SCHURTER KP01105201

KP (Outlet)
Power entry modules without line filter
www.schurter.com/pg05
IEC Appliance Inlet C14 with Appliance Outlet F
Inlet with outlet
KPF Filter Module
(not enclosed)
C14
F
70° C
70° C
Description
Characteristics
-Panel Mount:
Sandwich/rear-side
-2 Functions:
Appliance Inlet Protection class I, Connector Protection class I
-For PCB mounting
-Alternative: version with line filter KPF; KPS -Panel mount from rear or "sandwich" between top and bottom/side to
side panels
PCB mount with snap-in or screw-on <BREAK/> feet (self tapping
screws Ø 3 x 8 mm)
-All single elements are already wired
-Insulation cover on the rear-side
-Qualified for use in equipment according IEC/EN 60950
Approvals
Other versions on request
-VDE License Number: 40008635
-UL License Number: E103791
-CSA License Number: 38456
-Solder terminals
-Quick-connect terminals
-For protection class II
References
General Product Information
Weblinks
Approvals, RoHS, CHINA-RoHS, Mating Connectors, e-Store,
Distributor-Stock-Check, Accessories
Technical Data
Ratings IEC
Ratings UL/CSA
Dielectric Strength
Allowable Operation Temp.
Degree of Protection
Protection Class
Terminal
Panel Thickness s
Material: Housing
10 A / 250 VAC; 50 Hz
10 A / 125 VAC; 60 Hz
> 2.3 kVAC between L-N
> 2.8 kVAC between L/N-PE
(1 min/50 Hz)
-25 °C to 70 °C
from front side IP 40 acc. to IEC 60529
Suitable for appliances with protection
class 1 acc. to IEC 61140
For PCB mounting Quick connect terminals 4.8 x 0.8 mm
Solder terminal on request
Snap-in: 1.5/2/2.5/3 mm
Thermoplastic, black, UL 94V-0
Appliance Inlet / Appliance
Outlet
Connectors
C14 acc. to IEC/EN 60320-1
and F acc. to IEC/EN 60320-2-2,
UL 498, CSA C22.2 no. 42 (for cold
conditions) pin-temperature 70 °C, 10 A,
Protection Class 1
KP (Outlet)
Power entry modules without line filter
www.schurter.com/pg05
Dimensions
Screw on PCB mounting
56.1 mm
Snap-in mounting
56.1
27.8
2
2
31.2
52.1
27.8
2
32
36.5
2
R2
18.5
1.3
1.1
6.2
50.1
S ±0.1
S ±0.1
16
50.1
16
53.34
A = for PCB-thickness 1.2/1.6/2.0/2.4 mm
Additional quick connect terminal 4.8 x 0.8 mm
Additional quick connect terminal 4.8 x 0.8 mm
s = panel thickness
For 2-pole inlet/switch, 2-pole inlet
fuseholder and inlet/outlet
for combinations:
inlet/switch 1-pole
Inlet/ fuseholder 1-pole
53.34
13.97
10.16
S
+0.1
0
D2
7.55
D2
±0.1
D1
25.4
1.6
+0.1
0
D1
1.6
(16.45)
3.82
27.94
5.08
7.62
X ±0.1
S and X see mounting holes
32.3 ±0.1
Sandwich mounting holes
32.3 ±0.1
Sandwich mounting holes
18.5
32.3 ±0.1
Mounting holes for backside mounting
X ±0.1
X ±0.1
52.4 ±0.1
X = 48.4 at S = 1.5 and 2.5
X = 50.4 at S = 2.0 and 3.0
X = 48.4 at S = 1.5 and 2.5
X = 50.4 at S = 2.0 and 3.0
Dimensions
Stable snap feet requires minimal
insertion force
0.8
0
ø 5.9 -0.1
1.1
53.34
25.4
4.5
1.3
20.2
2.9
0.8
ø 5.9
1.1
4.5
2
A
1.3
1.1
4.5
2.5
2
18.5
36
36.5
2
R2
32
36
56.1
31.2
52.1
1.6 ±0.1
2
Module must lay flat on the PCB when
soldering
Screw-on mount
uses self-tapping screws
Connectors
10.16 10.16
1.3
20.2
6.2
KP (Outlet)
Power entry modules without line filter
www.schurter.com/pg05
Insertion from behind
