S5M62GR
CMOS Positive
Elektronische Bauelemente
Voltage Regulator
RoHS Compliant Product
Description
The S5M62GR series are highly precise, low consumption
positive voltage regulators, manufactured using CMOS
and laser trimming technologies. The series achieves high
output current, with low input-output voltage differentials,
and consists of a high precision voltage reference, an error
correction circuit, and an output driver with current limitation.
With good transient response, output remains stable even
during load changed. Also, having high ripple rejection
ratios, the series can be used with low power supply noise.
The CE input enables the output to be turned off, resulting
in reduced power consumption. With regards to the CE
function, as well as the positive logic S5M62GR series is
also available.
REF.
Features
* Small Input-Output Differential:IOUT=160mA@VOUT=3V with a 0.38V differential
* Highly Accruate: Output Voltage ± 2%
* Low Power Consumption: Typ. 13uA@VOUT=5V
* Output Voltage Range: 2.1V~5V in 0.1V increments
A
B
C
D
E
F
Millimeter
Min.
Max.
4.40
4.60
4.05
4.25
1.50
1.70
1.30
1.50
2.40
2.60
0.80
-
REF.
G
H
I
J
K
L
Dimensions
Millimeter
3.00 REF.
1.50 REF.
0.40
0.52
1.40
1.60
0.35
0.41
5 ° TYP.
* Input Stability: Typ. 0.2%/V
* Output Voltage Temperature Characteristics: Typ. ± 100ppm/oC
* Max. Output Current: 150mA (Within Max. Power Dissipation, VOUT=3V)
Applications
* Voltage Supplies For Cellular Phones
* Palmtops
* Battery Powered Equipment
* Cameras, Viedo Recorders
Block Diagram
Typical Application Circuit
http://www.SeCoSGmbH.com/
01-Jun-2002 Rev. A
Any changing of specification will not be informed individual
Page 1 of 8
S5M62GR
CMOS Positive
Elektronische Bauelemente
Voltage Regulator
Function List
Sereis
Voltage Output
CE
S5M62GR
S5M62GP
High
ON
Low
OFF
High
ON
Low
OFF
o
Absolute Maximum Ratings Ta=25 C
Parameter
Symbol
Input Voltage
VIN
Ratings
Unit
12
V
500
mA
Output Current
IOUT
Output Voltage
CE Input Voltage
VOUT
VCE
Operating Ambient Temperature
Topr
-30~+80
Storage Temperature
Tstg
-40~+125
PD
500
Continuous Total Power Dissipation
VSS-0.3~VIN+0.3
V
V
o
C
VSS-0.3~VIN+0.3
o
C
mW
Note: IOUT must be less than Pd/(VIN-V OUT)
Electrical Characteristics Ta=25
S5M62GR-50 VOUT (T) =5.0V (Note1)
Parameter
Symbol
VOUT (E)
Output Voltage
(Note2)
Max. Output Current
Load Stability
Input-Output
Voltage Differential
(Note3)
Supply Current1
Supply Current2
Input Stability
Input Voltage
Output Voltage
Temperature
Characteristics
CE Input Voltage “High”
CE Input Voltage “Low”
CE Input Current “High”
CE Input Current “Low”
IOUT max
VOUT
Vdif1
Vdif2
ISS1
ISS2
VOUT
VIN*VOUT
Condition
VIN=6.0V, IOUT=40mA
VCEH
VCEL
ICEH
ICEL
TYP
Max
4.900 5.000 5.100
Unit
Circuit
V
1
VIN=6V, VOUT(E) 4.5V
180
-
-
mA
1
VIN=6V, IOUT=1mA to 100mA
-
40
80
mV
1
IOUT=100mA
-
165
330
IOUT=200mA
-
330
660
VIN=VCE=6V
-
13
21
A
2
VIN=6V, VCE=VSS
-
-
0.1
A
2
IOUT=40mA
VIN=6V to 10V
-
0.2
0.3
%/V
1
-
-
10
V
-
-
±100
-
ppm/
1.5
-
-
V
1
-
-
0.25
V
1
VIN
VOUT
Topr*VOUT
Min
-30
IOUT=40mA
Topr 85
mV
1
1
VCE=VIN
-
-
5.0
A
2
VCE=VSS
-0.2
-0.05
0
A
2
Note 1: VOUT (T) =Specified Output Voltage.
2: VOUT (E) =Effective Output Voltage (i.e. the output voltage when “VOUT (T) +1.0V” is provided at the VIN pin while maintaining a
certain IOUT value).
(Note5)
(Note4)
3: Vdif={V IN1
-VOUT1
}
4: VOUT1=A voltage equal to 98% of the Output Voltage whenever an amply stabilized IOUT {VOUT (T)+1.0V} is input.
5: VIN1=The input voltage when VOUT1appears as input voltage is gradually decreased.
