/pg05 IEC Appliance Inlet C14 with Fuseholder 1- or 2-pole and Voltage Selector Standard or Medical Fuse drawer C14 70° C Description -Panel Mount: Screw-on version from front or rear side, snap-in version from front side -3 Functions: Appliance Inlet Protection class I, Fuseholder with interchangeable fuse drawer for Fuse-links 5 x 20 mm or 6.3 x 32 mm 1‑ or 2‑pole, Voltage Selectors (series-parallel) -Quick connect terminals 4.8 x 0.8 mm -Alternative: version with line filter CE Approvals Terminal Panel Thickness s Material: Housing Other versions on request -For protection class II References Weblinks Approvals, RoHS, CHINA-RoHS, Mating Connectors, e-Store, Distributor-Stock-Check, Accessories Technical Data Allowable Operation Temp. Degree of Protection Protection Class -Available with or without internal partial wired connections -For added safety "Extra-Safe" fuse drawers are available Fuse drawer meets requirements of medical standard IEC/EN 60601-1 The fuse drawer can only be opened with the aid of a tool The fuseholder is accessible from the equipment front -Qualified for use in equipment according IEC/EN 60950 General Product Information -VDE License Number: 40011908 -UL License Number: E93617 -CSA License Number: 38456 Ratings IEC Ratings UL/CSA Dielectric Strength Characteristics 10 A / 250 VAC; 50 Hz 10 A / 125 VAC; 60 Hz > 3 kVAC between L-N > 4 kVAC between L/N-PE (1 min/50 Hz) -25 °C to 70 °C from front side IP 40 acc. to IEC 60529 Suitable for appliances with protection class 1 acc. to IEC 61140 Quick connect terminals 4.8 x 0.8 mm Screw: max 8 mm Mounting screw torque max 0.5 Nm Snap-in: 1.5/2/2.5 mm Thermoplastic, black, UL 94V-0 Appliance Inlet Fuseholder Rated Power Acceptance @ Ta 23 °C Power Acceptance @ Ta > 23°C Voltage Selectors Connectors C14 acc. to IEC/EN 60320-1, UL 498, CSA C22.2 no. 42 (for cold conditions) pin-temperature 70 °C, 10 A, Protection Class 1 1 or 2 pole, Shocksafe category PC2 acc. to IEC 60127-6, for fuse-links 5 x 20 or 6.3 x 32 mm 5 x 20: 2.5 W (1 pole)/ 2 W (2-pole) per pole 6.3 x 32: 3.15 W (1 pole)/ 2.5 W (2-pole) per pole Admissible power acceptance at higher ambient temperature see derating curves series-parallel, 4, 3 or 2 switch positions or usable as 2-pole change-over switch KE Power entry modules without line filter www.schurter.com/pg05 Dimensions Screw on PCB mounting 55 S ±0.1 4.8x0.8 +0.3 0 52.5 52.2 61.5 ±0.15 +0.3 0 52.5 52.2 R 4.5 230 ø 6.3x90˚ ø 3.2 4.8x0.8 30 230 69.5 61.5 55 M3/ø 3.6 R6 55 30 R 4.5 69.5 mm Snap-in mounting 0 0 R 3 -0.2 R 3 -0.2 18 18 R 3.1 2 2.2 27.5 27.2 Diagrams with partial wired internal connections with partial wired 2.0 I = 1.0 In 1.5 I = 0.7 In I = < < In 1.0 0.5 0.0 0 20 40 60 80 100 Admissible power acceptance in Watt per pole Admissible power acceptance in Watt 2.0 Ambient air temperature Ta °C 1.5 I = 1.0 In I = 0.7 In 1.0 I = < < In 0.5 0.0 0 20 40 60 80 100 40 60 80 100 Ambient air temperature Ta °C Fuses 6.3 x 32 mm (1-pole) Fuses 6.3 x 32 mm (2-pole, per pole) 3.15 2.5 2.5 I = 1.0 In 2.0 I = 0.7 In 1.5 I = << In 1.0 0.5 0.0 0 20 40 60 80 100 Admissible power acceptance in Watt per pole Admissible power acceptance in Watt 2-pole Fuses 5 x 20 mm (2-pole, per pole) 2.5 Ambient air temperature Ta °C 27.5 2.0 