"Sandwich" mounting with split
enclosure panels
Other dimensions as for 2-poles
d1 = 6 ± 0.05 for (snap-in)
d1 = 3.6 (screw-on)
d2 = 2 ± 0.1 (screw-on)
Dimensions without tolerance:
≤ 15 = ± 0.05; ≥ 15 = ± 0.1
Diagrams
Inlet with outlet
Derating Curves
1-pole
2-pole
1.5
I = 1.0 In
I = 0.7 In
1.0
I = << In
0.5
0.0
0
20
40
60
80
1.6
Admissible power acceptance in Watt
per pole
Admissible power acceptance in Watt
2.0
100
Ambient air temperature Ta °C
1.4
1.2
I = 1.0 In
1.0
0.8
I = 0.7 In
0.6
I = < < In
0.4
0.2
0.0
0
20
40
60
80
100
Ambient air temperature Ta °C
Variants
Panel mounting
Panel Thickness
s [mm]
PCB [mm]
Line Switch
Fuseholder
Connector
Order Number
Screw
2
1.2/1.6/2.0/2.4
-
-
F
KP01.1052.01
Screw
3
1.2/1.6/2.0/2.4
-
-
F
KP01.1053.01
Snap-in
2
1.6
-
-
F
KP01.1012.01
Snap-in
3
1.6
-
-
F
KP01.1013.01
Type KP without cover: KP01.XXXX.XX90
Ground Terminal with solder pin: KP01.XXXX.X3XX
Packaging unit 50 Pcs Connectors
KP (Outlet)
Power entry modules without line filter
www.schurter.com/pg05
Mating Inlets/Plugs
Category / Description
Interconnection Cord Overview complete
Interconnection Cord with IEC Plug E, Angled
0607
Interconnection Cord with IEC Plug E, Angled
0608
Interconnection Cord with IEC Plug E, Straight
0609
Interconnection Cord with IEC Plug G, Angled
607B
Interconnection Cord with IEC Plug G, Angled
608B
Interconnection Cord further types to KP (Outlet)
...
Plug Overview complete
IEC Plug E, Cord Connector (Rewireable), Straight, max. cable Diameter 8.5 mm
4732
IEC Plug E, Cord Connector (Rewireable), Angled, max. Cable Diameter 10 mm
4733
IEC Plug E, Cord Connector (Rewireable), Straight, max. Cable Diameter 10 mm
4735
IEC Plug E, Cord Connector (Rewireable), Angled, max. Cable Diameter 10 mm
4736
IEC Plug E, Cord Connector (Rewireable), Straight
9009
Plug further types to KP (Outlet)
...
Mating Outlets/Connectors
Appliance Outlet Overview complete
IEC Appliance Outlet F, Screw-on Mounting, Front Side, Solder or Quick-connect Terminal
4787
IEC Appliance Outlet F, Snap-in Mounting, Front Side, Solder or Quick-connect Terminal
4788
IEC Appliance Outlet F or H, Screw-on Mounting, Front Side, Solder, PCB or Quick-connect Terminal
5091
IEC Appliance Outlet F or H, Screw-on Mounting, Front Side, Solder or Quick-connect Terminal
5092
Appliance Outlet further types to KP (Outlet)
Connector Overview complete
IEC Connector C15, Rewireable, Straight
0101
IEC Connector C15A, Rewireable, Straight
0102
IEC Connector C15A, Rewireable, Straight
0102-G
IEC Connector C15A, Rewireable, Angled
0112
IEC Connector C13, Rewireable, Angled
4012
Connector further types to KP (Outlet)
...
Power Cord Overview complete
Power Cord with IEC Connector C13, Angled
0311
Power Cord with IEC Connector C13, Angled
3011
Power Cord with IEC Connector C13, Angled
3012
Power Cord with IEC Connector C13, Angled
3013
Power Cord with IEC Connector C13
3020
Power Cord further types to KP (Outlet)
...
The
specifications, descriptions and illustrations indicated in this document are based on
Connectors
current information. All content is subject to modifications and amendments.