KPF Power Entry Modules with Line Filter www.schurter.com/pg06 Filter for Backpack Mounting to KP01 Standard- or Medical-Filter KP01 Base Module (not enclosed) Description Characteristics -Component: Snap-in version from rear-side -1 Function: Line filter in standard and medical version -For PCB mounting -Only in combination with base-module type KP01 -Line filter for "backpack" mounting for modules type KP01 (snaps onto rear of KP01) -Electrical connection done on the PCB -Qualified for use in equipment according IEC/EN 60950 References General Product Information Approvals Weblinks -VDE License Number: 104869 -UL License Number: E72928 -CSA License Number: 97784 Approvals, RoHS, CHINA-RoHS, Mating Connectors, e-Store, Distributor-Stock-Check, Accessories Technical Data Ratings IEC Ratings UL/CSA Leakage Current Dielectric Strength Allowable Operation Temp. Climatic Category Degree of Protection Protection Class Terminal Material: Housing 1 - 10 A @ Ta 40 °C / 250 VAC; 50 Hz 1 - 10 A @ Ta 40 °C / 125 VAC; 60 Hz standard < 0.5 mA (250 V / 60 Hz) medical < 5 µA (250 V / 60 Hz) > 1.7 kVDC between L-N > 2.7 kVDC between L/N-PE Test voltage (2 sec) -25 °C to 70 °C 25/085/21 acc. to IEC 60068-1 from front side IP 40 acc. to IEC 60529 Suitable for appliances with protection class 1 acc. to IEC 61140 For PCB mounting Thermoplastic, black, UL 94V-0 Line Filter MTBF Dimensions 53.4 mm Standard and Medical Version, IEC 60939, IEC 60601‑1, UL 1283, UL 544, EN 133 200, CSA C22.2 no. 8 Technical details > 2'600'000 h acc. to MIL-HB-217 F 53.34 7.62 56.1 27.94 10.16 12.7 EMC Products 16.85 5.08 3.82 12.7 16.45 17.9 34.85 41.05 18.5 4.5 2 2.9 36.5 7.62 32 36 2 7.62 7.62 KPF Power Entry Modules with Line Filter www.schurter.com/pg06 Drilling diagram Layout to diagram A Drilling diagram Layout to diagram B 53.34 53.34 27.94 27.94 7.62 7.62 7.62 7.62 12.7 10.16 1) +0.1 0 (N’ L’ N L E) 1.6 1) Minimum ground plane +0.1 0 (N’ L’ N 1) Optimal ground plane Technical Data of Filter-Components Rated Current [A] Filter-Type Capacitance CX [nF] Capacitance CY [nF] R [MΩ] Standard Version 2 x 10 100 2.2 - 2 Standard Version 2x4 100 2.2 - 4 Standard Version 2x2 100 2.2 - 6 Standard Version 2x1 100 2.2 - 8 Standard Version 2 x 0.6 100 2.2 - 10 Standard Version 2 x 0.4 100 2.2 - 1 Medical Version (M5) 2 x 10 100 - 1 2 Medical Version (M5) 2x4 100 - 1 4 Medical Version (M5) 2x2 100 - 1 6 Medical Version (M5) 2x1 100 - 1 8 Medical Version (M5) 2 x 0.6 100 - 1 10 Medical Version (M5) 2 x 0.4 100 - 1 1) Line 2) Load Inductances L [mH] 1 Diagrams Standard line filter L E 8.9 3.82 8.9 3.82 1.6 N’ L’ N EMI filtering of equipment emissions 1) Line 2) Load EMC Products L E) 21.6 1) 12.7 E 21.6 L 12.7 N’ L’ N 7.62 7.62 7.62 7.62 12.7 10.16 KPF Power Entry Modules with Line Filter www.schurter.com/pg06 Attenuation Loss - - - - differential mode _____ common mode Standard version 1A 2A 8A 10 A Medical version (M5) 1A 2A 8A 10 A 4A 6A 4A 6A Variants Rated Current [A] Filter-Type Order Number 1 Standard Version KPF1.1 2 Standard Version KPF2.1 4 Standard Version KPF4.1 6 Standard Version KPF6.1 8 Standard Version KPF8.1 10 Standard Version KPF0.1 1 Medical Version (M5) KPF1.3 2 Medical Version (M5) KPF2.3 4 Medical Version (M5) KPF4.3 6 Medical Version (M5) KPF6.3 8 Medical Version (M5) KPF8.3 10 Medical Version (M5) KPF0.3 Packaging unit 50 Pcs The specifications, descriptions and illustrations indicated in this document are based on EMC Products current information. All content is subject to modifications and amendments.