I = 1.0 In 1.5 I = 0.7 In I = < < In 1.0 0.5 0.0 0 20 Ambient air temperature Ta °C Connectors +0.2 0 without internal connections 1-pole Derating Curves Fuses 5 x 20 mm (1-pole) 2 2.2 27.5 27.2 without internal connections 2-pole 1-pole R 3.1 +0.2 27.5 0 KE Power entry modules without line filter www.schurter.com/pg05 Variants Fuseholder and voltage selector insert must be ordered separately Panel mounting Panel Thickness s [mm] Fuseholder Internally wired Order Number Screw - 1-pole unwired KE15.1100.151 Screw - 1-pole partially wired KE16.5100.151 Screw - 2-pole unwired KE10.2100.151 Screw - 2-pole partially wired KE10.6100.151 Snap-in 1.5 1-pole unwired KE15.1100.105 Snap-in 2 1-pole unwired KE15.1100.107 Snap-in 2.5 1-pole unwired KE15.1100.109 Snap-in 1.5 1-pole partially wired KE16.5100.105 Snap-in 2 1-pole partially wired KE16.5100.107 Snap-in 2.5 1-pole partially wired KE16.5100.109 Snap-in 1.5 2-pole unwired KE10.2100.105 Snap-in 2 2-pole unwired KE10.2100.107 Snap-in 2.5 2-pole unwired KE10.2100.109 Snap-in 1.5 2-pole partially wired KE10.6100.105 Snap-in 2 2-pole partially wired KE10.6100.107 Snap-in 2.5 2-pole partially wired KE10.6100.109 Packaging unit 20 Pcs Required Accessory Description Jumper Wire 1 Connection with Stranded Cable Type B, 100 0881.0074 Type B, 100 0881.0075 Type A, 100 0881.0076 Type A, 100 0881.0077 Fusedrawer 1 Fusedrawer for Fuse Links 5x20mm resp.. 6.3x32mm 5 x 20, 2-pole 4305.0001 5 x 20, 1-pole 4305.0006 6.3 x 32, 2-pole 4305.0011 6.3 x 32, 1-pole 4305.0016 ... Voltage Selectors Insert 1 Voltage Selector Insert to KE, CE, KG, CG 3 or 4 switch positions 4305.0048.00 1, 3 or 4 switch positions, 100, 120, 220, 240 4305.0048.01 3, 3 or 4 switch positions, 130, 110, 240, 220 4305.0048.02 2, 2 switch positions, 110, 220 4305.0048.03 ... Connectors KE Power entry modules without line filter www.schurter.com/pg05 Accessories Assorted Covers Rear Cover 0859.0076 Cord retaining kits Cord retaining strain relief Flat head, A 4700.0001 Mating Outlets/Connectors Category / Description Appliance Outlet Overview complete IEC Appliance Outlet F, Screw-on Mounting, Front Side, Solder or Quick-connect Terminal 4787 IEC Appliance Outlet F, Snap-in Mounting, Front Side, Solder or Quick-connect Terminal 4788 IEC Appliance Outlet F or H, Screw-on Mounting, Front Side, Solder, PCB or Quick-connect Terminal 5091 IEC Appliance Outlet F or H, Screw-on Mounting, Front Side, Solder or Quick-connect Terminal 5092 Appliance Outlet further types to KE Connector Overview complete IEC Connector C15, Rewireable, Straight 0101 IEC Connector C15A, Rewireable, Straight 0102 IEC Connector C15A, Rewireable, Straight 0102-G IEC Connector C15A, Rewireable, Angled 0112 IEC Connector C13, Rewireable, Angled 4012 Connector further types to KE ... Power Cord Overview complete Power Cord with IEC Connector C13, Angled 0311 Power Cord with IEC Connector C13, Angled 3011 Power Cord with IEC Connector C13, Angled 3012 Power Cord with IEC Connector C13, Angled 3013 Power Cord with IEC Connector C13 3020 Power Cord further types to KE ... The specifications, descriptions and illustrations indicated in this document are based on Connectors current information. All content is subject to modifications and amendments.