RGL34A THRU RGL34M VOLTAGE 50V ~ 1000V Elektronische Bauelemente 0.5AMP Surface Mount Fast Recovery Rectifiers RoHS Compliant Product A suffix of "-C" specifies halogen-free DO-213AA/ SOD-80/ Mini Melf FEATURES * Low forward voltage drop * Low leakage current * High reliability SOLDERABLE ENDS .145(3.683) .022(.559) .131(3.327) .016(.406) MECHANICAL DATA .066(1.67) .060(1.52) * Case: Molded plastic * Epoxy: UL 94V-0 rate flame retardant * Metallurgically bonded construction * Polarity: Color band denotes cathode end * Mounting position: Any * Weight: 0.015 grams Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Rating 25 C ambient temperature unless otherwise specified. Single phase half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. TYPE NUMBER RGL34A RGL34B RGL34D 50 35 50 100 70 100 200 140 200 Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current RGL34G RGL34J 400 280 400 600 420 600 RGL34K RGL34M UNITS 800 560 800 1000 700 1000 V V V .375"(9.5mm) Lead Length at Ta=55 C Peak Forward Surge Current, 8.3 ms single half sine-wave 0.5 A superimposed on rated load (JEDEC method) Maximum Instantaneous Forward Voltage at 0.5A Maximum DC Reverse Current Ta=25 C 30 1.3 5.0 A V µA at Rated DC Blocking Voltage Ta=100 C Maximum Reverse Recovery Time (Note 1) Typical Junction Capacitance (Note 2) Operating and Storage Temperature Range TJ, TSTG µA 100 150 250 15 -65 +175 500 nS pF C NOTES: 1. Reverse Recovery Time test condition: IF=0.5A, IR=1.0A, IRR=0.25A 2. Measured at 1MHz and applied reverse voltage of 4.0V D.C. http://www.SeCoSGmbH.com 01-Jun-2002 Rev. A Any changing of specification will not be informed individual Page 1 of 2 RGL34A THRU RGL34M VOLTAGE 50V ~ 1000V Elektronische Bauelemente 0.5AMP Surface Mount Fast Recovery Rectifiers RATING AND CHARACTERISTIC CURVES (RGL34A THRU RGL34M) FIG.1-TYPICAL FORWARD FIG.2-TYPICAL FORWARD CURRENT DERATING CURVE AVERAGE FORWARD CURRENT,(A) CHARACTERISTICS 10 3.0 1.0 0.6 0.5 0.4 Single Phase 0.3 Half Wave 60Hz Resistive Or Inductive Load 0.2 0.1 0 0 20 40 Tj=25 C 60 80 100 120 140 160 180 200 AMBIENT TEMPERATURE ( C) Pulse Width 300us 1% Duty Cycle 0.1 FIG.4-MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT .01 .6 .8 1.0 1.2 1.4 1.6 1.8 2.0 FORWARD VOLTAGE,(V) FIG.3- TEST CIRCUIT DIAGRAM AND REVERSE RECOVERY TIME CHARACTERISTICS 50W NONINDUCTIVE 10W NONINDUCTIVE ( ) (+) D.U.T. 25Vdc (approx.) PULSE GENERATOR (NOTE 2) ( ) PEAK FORWAARD SURGE CURRENT,(A) INSTANTANEOUS FORWARD CURRENT,(A) 50 50 40 30 Sine Wave JEDEC method 10 0 1 5 (+) 1W NONINDUCTIVE 8.3ms Single Half Tj=25 C 20 50 10 100 NUMBER OF CYCLES AT 60Hz OSCILLISCOPE (NOTE 1) FIG.5-TYPICAL JUNCTION CAPACITANCE NOTES: 1. Rise Time= 7ns max., Input Impedance= 1 megohm.22pF. JUNCTION CAPACITANCE,(pF) 2. Rise Time= 10ns max., Source Impedance= 50 ohms. trr | | | | | | | | +0.5A 0 -0.25A 15 10 5 0 -1.0A 1cm SET TIME BASE FOR .01 .05 .1 .5 1 5 10 50 100 REVERSE VOLTAGE,(V) 50 / 10ns / cm http://www.SeCoSGmbH.com 01-Jun-2002 Rev. A Any changing of specification will not be informed individual Page 2 of 2