GBJ6A ~ GBJ6M Elektronische Bauelemente VOLTAGE 50V ~ 1000V 6.0 AMP Glass Passivated Bridge Rectifiers RoHS Compliant Product A suffix of “-C” specifies halogen-free. ƔFEATURES . Surge overload rating – 125 amperes peak . Ideal for printed circuit board . Reliable low cost construction utilizing Molded plastic technique . Plastic material has underwrites laboratory Flammability classification 94V-0 . Polarity: marked on body . Mounting position: Any ƔMAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Rating 25 к ambient temperature unless otherwise specified. Resistive or inductive load, 60Hz, For capacitive load, derate current by 20%. GBJ6A TYPE NUMBER SYMBOL Maximum Recurrent Peak Reverse Voltage VRRM 50 Maximum RMS Voltage VRMS 35 Maximum DC Blocking Voltage VDC 50 Maximum Average Forward (with heatsink Note2) I(AV) Rectified Current @ TC=100к(without heatsink) Peak Forward Surge Current, 8.3 ms single IFSM half Sine-wave superimposed on rated load (JEDEC method) Maximum Forward Voltage at 2.0A VF Maximum DC Reverse Current Ta=25 к IR at Rated DC Blocking Voltage Ta=125 к I2t Rating for fusing (t<8.3ms) I2t Typical Junction Capacitance CJ per element (Note1) Typical Thermal Resistance (Note 2) RșJC Operating Temperature Range TJ Storage Temperature Range TSTG NOTES: 1. Measured at 1.0 MHz and applied reverse voltage of 4.0V D.C. 2. Device mounted on 75mm x 75mm x 1.6mm Cu Plate Heatsink. http://www.SeCoSGmbH.com/ 01-Jun-2002 Rev. A GBJ6B GBJ6D GBJ6G GBJ6J GBJ6K GBJ6M 100 70 100 200 140 200 400 280 400 6.0 2.8 600 420 600 800 560 800 1000 700 1000 UNITS V V V A 170 A 1.0 5.0 500 120 V A2S 55 pF 1.8 - 55 ~ + 150 - 55 ~ + 150 к/W к к µA Any changing of specification will not be informed individual Page 1 of 2 GBJ6A ~ GBJ6M VOLTAGE 50V ~ 1000V 6.0 AMP Glass Passivated Bridge Rectifiers Elektronische Bauelemente ƔRATING AND CHARACTERISTIC CURVES Fig. 2 - Maximum Non-Repetitive Surge Current Peak Forward Surge Current, Amperes Average Forward Current Amperes Fig. 1 - Forward Current Derating Curve With Heatsink 6.0 5.0 4.0 Without Heatsink 3.0 Single Phase Half Wave 60Hz Resistive or Inductive Load 2.0 0.0 0 20 40 60 80 100 120 140 Case Temperature, C 180 160 140 120 100 80 60 40 Single Half-Sine-Wave (JEDEC Method) 20 0 0 10 20 50 100 Fig. 4 - Typical Forward Charactistics 10 Instantaneous Forward Current, (A) Capacitance, (pF) 5 Number of Cycles at 60 Hz Fig. 3 - Typical Junction Capacitance 100 TJ = 25oC, f = MHz 10 1.0 1.0 2 4.0 10.0 1.0 0.1 0.01 0 100 Reverse Voltage, Volts o TJ = 25 C Pulse Width: 300 us 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 Instantaneous Forward Voltage, Volts 1.8 Fig. 5 - Typical Reverse Characteristics Instantaneous Reverse Current, (uA) 1000 o 100 TJ = 125 C o TJ = 100 C 10 o 1.0 TJ = 50 C o TJ = 25 C 0.1 0 20 40 60 80 100 Percent of Rate Peak Reverse Voltage, % http://www.SeCoSGmbH.com/ 01-Jun-2002 Rev. A Any changing of specification will not be informed individual Page 2 of 2