.
http://www.SeCoSGmbH.com/
01-Jun-2002 Rev. A
Any changing of specification will not be informed individual
Page 2 of 8
S5M62GR
CMOS Positive
Elektronische Bauelemente
S5M62GR-30 VOUT (T) =3.0V (Note1)
Parameter
Symbol
VOUT (E)
Output Voltage
(Note2)
Max. Output Current
Load Stability
Input-Output
Voltage Differential
(Note3)
Supply Current1
Supply Current2
Input Stability
Input Voltage
Output Voltage
Temperature
Characteristics
CE Input Voltage “High”
CE Input Voltage “Low”
CE Input Current “High”
CE Input Current “Low”
IOUT max
VOUT
Vdif1
Vdif2
ISS1
ISS2
VOUT
VIN*VOUT
Voltage Regulator
Condition
VIN=4.0V, IOUT=40mA
VCEH
VCEL
ICEH
ICEL
TYP
Max
2.940 3.000 3.060
Unit
Circuit
V
1
VIN=4V, VOUT(E) 2.7V
150
-
-
mA
1
VIN=4V, IOUT=1mA to 80mA
-
45
90
mV
1
IOUT=80mA
-
200
395
IOUT=160mA
-
380
770
VIN=VCE=4V
-
11
19
A
2
VIN=4V, VCE=VSS
-
-
0.1
A
2
IOUT=40mA
VIN=4V to 10V
-
0.2
0.3
%/V
1
-
-
10
V
-
-
±100
-
ppm/
1.5
-
-
V
1
V
1
VIN
VOUT
Topr*VOUT
Min
-30
IOUT=10mA
Topr 85
mV
1
1
-
-
0.25
VCE=VIN
-
-
5.0
A
2
VCE=VSS
-0.2
-0.05
0
A
2
Note 1: VOUT (T) =Specified Output Voltage.
2: VOUT (E) =Effective Output Voltage (i.e. the output voltage when “VOUT (T) +1.0V” is provided at the VIN pin while maintaining a
certain IOUT value).
(Note5)
(Note4)
3: Vdif={VIN1
-VOUT1
}
4: VOUT1=A voltage equal to 98% of the Output Voltage whenever an amply stabilized IOUT {VOUT (T)+1.0V} is input.
5: VIN1=The input voltage when VOUT1appears as input voltage is gradually decreased.
Test Circuit
Circuit1
Circuit2
ht tp://www.SeCoSGmbH.com/
01-Jun-2002 Rev. A
Any changing of specification will not be informed individual
Page 3 of 8
S5M62GR
CMOS Positive
Elektronische Bauelemente
Voltage Regulator
Characteristics Curve
(1) Output Voltage vs. Output Current
VOUT=5V
VIN=6V
VOUT=3V
VIN=4V
(2) Output Voltage vs. Input Voltage
VOUT
V
VOUT=3V
T OPR=25
T OPR=25
VOUT=5V
VOUT=3V
T OPR=25
T OPR=25
(3) Input/Output Voltage Differential vs. Output Current
VOUT=5V
http://www.SeCoSGmbH.com/
01-Jun-2002 Rev. A
VOUT=3V
Any changing of specification will not be informed individual
Page 4 of 8
S5M62GR
CMOS Positive
Elektronische Bauelemente
Voltage Regulator
(4) CE Pin Threshold Voltage vs. Input Voltage
VOUT=5V
VOUT=3V
(5) Supply Current vs. Input Voltage
VOUT=5V
VOUT=5V
VOUT=
VOUT=
3V
3V
(6) Output Voltage vs. Ambient Temperature
VOUT=5V
http://www.SeCoSGmbH.com/
01-Jun-2002 Rev. A
VIN=6V
VOUT=3V
VIN=4V
Any changing of specification will not be informed individual
Page 5 of 8
S5M62GR
CMOS Positive
Elektronische Bauelemente
Voltage Regulator
(7) Supply Current vs. Ambient Temperature
VOUT=5V
VIN=6V
VOUT=3V
VIN=4V
(8) Input Transient Response 1
VOUT
=5V
VOUT
=5V
VOUT=3
V
VOUT=3
V
(9) Input Transient Response 2
VOUT
=5V
ht tp://www.SeCoSGmbH.com/
01-Jun-2002 Rev. A
VOUT
=5V
Any changing of specification will not be informed individual
Page 6 of 8
S5M62GR
CMOS Positive
Elektronische Bauelemente
Voltage Regulator
(9) Input Transient Response 2
VOUT=3V
VOUT=3V
(10) Load Transient Response
VOUT=5V
VOUT=3V
(11) CE Pin Transient Response
VOUT=5V
VOUT=3V
http://www.SeCoSGmbH.com
01-Jun-2002 Rev. A
VIN=6V
VIN=4V
VOUT=5V
VOUT=3V
VIN=6V
VIN=4V
Any changing of specification will not be informed individual
Page 7 of 8
S5M62GR
CMOS Positive
Elektronische Bauelemente
Voltage Regulator
(12) Ripple Rejection Rate
VOUT=5
V
http://www.SeCoSGmbH.com
01-Jun-2002 Rev. A
VIN=6VDC+1VP-PAC
VOUT=
3V
VIN=4VDC+1VP-PAC
Any changing of specification will not be informed individual
Page 8 of 8